MikroTik

jetelina

Thanks. I understeand that there is a lot of work with version 7.
Great to hear that it is moving

jetelina

Hi, I'm used that there was new firmware almost every week. Now there is latest thing the Testing branch and from 5th July 2021 - more than month ago. Few days ago I saw in news "Latvia declared a state of emergency" https://www.reuters.com/world/europe/lithuanian-parliament-debate-buildin...

jetelina

But that one should have a RAMdisk already. You are right. It was enough just to read the manual. Here is described: Warning: If device has a directory named "flash" in its file list, then files which you want to be kept after system reboot/power cycle must be stored within it. As anythin...

jetelina

+100

Why this isn't implemented already? I have CRS328-24P-4S+RM, it has 512 MB RAM and only 16 MB FLASH and it does NOT have USB port!

jetelina

Hi, I have two devices CRS328-24P-4S+RM + hAP ac and I have upgraded to 6.47. All done via Winbox 3.24. Here are some bugs: 1. Previously the icon for disabled user was gray, currently is red. Should be gray. Happens on both devices. 2. When I exported my settings with command [code]export file=yyyy...

jetelina

After upgrading to 3.22 windows organization got little messy.
Top left corner of most of windows is on correct position, but width and height is not saved.
When window is on the bottom of screen, the default with and height is used and thus also top left corner is moved up.

jetelina

I mainly wanted to point that as indroor is marked only 5170-5250, but it should be 5150–5350. Anyway the best feature would be to indicate indoor/outdoor frequencies, because there are penalties when you use indoor frequency for 1 Km hop. Of course the responsibility is on the admin to configure it...

jetelina

Hi, thank you for latest feature for wireless /interface wireless info country-info My device is hAP ac with firmware 6.43.11. I have tried the command and it returned follwing: [user@router] /interface wireless info> country-info country: czech republic ranges: 2402-2482/b,g,gn20,gn40(20dBm) 2417-2...

jetelina

Hi, after upgrade to 6.41.4 I have noticed in log message "installed wireless @ -6.41.4" Few lines above there is "verified wireless-6.41.4-mipsbe.npk", which is correct. After upgrade in System - Packages shows correct "wireless" with version. I think I have also seen ...

jetelina

guy, can anyone prove that dnsdynamic service is still alive?

I have come across this service and tried to register, but it looks dead. I didn't received account confirmation email.

jetelina

Hi,
this is known bug.

See these two threads:
http://forum.mikrotik.com/viewtopic.php?f=1&t=107742

http://forum.mikrotik.com/viewtopic.php ... 15#p535206

jetelina

Thanks, same issue here

jetelina

Hi, yesterday I have upgraded from 6.35 to 6.35.1. - I have dual WANs configured according to script on this page https://aacable.wordpress.com/2011/07/27/mikrotik-dual-wan-load-balancing-using-pcc-method-complete-script-by-zaib/ With 6.35 everything is working. - I have static + active 3 routes add...

jetelina

Somehow I found the solution myself. So here is the code. :global iq [/ip address find interface="non-existing-eth"] :if ([:len $iq] != 0) do={ :log info "exist"; } else={ :log warn "Not exist"; } It works this way... - It try to find interface "non-existing-eth&qu...

jetelina

Guys, can you please help me with script? I'm trying to achive "if interface doesn't have valid IP log warning else do some action" Script that I'm using is like: :log info "debug 0"; :global iq [/ip address get 2 address]; log info "debug iq - $iq"; If interface 2 is d...

jetelina

Hi, can you please update manual page - Manual:System/Packages? http://wiki.mikrotik.com/wiki/Manual:System/Packages Especially the Wireless packages are always confusing me. - Can you add there something like wireless - description (deprecated) wireless-fp - description (deprecated) wireless-rep - ...

jetelina

Hi, I like your switch "CRS125-24G-1S-RM", but I would like it to have all 24 giga ports with Pover over Ethernet. So that I can power up IP phones and video cams. Also it would be good to have it with integrated power supply and 220V power socket IEC C14 - to use normal power cord from UP...

jetelina

Hi, I have noticed on Tuesday afternoon that RouterOS 6.32 was available on http://www.mikrotik.com/download - Later that day there is available on 6.31 - Current branch - Also my router offered it for download - And when I modify the link I can download it http://download2.mikrotik.com/routeros/6.3...

jetelina

Hi, I have noticed strange issue in Quick Set that confused me. I have MikroTik RB750GL with RouterOS 6.25 - ether5 - connected to WAN1 - ether4(port disabled) - connected to WAN2 - ether3(port disabled) - not used - ether2 - connected to LAN - ether1(port disabled) - not used(previous WAN1) IP - DH...

