MikroTik

dgonzalezh

Hey there prosteen, I´d suggest your start from scratch on a clean device, if you can access the router via IP or MAC Winbox go to System > Reset Configuration and check "no default" configuration. After reset, go to wireless and click on "Setup repeater", on the pop up window in...

dgonzalezh

Its explanation is very logical, I will have to accommodate the filter rules with its example and the mangroves with the example of a PCC of Mikrotik's web. I appreciate your time and teaching! That's what happens when people just copy/paste rules and stuff from the web, even the wiki without readi...

dgonzalezh

I'm using "DN=My very special name" It was a wrong direction. I got it working both on MacOS/iOS and Windows 10 with the same certificate. In W10 it works pretty straight forward, while on iOS/MacOS it needs to be configured as "none" and then certificate chosen. When configurin...

dgonzalezh

Sometimes that happens to me here in Colombia with some providers, I usually unplug the modem for a minute or so and then plug it back, usually it works.

If it does not work for you, try to clone modem's mac on your RB.

HTH

dgonzalezh

Como puedo comprar el libro en México

Querido amigo, puedes adquirirlo via Amazon; en forma digital. Si lo deseas fisico : podemos o enviártelo vía correo normal.

Para más información, puedes escribir al whatsapp +57 em312-770-4122

Saludos

dgonzalezh

Llega a Colombia la primera edición del primer libro totalmente original en español acerca de esta magnífica plataforma. El instructor de TikAcademy, David González Herrera tras cinco años de capacitaciones y certificaciones a nivel mundial, fue recolectando las preguntas más frecuentes, las configu...

dgonzalezh

You need to run RSVP protocol on cisco interfaces too, otherwise resource reservation along the path will not be possible. Also depending on what Te tunnel path type you are using, if CSPF is used then you also need to configure OSPF on Cisco to work with CSPF Thank you very much ! After enable RSV...

dgonzalezh

Hello again everyone, I'd like to follow up on my MPLS learning and testing, first of all to tell you that I got the simulated and real scenarios depicted here: MPLS+ BGP VPLS now VLANs over the MPLS backbone Devices: (all running MPLS) 2 Cisco 2821 (these are the LSR) 1 CCR1009 > LER 1 CRS125 > LER...

dgonzalezh

If you can ping web-sites, but you're unable to visit them, it's most likely an MTU issue from experience. On the Mikrotiks you need to ensure you have an MPLS MTU of at least 1530 to allow an MTU of 1500 on VPLS. I think you need to setup that even higher if you have tagged ethernet on the VPLS......

dgonzalezh

Hello everyone. Basically I setup this MPLS topology first on EVE-NG, then live on my lab, the two cisco RTRs (2821) and RouterBOARDS all connected and able to ping each other, as per the picture; OSPF, MPLS and BGP peering work fine, I setup VPLS static tunnels between R1 and RB_206, added them to ...

dgonzalezh

can you tell what did not work? Maybe I can update article you are mentioning with your updated version? Janis, Sorry to jump in on this old post, but it is definitely the only script that worked for my on v6.32 (v6.x), I tried both of them at the wiki with no luck. I wanted to register at the wiki...

dgonzalezh

Ok everyone, this was an easy fix, As @troffasky suggested, I went ahead and implemented it and it did the trick, that's what VLANs are for, aren't they?. Here's what I did, it may server for anyone interested or facing this same issue, different approaches or scenarios, but at the end of the day, V...

dgonzalezh

@troffasky, now, that's what I'm talking about, I didn't put it in the right way there, but here's what I think. Setup the Arris <> MT with three untagged access ports connected to the Arris, tag the trunk port with eg: vlan1, vlan2, vlan3, connect the trunk-clae to the downstairs MT's trunk port wh...

dgonzalezh

Hello there guys, Ihave the following scenario and want expert input on the problem I'm facing. I have the ISP 4 Ethernet-port cable modem in bridge mode, apparently due to setup or bug -- who knows -- this device gives away public IPs on each of the ports. I want to exploit this and I tried connect...

dgonzalezh

Hi all, I'm very enthusiastic about becoming a Miktoik certified trainer and startgiving classes here in Colombia. As a side note -- I even ditched ccna classes to focus only on Mikrotik. I did a presentation on Port Based VLANS at Bogota's 2015 MUM and after that hundreds of teaching proposals have...

dgonzalezh

Hello @all, Unfortunately I wasn't able to login to the Bug Tracker, tried to open an account and the Captcha didn't show, anyways. I wanted to know if this has happened to anyone, Model: hAP Lite OS: v6.31 Scenario, When I try tyo create a VirtualAP under Wireless I get an error saying "Couldn...

dgonzalezh

@normis, Thanks for the announcement, I just opened the CCR1009 I got from you after my presentation at the MUM and I'll test 6.31 ASAP. I'll leave my CRS with the reliable 6.28 as it's serving some clients after I test with CCR, I'll switch and let you know. Finally it's great to know that the CHR ...

dgonzalezh

at max it is small office and Home-office (where noise is big problem
the CCR1009 has the power to run a medium sized ISP, so, I don't agree to the above.

I agree 100% with Normis, these products are ISP grade products.

dgonzalezh

+1. it's fine by me, I think it's a great way of keeping track of what you're using and what to expect from net ROS versions. And as you mention a wa for people to upgrade according to their needs, for instance "6.30.3, Ok, a must for my production router" or "6.31, this will go into ...

dgonzalezh

Happy National Holidays to Latvia.

