I have opened a support ticket w/ Mikrotik and will post the results here for any future users who might have a similar issue.

Hi, Sorry in advance if this has already been covered, as I couldn't find it. I am trying to get a third Audience AP online and it seems to be having problems loading the default 'wps-sync-mode-script'. I have reset the device multiple times, upgraded the firmware to 7.12.1, downgraded it to a lower...

dpwl, Thanks for the prompt response and the concise explanation of the actual issue! When I read the functional description of station-pseudobridge my gut was telling me the same without the details. :D All the APs are Mikrotik (wAP AC or hAP AC). Can I infer that using AP-bridge via CAPsMAN will a...

Sorry in advance if this is covered elsewhere in another thread. My search attempts didn't find it. I am trying to use an RB951 to extend a wireless network to a location I can't run a wire for a local wired device. I am hoping to keep the wireless infrastructure (controlled by CAPsMAN) unchanged ru...

Create the folder you want on your desktop and drag it in to 'Files' via winbox.

+1 vote to add UM to ARM and MMIPS

can someone expain what this line exactly does? why we need it? what traffic accept?

add chain=prerouting dst-address-list=!LAN src-address-list=LAN

You don't, I don't think it actually does anything looking at it now. The new iteration of this config I am using doesn't have it.

Hi, Here is what I have running on my client's network RB2011 (6.35 - hasn't been rebooted in 193 days) that PCC load balances two high speed WAN connections, along with Queue Trees for all the local subnets 3x 951Ui-2HnDs and 1x wAP as APs (6.37.1) 1x 750UP to power the APs (6.37.1) 5 networks that...

After more research, I discovered I needed to use http://wiki.mikrotik.com/wiki/Manual:CAPsMAN#Manager_Forwarding_Mode . You'll want to enable 'client to client forwarding' as well, otherwise clients on the same AP won't be able to connect. Also, make sure to create a bridge on each AP, add ether1 a...

Hi, If this is covered in another post, sorry, I couldn't find it. I am using CAPsMANv2 to control 3 APs with 4 SSIDs/networks on different VLANs/bridges. One of the networks has a network printer connected wirelessly which can be pinged from the router, but not from some clients connected wirelessl...

Turns out it was the way I was creating the route for the cable modem. I needed to refer to it's upstream gateway, not the interface. Which I can do on the PPPoE interfaces. You can do it on the PPPoE interfaces because they're point to point interfaces, i.e. the gateway IP is implicit. Aaah! THAT ...

So ... I removed the entire config and then added it section by section back in from an export. Turns out it was the way I was creating the route for the cable modem. I needed to refer to it's upstream gateway, not the interface. Which I can do on the PPPoE interfaces. If I have any routes referring...

I am using mangle to mark packets for QoS and routing marks for load balancing. There are 4 different networks that use Queue Tree to prioritize traffic. Things worked fine when I used ECMP to load balance the WAN connections, but I had a lot of complaints about the inability to use websites and var...

I have an RB2011 with 3 WAN connections (2 DSL via PPPoE, 1 Cable via DHCP) In the router I can ping from the two PPPoE interfaces to google.com, but not the Cable interface. From the Cable interface I can ping the ISP's gateway and DHCP server, but nothing beyond that. The masquerade rules for each...

After some research and help (thx Amin!) it looks like this. (note to self: address lists are your friend) /ip firewall mangle add chain=prerouting dst-address-list=!LAN src-address-list=LAN add action=mark-connection chain=input in-interface=pppoe new-connection-mark=WAN1_mark add action=mark-conne...

Hi, If this has been covered already, sorry in advance. I am trying to configure a Dual WAN (DHCP, PPPoE) solution with PCC load balancing that is accessible by 3 local networks (untagged LAN and 2 VLANs) I have the wireless/LAN networks routing over either WAN okay, but am having problems getting t...