was able to get the macbook connected by creating l2tp over ipsec vpn with help of this great walkthrough
http://www.nasa-security.net/mikrotik/m ... ith-ipsec/

thanks.

no error. vpn connects fine according to osx and on the router.
yes. i have tried configure ipv4 : using ppp and manual. both have the same result.

I have a pptp vpn setup and it works fine for windows 7 and 8 users. connection to vpn, pinging the network and connecting to network shares \\192.168.1.100\share. the vpn will connect for the os x users but they can not access any resources over the vpn, no ping, no afp or smb. doesn't see anything...

It has all been deleted at this point and moved on to another project. Sorry. We sent it to MikroTik also and they said the config was right and should have worked but for some reason it did not.

No we did the tagging and routing in the Cisco switch and passed the traffic to the MikroTik untagged and left the MikroTik with no VLAN config at all.

Thanks again for the help. It still would not work. I ended up setting up the routing in the VLANs on the Cisco switch and routed VLAN101 out to a different MikroTik router from there to achieve our goal.

Flags: D - dynamic, X - disabled, R - running, S - slave # NAME TYPE MTU L2MTU MAX-L2MTU 0 R ether1 ether 1500 1590 10226 1 RS ether2 ether 1500 1590 10226 2 S ether3 ether 1500 1590 10226 3 R ether4 ether 1500 1590 10226 4 R ether5 ether 1500 1590 10226 5 ether6 ether 1500 1590 10226 6 ether7 ether...

Thank you for the suggestions. This is exactly what we have configured but the guests connected on VLAN 101 dont receive an IP address from the DHCP server on the CCR Router at all. Any ideas why that might be?

We are new to VLAN on a MikroTik and could use some help. We have a unique routing situation for a CCR1036-12G-4S. we have searched all sorts of forums and are not really finding any useful information for our scenario. We have some Ruckus wireless access points installed that are brodcasting 2 diff...

We are new to VLAN on a MikroTik and could use some help. We have a unique routing situation for a CCR1036-12G-4S. we have searched all sorts of forums and are not really finding any useful information for our scenario. We have some Ruckus wireless access points installed that are brodcasting 2 diff...