Well we are quite a big ISP with a lot of vendors as client routers devices behind WDS - they work well with DHCP. So far only ASUS does it. And it's still not working . Anyway only workaround i found on those AP's is to switch connected station to station-bridge.

Hello, i would like to ask/inform about an issues i noticed in past years that occur behind Mt devices. Not sure if problem is on MikroTik or router manufacturer side tho :) So we use two types of conentions of radio CPE in our ntwrk... A and B. A is for houses where antenna/router is for 1 CPE and ...

Basically this as show on picture, thousands of mikrotik devices and they cant identify themselves when sending email ? what i want to do is make an alarm for Cube60 when primary 60Ghz link goes down to send and device log to let us know that it's running on 5Ghz backup....seems like very hard to do...

Hi, simply question is there a way to identify from which router email has been sent if you have more that ONE mikrotik device ? :DD I find it ridiculous :P And manual isn't very much helpfull as well so field "from" does show receiver or sender ? Because email is sent only when i put the ...

Just let the router do it internally - instead of a script... /system logging add action=emailalert disabled=no prefix="" topics=info,interface Then change your email alert settings: /system logging action remove [find name="emailalert"] add email-to=noc@youremaildomain.com name...

Hello, did anyone found solution to Mikrotik NAT-Samsung TV problem ? here is ours : MK type SXT LITE5 AC(6.44.3) Samasung TV UE43RU7172UXXH runs Tizen OS TV is just not taking DHCP address, from my point of view discover,offer,request,ack works fine as shown in attached prtscr when i debuged it, bu...

Hey guys any solution ? I can confirm Omnitik AC POE out been affected in huge amounts in our network, using 6.44.3 as ROS and Bootloader versions, still getting the same. I even encountered issue(several times by now) where we installed a brand new omnitik and it started to reboot by watchdog all t...

Thx Anav for reply. I did another change to my previous setup and completly removed VLAN filtering function since i have been using separate bridges for VLANS. But i took your advice and tried in like u typed and its working as well with just one bridge and VLANs seems function properly, im gonna do...

Hello, i kinda need help with one particullar setting and i wonder if its achievable with VLAN filtering. So basically i would like to have L2 transparent bridge with those LHG60 units, from what i have red here on forums , it should be ok if you just connect units with bridge-station-bridge setting...

I wouldn't test both directions at once, since the radio is not fullduplex. Can't test any SXTsq since we not using them at all. Back to my case, i just finished phonecall, we had to send technician to swap that LGH 5AC(arm) device for LHG 5(mipsbe) obviously customer wasn't satisfied with speed and...

rc15 claims to fix nv2 with arm based wireless. Sxtsq Still not working. Just tested it in real conditions on LHG 5 ac. I didnt even know our storage-keeper ordered those new units with arm. So i found this forum topic. So unit came with 6.40.3 form factory i guess , so i upgraded the unit to 6.41(...

Hello, i couldnt fint a proper answer for this only in this topic below it is disscused https://forum.mikrotik.com/viewtopic.php?f=21&t=126307&hilit=radius+mac+authentication+nv2 So my question is is there a way or will mikrotik fix Radius mac authentication? We are quite a big ISP with over...

DHCP client on bridged interface I want fully transparent bridged network where DHCP client will be on WLAN1, but i also want mngmt IP(lets asumme that mngmt IP's are given by DHCP server) to be reachable from ETH, so bridging the two interfaces is easiest thing right? Mode will be station-wds. I go...

Hello, i searched forums but havent found similiar problem so i post it here. Omnitik UPA-5HnD doesnt have internal reset jumper it has only reset button. We have quite an issue now, some of our omnitik's will just die after upgrading them from software which they come to our company with, its usual...

Thx.

Hello, We have been using RBSXT-5HPnD as a client units for a while(few months), since we using scripts to configure them all, we are using max 5.11 or lower os in client devices. No problems when downgrading these units appeared. Today we used LITE version RBSXT-5nDr2 for the first time. When techn...