jetelina

Hi, I'm interested in this also. I tried to put "cz.pool.ntp.org" in WebFig into NTP Client settings, but it doesn't accept that value. What is feature "*) sntp client - added support for dns lookup of ntp servers;" for? I see the following in change log: *) sntp client - added s...

jetelina

Good idea with creating a shortcut to interfaces. Thank you

jetelina

Looks tp be fixed in 6.14 (2014-Jun-06 15:34)
*) webfig - fixed quickset, it didn't work with disabled wireless pacakge;

Another question...
- Can I set what will 1st page shown after login?
- I would like to jump everytime after login to Interfaces.

jetelina

Hi, when I log into webfig I see QuickSet tab with a lot of settings. - On the beggining it showed some settings and then hide(like slowly loading) - Going from QuickSet to other page and then back helped. - Now it does not hide and I can induce it every time. MikroTik RB750GL - 6.11 - Board does no...

jetelina

Thanks for info. Don't hurry, the stability is the major thing

jetelina

Hi,
there is "What's new in 6.8 (2014-Jan-29 15:52):" on the
http://www.mikrotik.com/download/CHANGELOG_6

but when I go to http://www.mikrotik.com/download it is not there.

Any stopper was found?

jetelina

Hi, I have RB750GL firmware with configured SSTP VPN. - I can connect to VPN fine and connection to LAN is stable. - But when I open Mikrotik webfig I can only login. If I move mouse over any button, or click anything I'll get error "Router disconnected" and I need to login again. - SSTP c...

jetelina

Hi, I have enabled and configured SSTP VPN. - I can connect to VPN network without issue, but I have noticed strange records in Mikrotik log about attempts to connect. - I'm not making these connections. Are these done by some attacker from outside? - Or are these connections some SSL traffic evalua...

jetelina

Also I would have a question...
- What SSL/TLS implementation RouterOS uses?

jetelina

Hi, I have question if it is secure to use SSTP with AES on Router OS 6.4 + Windows 7? - I mean force-aes = yes , because there is article describing that SSL 3.0 and TLS 1.0 are vulnerable, and thus RC4 is recommended. Which is described also in this forum . Next question is it compatible with Wind...

jetelina

I have noticed that when there is some echo message into console after SSH logon, it breaks Mikrotik logo.
- Also IP address is broken into 3 lines

jetelina

Actually there is no error message - the page loads. - And in the botton there is "Done" with exclamation mark(with errors - wich is common). The issue is that there will remain loading screen like it's doing something... but in fact it does nothing. The best option would be really the bro...

jetelina

Winbox works. Sad is that for Windows XP is IE 8 the "latest" version of browser, that is always present.

jetelina

Hi, when I try to webfig in IE 8 login screen shows fine. But when I enter correct credential, there will appear loading bar, which is loading forever and nothing happens. Is webfig supported in IE 8? I have noticed this when I have updated from 5.25 to 6.1. - The issue still persist in 6.2. I have ...

jetelina

Hi, I just upgraded from 5.25 to 6.1. - I have copied all files from unpacked all_packages-mipsbe-6.1.zip into RB750GL and rebooted. - Next I disabled IPv6, Multicast, LCD, UPS, Calea, Wireless, Openflow, GPS, Hotspot and reboot - But after reboot it looked in WebFig that all packages are enabled - ...

Search found 34 matches

Re: What is MikroTik working on?

What is MikroTik working on?

Re: RAMdisk

Re: RAMdisk

Re: v6.47 [stable] is released!

Re: Winbox v3.22 released!

Re: country-info for czech republic

country-info for czech republic

Re: v6.41.4 [current]

Re: DNSDynamic Update Script

Re: 3 wan PCC issue

Re: PCC routes inactive after upgrade 6.35 to 6.35.1

PCC routes inactive after upgrade 6.35 to 6.35.1

Re: Script problem with /ip address get X, where X interface not exist

Script problem with /ip address get X, where X interface not exist

Request to update documentation for System/Packages

New product request CRS125-24G-1S-RM with PoE + integrated power supply

What happened to 6.32 release?

Quick Set does not recognize DHCP client on ether5

Re: v6.18

Re: QuickSet shows WiFi settings even when there is no radio

Re: QuickSet shows WiFi settings even when there is no radio

QuickSet shows WiFi settings even when there is no radio

Re: 6.8 firmware download link

6.8 firmware download link

"Router disconnected" error in webfig over SSTP VPN

Strange records in log when enabled SSTP VPN

Re: SSTP VPN with AES on Windows

SSTP VPN with AES on Windows

Mikrotik logo broken when there is echo into console

Re: webfig in IE 8?

Re: webfig in IE 8?

webfig in IE 8?

[BUG?] Disabling packages in RouterOS 6.1