MikroTik

Quared

[ironic]I became a Trainer just for using the coffe-machine in Latvia offices[/ironic]

These [ironic] tags would have made a perfect fit to your original post as well *thumbsup*

EOotD from my side

greets

Quared

Yes, please! and don't forget to send us the t-shirt and device! I suppose that sending lunch is much more difficult Enviado desde mi Mi A2 mediante Tapatalk In general, attending a MUM or any other conference is about knowledge transfer and networking, also for you ? The rest of technology world (...

Quared

Hello, RouterOS is much more configurable/flexible and powerful, thus not comparable to any of these 'typical' end-user-friendly routers and their GUIs - whether Webfig nor Winbox. Even those 'typical' end-user-friendly routers allow weak or even NO admin/access password to be set if per user-choice...

Quared

Hello,

then just follow these steps by ffilmar, just checked these on my mAP lite and config works well.

Alternative might be found here. Disable WPS afterwards.

greets

Quared

@ snoop,

where are your difficulties ?
Post your current config and be more precise about what you want to configure on your mAP lite

Sure, you've got enough knowledge about Router OS to deal with devices ..?

greets

Quared

Hello,

second interface ? secondary lan ?

Please provide some more information or a quick sketch about your setup and/or post your config

From terminal

/export hide-sensitive

greets

Quared

Hello, most people posting here need some kind of help, so first of all and since it seems that English is not your mother tongue: Short sentences and descriptive information about your problem please ;) Also a dump of your config might help, generate it in terminal with command /export hide-sensiti...

Quared

Hello,

telling you what's causing a problem in the configuration you 'created' with that little information provided ?

In Winbox, please open a terminal session, type

 /export hide-sensitive

and post the result here.

greets

Quared

Hello,

in Winbox, please open a terminal session, type

/export hide-sensitive

and post the result here.

greets

Quared

Hello,

good to hear that it was IN the setup

Reputation points are always welcome ...

greets

Quared

Hello, we're still talking about a really short distance (less than 25m with some small branches in LOS). Today evening I prepared a test-setup with one hAP ac as AP and one hAP ac lite as WiFi client on 2.4G over a distance of 40m LOS Config was quite basic from scratch and this setup had no connec...

Quared

Hello,

very poor info, what has happened and what you'd need a consultant for ?

Check consultants' section on mikrotik.com to find your nearest one also able to support you in your language

greets

Quared

Hello, short and practical from software development: Fixed is ONLY then considered to be fixed, when proofed as fixed (at least by the originator of the issue !). So as long as there's no proof of a fix, the issue is needed to be kept open. That's not only common practise in SW development but also...

Quared

Hello again, thanks for providing much more info than requested ;-) (fotos are still loading, seems that they're either big sized or Google Photos got a problem ...) Take this as a first reply out of quickly screening your Information above, more details will follow. It is a bit difficult to orchest...

Quared

Hello, Connection drops could have different causes/reasons ... 20m distance shouldn't cause any if there are no obstacles and practically you shouldn't even need any 5GHz equipment. It might help for understanding your local situation, if you'd attach some photos of the locations, seen from both en...

Quared

Positive rating of effective help is always appreciated

greets

Quared

Google might be your best friend

https://www.jfry.me/articles/2016/ipv6-netflix/

greets

Quared

Hello, you've tried to connect via ethernet port, right ? By default, there's a NAT-rule configured on ethernet port, so just try to connect to your mAP via WiFi. Therefore check for a WiFi network labelled Mikrotik ....... (the dots usually representing last MAC-address-digits) This behaviour is 'b...

Quared

Hello, if you're planning to attend the English spoken MTCIPv6E, I'd offer you to just email your request stating that you need to get recertified on MTCNA and we're going to sort out, how and when this MTCNA-info-update-session and recertification can be arranged in Milan prior to attending IPv6E. ...

Quared

Hello,

just connect via Winbox or Webfig and check upper left corner or menu System -> Resources -> Architecture Name

In terminal, type

/system resource print

and check architecture name as well

greets

Quared

Hello,

@hAP ac:
ac -> 802.11ac

5x gigabit ethernet

go for it

greets

Quared

Hello,

RB2011....2HnD.... has dual-chain 2.4G WiFi (802.11n),
802.11ac is not supported for this model

greets

Quared

Hello, using current version of Virtualbox, setting up (for example) minimal feature version of Windows XP and enabling direct access to LAN port might be your best option. Just choose your virtual network adapter to operate in mode 'network bridge' and select physical LAN Interface from dropdown li...

Quared

Hello hello i have a problem, i want to buy a license and its said that its invalid what can i do? dejBJklcWs i was thinking that it could be easy but is not different kinds of licenses are available for purchase. Are you talking about licenses P1/10/.. for CHRs or L3-L6 for x_86/Routerboards ? greets

Quared

google is your best friend for ALL your one line/one sentence forum posts

@Admins: please close this topic, thank you

Quared

Hello,

please clarify your last message !
Your text does not make sense

greets

Quared

Hello,

try to netinstall again, we've had few 751s and 951s from customers showing the same behaviour.
Every unit was recoverable via netinstall and works flawlessly since then

greets

Quared

Hello, quick question: is the ME909u-521 module identified in the LTE-menu ? If not, check your config and hardware setup, especially /system routerboard usb After this module is correctly identified as LTE, set up your provider's parameter (APN ...) and put a DHCP-client on the LTE Interface greets

Quared

you have been assisted several times but you resist to contribute to yourself and to the community by learning and clarifying your more than basic questions and come up with results

NOBODY here is going to do your job.

