Where Are u from?


Inviato dal mio iPhone utilizzando Tapatalk

When you say : 2 mt high or 3mt high, do you mean the top of antenna, point of attach of antenna, or bottom of Rb from ground?


Inviato dal mio iPhone utilizzando Tapatalk

Thanks For Help! But i ve had no good resut! In iperf test i ve only obtained 25-30 mbit of bandwidth! I belive that the only solution should be to putting down the metal from the roof to 3mt high! Do you think so?


Inviato dal mio iPhone utilizzando Tapatalk

Could me guide with step of winbox?


Inviato dal mio iPhone utilizzando Tapatalk

Yes already done. Problems are for a low bandwidth and For -88db of ccq!


Inviato dal mio iPhone utilizzando Tapatalk

Should be better another antenna OMNI at 10mt high but with lower db gain or mantaining my actual one (8db OMNI) but putting down the metal at 3mt high? Consider that at 10mt I've under the routerbord Tv VHF antenna but space around 360°, and at 3mt only a littele pole but below the wal of the house...

Up


Inviato dal mio iPhone utilizzando Tapatalk

If I put my metal at 3 mt from ground, but a little in a corner pisition of house with my actual Omni, should be best then buy low gaing Omni antenna your suggested me?


Inviato dal mio iPhone utilizzando Tapatalk

My actual is Omni 8 db 35-40 cm, why those are 2-3 db and more smaller? Wich the difference?


Inviato dal mio iPhone utilizzando Tapatalk

For you which is the best antenna to fit on my metal to cover all my area garden? Brand and type! Thanks


Inviato dal mio iPhone utilizzando Tapatalk

So IT Was a mistake to put metal at 10mt level? Beter 2-4mt? My antenna is gold wireless 8db And in specification is vertical beam 60*! Realy I detect with iPhone 6 the best signal , at level of ground ( i m 192 cm) the best signal level And I m ai 6-7 meter from the vertical of antenna! Also my pro...

Is there anybody else?


Inviato dal mio iPhone utilizzando Tapatalk

Could you Help me with a step guide?


Inviato dal mio iPhone utilizzando Tapatalk

Where is IT? My iPhone detect a excellent Wi-Fi Signal at the level of ground but i ve problem of low bandwidth in FTP internal LAN trasfer!
Antenna is a goldwise OMNI 8db with 60 degree verical beam!


Inviato dal mio iPhone utilizzando Tapatalk

Clients are in my garden around my home. And they are smartphons, tablets and notebook!


Inviato dal mio iPhone utilizzando Tapatalk

Hi,
I ve a routerboard metal 2,4ghz And i m troubleing to configure it in beast way for best performance . I ve an antenna with 8db gain And it is installed at 10mt from ground! Could you Help me step by step?


Inviato dal mio iPhone utilizzando Tapatalk

Routerboard 2100...

How can I do???

Hi,
I ve rb2100 with routeros 6.20 and i would like how can i connect a usb printer to the microusb port of rb2100 for setup a network printer. Thanks.

hi,
no help?

Inviato dal mio GT-I9300 con Tapatalk 2

hi, i ve a routerboard that i want reset configuration and setup it again. My rb is attached at modem router on eth1 port. Lan bring up from the others gigabit ports. I want to connect to internet with eth1 wan My dsl modem ip is 10.0.0.1 and ip rb should be 10.0.2.1 with the dhcp range from 2.21 to...