Hi, everybody i cannot make it to work.

When i am trying to connect to the console of the router i am getting the following error

127.0.0.1:2001 network error:connection refused

Am i missing something ?

Check If WinCap is installed correctly.

you have to set up routing everywhere, that includes host holding GNS interface with address 192.168.137.1 R1 can ping it as it is in the same network. you can check with traceroute where your packets are going and what and where is happening. I check again configuration - I do traceroute on every ...

Janisk,
in my IP config is something wrong, or it is rather problem with GNS - problem defined post above.

I added to attachment and this link whole configuration to look.

http://niespielak.eu/niespielak.eu/ROS-Static.7z

Hello, I have a problem do static routing the same like in first post's example. I cannot ping GNS interface 192.168.137.1 from R2/R3/R4 but I can ping any other site in Internet. Other thing i could download and upgrade to newest firmware pacakge in R1/R3/R4 but in R2 i get info that I cannot conne...

Hello, I have problem with: 1. I cannot capture packets beetwen CHR's links - i can do that beetwen ethernet switch link and CHR link. 2. After GNS3 update and CHR's image to newest CHR 6.32 - CHR's hosts in project stop working. In GNS everything look ok, images start up and links are green status,...

Kasparskr,
tutorial is great and everything works in Windows 10 for version 1.3.9 of GNS3. Can You make the same tutrial for next version 1.4.0 where will be used Vmware images for GNS3 and RouterOS?

Hello, last week i try to stream network traffic (few network hosts, one server about 200 Mbits network traffic) from my CRS125-24G-1S-2HnD-IN to the Snort Server - after turning it up CPU in CRS125 jump to 100%... My question is CCR1009-8G-1S-1S+PC power enough to do such streaming with masqarade, ...

I think about changes whitch were brought with RouterOS 6 version - is it implemented in "old" manual? Other thing Can You (mikrotik team) add more examples of using simple queues, and whats really mean in manual section that manual is taged as old?

Hello Folks,
when will be updated manual (http://wiki.mikrotik.com/wiki/Manual:TOC) espacially simple queue menu? Is it going to be updated?

Yesterday I bought CRS125-24G-1S-2HnD and the same situation like in other cases - ale ports have port flapping issue (CRS125 is connected straight to 751G-2HnD old one - soft 6.19) - cable witch I useing for connection must be good - on this cable worked workstation and everything was ok. I upgrade...

I renew question: Can anyone confirm if this does inter-VLAN routing on the switch chip at wire speed?

Hello Everyone, I have a few questions about Queue Tree and I hope someone cloud help me with them(nowday I have Routerboard 751G-2HnD with RouterOS 6.1 version on it): 1. How to set up queue tree without marking ("no-mark") for upload? I have done this in this way: create mangle: "ch...