TLS+failed OpenVPN
Certificate migration issue
viewtopic.php?f=2&t=143045&p=743141#p743141

Same problem with certificate transfers ROS 6.44.5 Generation of certificates /certificate add name=template-CA country="RU" state="Moscow" locality="RU" organization="88888" unit="" common-name="MT-CA" key-size=4096 days-valid=3650 key-usa...

How to configure Cisco port security analog on microtik crs ? (ROS)

same problem with SFP 1G . Auto-negotiation is off. Module GL-OT-SG06SC1-1310-1550-B peremeshano works with RB2011
Mikrotik HELP!!!! All users have a problem with SFP 1G

Is this device faulty fixed, or still have issues with WAN to LAN speeds? Anyone with newer production batch to tell me? There is a problem in the transition from the WAN (L2TP) local area network Download speed 40 Mbps maximum outbound 90 Mbps. When channel 100 Mbps But best from the device shows ...

Vendor ID: 0x19d2
Device ID: 0x1403

Included Mikrotik into another outlet the result is different: system resource usb print # DEVICE VENDOR NAME SPEED 0 1:1 Linux 3.3.5 ehci_hcd RB400 EHCI 480 Mbps 1 1:4 ZTE,Incorporated ZTE WCDMA Technologies MSM 480 Mbps port print Flags: I - inactive # DEVICE NAME CHANNELS USED-BY BAUD-RATE 0 seri...

I have the same problem. Tried to add a USB powered hub. LTE air interface does not appear

Is it possible the CR router to configure the OS to not use NAT arm ?
use NAT Gateways?

model: CRS125-24G-1S-2HnD

firmware-Type: ar9344
factory firmware: 3.24
current-firmware: 3.33
firmware update: 3.33


RouteOS 6.36

Ceased to see USB modems ZTE 830FT

> USB printing system resource
0 1:1 Linux 3.3.5. ehci_hcd RB400 interface advanced host controller

 After update from 6.35.4 prerouting mangle not working.

Code: Select all

/ ip firewall mangle chain=prerouting action=mark-routing new-routing-mark=second_provider src-address-list=second_conn_list

I downgrade to 6.35.6 - prerouting working.

Where to download 6.35.6 ?

Good afternoon.

I wanted to specify.

correction: l2tp - fixed crash when rebooting or disabling l2tp while there are still active connections;
It to treat L2-SERVER?

Who means this correction? 

I'll add schemas to the story above.

In this mode, some sites were not opened This all is well

Is there a program hacking password backup for RouterOS v6.35?
Forgotten passwords

unfortunately I have no config. so to no equipment.
You can:
1) configure LTE
2) Create a VLAN on SXT LTE
2) Create VLANs on mikrotik
3) Sebright VLAN on SXT-LTE c lte, and out eth1
4) Connect the SXT LTE and mikroitk
5) Hang VLAN on eth1
6) Set ip address on VLAN

Not implemented . I am looking for a solution . More specifically there is no equipment to test

Do not argue , but you need to try at the there is such problem, but do not have the equipment to test

I think my solution is suitable http://forum.mikrotik.com/viewtopic.php?t=104733

I have the same problem. Think SXT-LTE need to disable Connection tracking Firewall=no
To create a VLAN , to unite with lte out
On RB2011 port example (eth1) to combine with VLAN and then you should work. Sorry for my English

Screenshot У меня билайн и флекс оба Dual L2TP и оба работают все настраиваеться.. Я бы сказал большая проблема в том, что нет жесткой привязки L2TP к интерфейсу как в PPOE I beeline and flex both Dual L2TP and both work all nastraivaetsya .. I would say the biggest problem is that there is no rigi...