all the problem was solved reconfiguring all again in the bridge switch Current config: 1 - only one bridge with all ports inside and Hardware of OffLoad enabled 2 - Isolate the ports than we want E.g: port1 + port2 + port9 = line ISP1 and trunk for each router port3 + port4 + port11 = line ISP2 an...

i have CRS326-24G+2Q+ . i have 8 remote sites which is connected to CRS326 ,let `say it A,B,C,D,E,F,G,H . Each remote sites connected with 2 link with 802.3ad Bonding to CRS326 A remote site is only using vlan 10,20 B remote site is only using vlan 30,40 C remote site is only using vlan 50,60 D remo...

For x86 and CHR there is no SFP menu tab . Hope to add this feature in future release

Dear ,
Actually i have 11 WAN .Previously i posted for example....... .. i want 6WAN for all traffic including 80,443 , and the rest of 5 WAN for 80 and 443 only , if i use it to Policy Based Routing ... there is alot of bandwidth for waste ....is any solution for that ?

Dear , i `m using loadbalancing PCC method with 2 WAN , but i just want to use WAN2 for only 80,443 for loadbalancing with WAN1 , this is my config /ip address add address=192.168.0.1/24 network=192.168.0.0 broadcast=192.168.0.255 interface=Local add address=192.168.1.2/24 network=192.168.1.0 broadc...

Yes, From DMA Softlab Documentation......just only for one step Internet ------------------- Switch---------------------------- Mikrotik ---------------------------------hotspot -----------------------------Radius For me , Internet (5 WAN loadbalancing with PPPOE Client ) ether 1 to 5---------------...

Hello , Please help me .. i have CCR which has 12Ethernet ports. Ether1 to Ether5 is using 5WAN loadbalancing and Ether6 is LAN using hotspot Ether1 to Ether5 is dynamic IP address assign from PPPOE server Ether6 IP Address = 172.16.1.1/16 , DHCP enable = 172.16.2.1- 172.16.254.254 And now i want to...

it can`t get Internet from PtP output AP ................. Please help me