Hi.
I have same problem with nexus 5x and rb2011, battery drain very fast on wifi no Deepsleep since 7.0, i on the 6.38 Rc15. On a TP-Link AP no Probs .

I have the same LTE Stick (E3276 )
Any News about 4G and Microtik?

Thanks

Hello,

i use this http://mum.mikrotik.com/presentations/US12/tomas.pdf Bandwidth-based load-balancing with failover - the easy way and its work great.

But i cant get OpenVPN work and i thinks its a problem with the Bandwidth-based load-balancing.
The Client cant connect.

Hello again,

with the Failoverscript from you SNTP and check for updates on the Routerboard dont work anymore. (No Internetconnection)

Thanks witch is the better way? /ip route add dst-address=8.8.8.8 gateway=10.0.0.138 scope=10 add dst-address=8.8.4.4 gateway=192.168.2.1 scope=10 /ip route add distance=1 gateway=8.8.8.8 routing-mark=ISP1_Route check-gateway=ping add distance=2 gateway=8.8.4.4 routing-mark=ISP1_Route check-gateway=...

Hello, i have setup a Bandwidth-based load-balancing . (http://mum.mikrotik.com/presentations/US12/tomas.pdf) It works. Now i will set up Failover http://wiki.mikrotik.com/wiki/Failover_Scripting but this not work only the Distance of Wan2 get higher and higher but the Wan2 ist ok. # ---------------...

Hello, i want to setup a LB like this howto http://tiktube.com/video/DofH3iFnjDJomGEoIDFqnrquKlEoLqHq= but all 5 seconds no traffic on WAN interface. WAN 1 and WAN 2 the same on the LAN no drop. No Firewall setup, only the config in der PDF. only difference my LAN is a bridge. Has anyone a idee? Tha...

Oh bad, someone has a Idee?

Hello,

i will do the same.
Have you get it to work?

Thanks

Thanks

Hello,

where can i find a list of all wired connected Clients ?

Like:
Ether 1 - 192.168.1.52
Ether 2 - 192.168.1.6
.
.
.

On Port 1-4 are Client with fix Ip configuration (no dhcp, no make static).

Thanks

I have the same problem: [admin@MikroTik] > interface ethernet print Flags: X - disabled, R - running, S - slave # NAME MTU MAC-ADDRESS ARP MASTER-PORT 0 R ether1 1500 D4:CA:6D:F8:49:82 enabled none 1 S ether2 1500 D4:CA:6D:F8:49:83 enabled ether1 2 S ether3 1500 D4:CA:6D:F8:49:84 enabled ether1 3 S...

Hi there, i just bought a 2011UAS-2HnD router.

I can´t find the wireless option.