So start up and go into it

Quared

Hello,

did you already check the links from above ?

If not, it IS time to go for them ....

Learn how to configure Routerboard or RouterOS and start with the links
Nobody here is willing to repeat the basics already available in the wiki again and again and again ...

greets

Quared

Hello, you are mixing up some essential terms and functionalities ! Winbox is the name of the Windows application to access RouterOS-running devices. Please be aware about the difference of meaning in your drawing. You are connected via DSL to the internet, OK. "My DSL" in your drawing obv...

Quared

Hello,

to understand your request, it is necessary for you to provide more information about what you want to set up

greets

Quared

Hello,

just log into your client account ( https://www.mikrotik.com/client/ ), check on left side with "Cloud Hosted Router (CHR)" and select "all CHR keys".

greets

Quared

Hello,

please provide more information about your cloud setup (provider, settings, ...)

greets

Quared

Hello,

sure.
That's not depending on the SIM-Slot

That pretty much depends on the provider service available on the SIM card (=> consult with your provider) and the type of miniPCIe-card you're going to use (=> consult supported hardware matrix

greets

Quared

Hello,

duplicate post -> see this thread

thanks

Quared

Hello, @busla: this thread about the new packet flow diagram was started 3,5 years ago and packet flow management is a central feature of routers in general Do you really think, your problem now relates to this packet flow diagram itself ? Please try to understand the packet flow diagram by reading ...

Quared

Hello, you might think about the standard Example Test, available in the client-section of your Mikrotik-account ( https://www.mikrotik.com/client/ ). After having registered, you can try this test as many times you like. This test covers example test questions for MTCNA exam, there's nothing adequa...

Quared

Hello,

no double-posts please ...

Check my post here

greets

Quared

Hello,

you won't get them.
This is closed source kept and maintained by Mikrotik guys.

greets

Quared

Hello,

please provide more Information about your setup and config, especially a config dump

Open a terminal session in Winbox and issue command

/export hide-sensitive

post result

greets

Quared

Hello Ron,

perfect

Count me in

greets

Quared

Hello,

bumping threads without any more information ?

Did you manage to enable wireless logging as suggested by jarda ?
What's the log Output ?

Post it and post your configs ...

greets

Quared

Hello, currently we've got some RB911G (2HP, 5HP, also ac's/QRT) flawlessly running in projects for longer periods of time, most of them running 6.36, some already 6.37.1. These PCBs are running stable, no issues like those mentioned. Some hints: Try to stick with the most recent RouterOS version an...

Quared

Hello,

please elaborate a bit more about the intent of your question since there's (obviously) no direct association with RouterOS and TPMs

greets

Quared

Hello,

your topology images are not visible, please check.
Also some information/impression about walls and location of users in the building you mentioned might be relevant

greets

Quared

Hello,

more details are needed to understand your setup.

Please post at least results of your RouterOS-config

system logging print

and

system logging action print

greets

Quared

Hello,

suggested to go for some Steaks some days ago,
Sunday or Monday's fine as well, count me in

Happy to see you guys

greets

Quared

Hello, believe, you're aiming for User Manager, which is part of any zipped all_packages...... file per RouterOS version and hardware architecture (except ARM - currently). This package has to be installed (drag&drop on device) separately. For more details check this link Generally spoken, CAPsM...

Quared

Hello,

just contact trainers in your area ( UAE or Pakistan )

greets

Quared

Hello, from my experience and point of view: Your request cannot be answered based on this little information available. Planning on a map may be a first approach but NEVER covers natural obstacles (buildings, trees) and also no influences by other wireless systems nearby. The most appropriate way t...

Quared

Hello,

please refer to this this post

Thanks

Quared

Hello,

content of question and information presented is very poor

Did you already enable SNMP ?
Please post according config or screenshots

Thanks

Quared

Hello,

@Hursta:
Please proceed with Kristaps' hint to find the issue.

Generate supout.rif file from your system (RB + ME909s) and mail it to support@mikrotik.com

Greets

Quared

Hello,

got several ME909s-120 working flawlessly,

Huawei firmware 11.617.01.00.00
latest RouterOS release (6.36.3) and latest firmware per device

greets

Quared

Hello, just to make sure: 1. you're operating a miniPCIe-module with RB953 which is properly fixed :) (have seen some troublesome fixed modules as well) 2. you set the USB mode to mini PCIe 3. you rebooted the system then open a terminal window issuing /system routerboard settings set init-delay=4 r...

Quared

Julien,

did you already contact Philippe from Engitech S.A. in Geneva, he should be able to cover your needs, esp. language skills

http://www.mikrotik.com/consultants/europe/switzerland

If he isn't available or busy, just drop me a private message

greets

quared

Quared

check http://wiki.mikrotik.com/wiki/Manual:CAPs_Manager

Formal name for MikroTik's Wireless Controller

regards

Quared

Hi!

It is possible to have a (let's call it 'private') regular WiFi and another one as Hotspot.

In addition to a working wlan, you'll need a virtual AP.

Just drop a msg,, if you need more info.

greets

Search found 59 matches