anyone....Rx FCS Errors ?

any ideeas?

for 1. I believe that's the correct behavior. According to the docs https://wiki.mikrotik.com/wiki/Manual:Interface/Ethernet the pause frames are received on the Mikrotik port (showing up as RX pauses) from the NAS (generating TX pauses) on the other end. rx-flow-control (on | off | auto; Default: ...

is this a SWOS (2.13) bug? do i need to switch to routerOS ?

guys, anyone, any ideeas?

Hello guys, I have a Mikrotik CRS326-24G-2S+ running version swos 2.13. I have it for about one month and a half now so it is quite new setup. I have also installed two 10G SFP+ copper modules and i experience some problems on them. The SFPs are other vendor (aliexpress for mikrotik devices). they a...

Yes, maybe I would have bought the RB1100 instead of the RB2011, but I did not want a rack-wide unit or with a fan. Yes, but what performance do you have with RB2011 ? Technical specs are way lower than RB1100's See above. And remember the RB3011 is Mikrotik's first ARM, so it is understandable if ...

The RB1200 was also interesting because it is fanless at least.

Yes, but also, what performance do you have with it? i can see CPU 680 MHz vs a dual core 1 GHz and RAM is 4 times less than RB1100's

Yes, maybe I would have bought the RB1100 instead of the RB2011, but I did not want a rack-wide unit or with a fan.

Yes, but what performance do you have with RB2011 ? Technical specs are way lower than RB1100's

Have you considered the 1100ahx2? I run a rb1100ahx2 at home with a gigabit pppoe link. It does some 920 Mbps NAT with a 80% processor load WITHOUT fastpath checked on netspeed running on the providers server. VPN performance in also ok (200 Mbps in metropolitan network, limited by the provider). I...

So everyone's suggestion goes with CCR1009-8G-1S-PC , right? it seems to be a quite powerfull device; the problem is that for home use is quite expensive - almost 500$. I am still thinking what to do, as this one overcomes greatly my initial budget. Besides that, i just want to clear one thing: as i...

You might want to do a little more searching in threads related to fastpath/fasttrack, but I seem to recall some reports of the 2011 being able to handle a gigabit if the traffic is mostly fastpath... which leads me to believe that the 850Gx2 should be able to handle this much speed with fastpath. ...

Hi guys, I am looking to replace my old home router and i would like some of your suggestions regarding a future achievment. I need a router with this specs: -gigabit ports -capable of s2s and remote VPN -VLANS -basic firewalling -pppoe capable -high NAT throughput; i will use PAT on it, so LAN subn...

Hi all, I have a Microtik OmniTik U-5HnD and a very big problem; totally unknown username and password for log in. I can't afford to reset it totally and loose everything configure on it, because it's important. Is there a way in which i can retrieve username/pass, without erasing the startup/runnin...