Grammar errors, courtesy of Google LOL

dgonzalezh

Right back at ya!, also please do remember to rate helpful posts

Thank you !

Sent from my iPhone using Tapatalk

dgonzalezh

Hello everyone,

I just made another video of my personal labs and tests here at home and I'd like to share it with you.

In this video I'll try to explain the easiest way I found to implement dynamic routing between ROS and a Cisco 2821 router.

Enjoy

Have a nice day!.

dgonzalezh

Hola a tod@s, Hoy quiero compartiles este video acerca de la configuración de un roouter Mikrotik CRS109-8g con VLANs basadas en puerto y un switch Cisco 2960G que funcionará como extensión a estas dos redes. El video muestra, como un simple laboratorio de como se configuran las VLANs basadas en pue...

dgonzalezh

Saludos desde Medellin, muchas gracias. For the chip: /interface ethernet switch> print name: switch1 type: QCA-8513L Thankls again and happy to receive feedback. interesting its the same chip that CRS 125 uses greetings from Bogotá

dgonzalezh

First, thanks for watching the video, hope it was helpful for you and other viewers. Second, thanks for pointng out the typo, I've corrected it, CRS, I've got the OpenSSL CSRs (Certificate Signing requests) on my head all the time. Finally my model is the CRS109-8G-1S-2HnD-IN http://routerboard.com/...

dgonzalezh

Hello All, I've followed the following tutorials to setup my PCC WAN boding: Scenario CRS109-8G-1S-2 WAN1=ether1 WAN2=ether2 Port Based VLAN Based on http://wiki.mikrotik.com/wiki/Manual:CRS_examples#InterVLAN_Routing VLAN10 = 172.16.10.0/24 VLAN167 = 192.168.167.0/24 VLAN254 = 192.168.254.0/24 br-l...

dgonzalezh

Hello my Mikrotik follow lovers. David right here, I'd like to share with you a video I created with intrsuctions on setting up Mikrotik's CRS series devices with port based VLANs, linnk on YouTube here: cCzgcl-E_TA Hope you enjpoy it; any suggetsions improvements I'm open and more than glad to hear...

dgonzalezh

Hey there, Great post I'd like to know if that'd apply to my personal setup, I've setup my MK with the PCC routing guide to load balance my two WANs, but I'd like to use one of them just to upload, outgoing Dropbox and FTP out stuff as it's way faster than the other connection I'd love to use these ...

dgonzalezh

Hi, I've got the RB493AH with two WANs setup to load balance and quasi-bonding these two WANs but one of them has amazing upload speed which the other one lacks so I know I could achieve those using QoS queues, to direct all uploads/outgoing traffic through one of the links failing over to the slowe...

dgonzalezh

Hey cbrown, Thank you for taking the time to answer; I found a useful page on hidemyass.com (http://wiki.hidemyass.com/Mikrotik_Router_PPTP_and_L2TP_Setup) although it cleared some of black holes I had configuring it and following routing form my LAN could ping and connect to services on the VPN net...

dgonzalezh

Hello guys at Mikrotik, Let;s try another approach to see if I get an answer :(. I have setup PCC routing load balancing on my mikrotik using: http://aacable.wordpress.com/2011/07/27/mikrotik-dual-wan-load-balancing-using-pcc-method-complete-script-by-zaib/ I've setup a pptp connection to my office ...

dgonzalezh

Hello, people I just fell in love with Mikrotik you know it's the only solution I could fin to bond together my two WANs and now I have a brutal 50MBits connection thanks to this great project. I have my RB493 with case from ebay coming soon and I really need to make the most out of this puppy. Now ...

Search found 32 matches

Re: MikroTik wAP ac station configuration

Re: Load Balancer PCC + Firewall to same MK

Re: IKE2 identity not found (IOS to Mikrotik) [SOLVED]

Re: no WAN?

Re: Presentando el Workbook de Mikrotik RouterOS.

Presentando el Workbook de Mikrotik RouterOS.

Re: MPLS-TE tunnels not established [SOLVED]

MPL TE RouterOS as PE/CE cisco as backbone lab

Re: MPLS LAB Mikrotik as PEs and cisco as LSRs

MPLS LAB Mikrotik as PEs and cisco as LSRs

Re: Script for he.net IPv6 Tunnelbroker

[SOLVED] - Cable modem, multiple dynamic public IPs through one cable.

Re: Cable modem, multiple dynami public IPs through one cable.

[SOLVED] - Cable modem, multiple dynamic public IPs through one cable.

Training: I'd like to be a certified trainer.

6.31 Bug (Couldn't post on bug tracker)

Re: 6.31 released

Re: CCR1009-8G-1S-1S+ General info & Questions

Re: Comments about RouterOS release schedule

Laimīgs valsts svētki Latvija

Re: [VIDEO] Mikrotik and Cisco OSPF tutorial

[VIDEO] Mikrotik and Cisco OSPF tutorial

[VIDEO] Mikrotik VLANs hecho facil

Re: [VIDEO] Mikrotik Port Based VLANs on CRS

Re: [VIDEO] Mikrotik Port Based VLANs on CRS

Dual WAN and multiple 2 internal netwoks issues

[VIDEO] Mikrotik Port Based VLANs on CRS

Re: Working QoS configuration

Very basic QoS for two WAN setup

Re: Newbie routing question

Newbie routing question

RouterOS and balancing connections