MikroTik

Vyrtu

Hi again guys, i have a little problem with this script, this is the final code: :if ([/ping address=8.8.8.8 count=4]=4) do={ /file set miconexion.rsc contents ([/file get miconexion.rsc contents] . "\n" . [/system clock get date] . "\_" . [/system clock get time] ."\_ "...

Vyrtu

Nice it's working now, i put the final script, if somebody needs it: :if ([/ping address=8.8.8.8 count=25]=25) do={ /file set miconexion.txt contents ([/file get miconexion.txt contents] . "\n" . [/system clock get date] . "\_" . [/system clock get time] ."\_ ". "C...

Vyrtu

You need to explicitly add to the contents, rather than replace it. Use the "/file" menu's "get" command to get the current contents. i.e. /file set miconexion.txt contents ([/file get miconexion.txt contents] . "\n" . [/system clock get date]) NICE! The script works, ...

Vyrtu

Hi, i have this script: :if ([/ping address=8.8.8.8 count=25]=25) do={ /file set miconexion.txt contents [/system clock get date] } else={/file set miconexion.txt contents [/system clock get date]} I need line break for each script run like that: nov/18/2013 nov/18/2013 nov/18/2013 nov/18/2013 And t...

Vyrtu

If a router is turned off, there's nothing you can really do about it. You can specify a maximum number of seconds to wait for the connection to be established, but if you have too many routers, you can still exhaust PHP's 30 seconds timeout. You can do that at the 6th argument at "new RouterO...

Vyrtu

The errors are due to your script trying to connect to the router despite the failed connection. The best way to deal with this is to encapsulate your whole per-router script into a "try...catch" section, not just the "new RouterOS\Client" part. For each router i copy and paste ...

Vyrtu

Maybe with a ping before the request, and if it works, print the request, if not, it alerts me.. The problem is, how i can ping the router before the request? pd: Can I ignore the router with otherwise more simple? pd2: I have this now: <?php try { $client = new RouterOS\Client($ip, 'vito', 'vito');...

Vyrtu

Hi again, i can connect 6 different routers mikrotik now..But i have a little problem. If i have 1 router turn off, the script doesnt work :S For each router i copy and paste this: <?php flush(); //Consulta al Primer cliente Mikrotik para sacar el listado ($client) //Imprime la informacion de Active...

Vyrtu

Like I said, you're never sending the request... same as with your other recent topic . So: if (isset($_POST['act'])) { foreach ($_POST['act'] as $act => $itemID) { if (in_array($act, array('remove'))) { $remove=new RouterOs\Request("/ppp/active/{$ac...

Vyrtu

in_array() checks against an array, not a string, so change if (in_array($act,'remove')) to if (in_array($act, array('remove'))) To debug errors like this more quickly and easily, you may want to enable error display. Open up your php.ini file, look for "display_errors", and change th...

Vyrtu

Well, you have the request here //Reiniciar PPP $remove=new RouterOs\Request("/ppp/active/remove"); $remove->setArgument('numbers', $itemID); but you're never sending it. Also, you'll notice that as it stands, you're ALWAYS preparing this request, as opposed to only when the reset butto...

Vyrtu

Hi again :) I tried print a name of my mikrotik router and it returns nothing :S This is the code: <?php use PEAR2\Net\RouterOS; // require_once 'pear2\src\PEAR2\Autoload.php'; require_once 'PEAR2_Net_RouterOS-1.0.0b4.phar'; $client = new RouterOS\Client('xx.xxx.xx.xxx', 'victor', 'xxxxx'); $cabecer...

Vyrtu

Other question, how can i sort by name the table? Im trying with ksort but doesnt work :S ksort() sorts by key, and the response collection has the reply's number as a key (first received has 0, second received has 1, etc.), not the name, and it's already sorted... so while ksort() could work (as i...

Vyrtu

You have forgotten the toArray() call at $ppp1 and $ppp2. For the sake of performance, you might want to move away your requests into a variable that you then pass to all clients. Also, if there's a potentially growing list of routers (i.e. Client objects), consider placing them in an array instead...

Vyrtu

Hi, im here again, and now im trying print again the active connections and ppp's, but now, from 2 routers.. Here is the code: <?php use PEAR2\Net\RouterOS; // require_once 'pear2\src\PEAR2\Autoload.php'; require_once 'PEAR2_Net_RouterOS-1.0.0b4.phar'; //Conexion a Mikrotik //IP MIKROTIK //Usuario /...

Vyrtu

Im trying combine the 2 arrays in one(ppps, and active connection) and print it, but it doesnt work..

Vyrtu

Its working, but now, i need print 2 mikrotik router in the same script. i add a new connection: $client = new RouterOS\Client('','admin','admin'); $client2 = new RouterOS\Client('xxx.xxx.xxx.xxx','admin','admin'); But now, i dont know how to continue the script..:S Other question, how can i sort by...

Vyrtu

The single quotes mean the string is passed literally, rather than variables being interpolated. In other words, '$ip' refers to a hostname called "$ip", which is obviously not a valid IP or domain name. Remove all apostrophes to pass the actual variable values, i.e. $client = new Router...

Vyrtu

hi guys, im here again :S Im trying create a form to connect a router mikrotik: <?php //ConectarAPI use PEAR2\Net\RouterOS; // require_once 'pear2\src\PEAR2\Autoload.php'; require_once 'PEAR2_Net_RouterOS-1.0.0b4.phar'; //Formulario echo "<table><form action='' method='POST'> <tr> <td><input ty...

Vyrtu

P.D: I run the script again and.." Fatal error: Maximum execution time of 30 seconds exceeded Fuuuuu.... OK... remove the "unset" line. Apparently, freeing memory takes more time than a loop over your full list. (Note to self...) I haven't the unset line.. I just paste your last code...

Vyrtu

Nice, its working, it takes about 20 seconds, but its ok. Now i need remove the active connections with the restart button. Something like /ppp/active/remove.. That's exactly the command - make such a request where you set the "numbers" argument to the ID of the active connection (the one...

Vyrtu

Nice, its working, it takes about 20 seconds, but its ok.

Now i need remove the active connections with the restart button.

Something like /ppp/active/remove..

Vyrtu

If i dont compare the 'name's, it should be more fast, right? How is the code?

Vyrtu

After 5-10 minutes, the script finished but we have another error xD

"Fatal error: Maximum execution time of 5 seconds exceeded in phar://C:/wamp/www/PEAR2_Net_RouterOS-1.0.0b4.phar/PEAR2_Net_RouterOS-1.0.0b4/src/PEAR2/Net/Transmitter/NetworkStream.php on line 120"

Vyrtu

Hmmm but, how i can increase the execution timeout? im using PEAR2_Net_RouterOS-1.0.0b4.phar

Vyrtu

The code print a bit of data (5 or 6 rows), but then i have this error:

"Fatal error: Maximum execution time of 30 seconds exceeded in phar://C:/wamp/www/PEAR2_Net_RouterOS-1.0.0b4.phar/PEAR2_Net_RouterOS-1.0.0b4/src/PEAR2/Net/RouterOS/Communicator.php on line 601"

Vyrtu

Hmmm.. I need 'service' from /interface/pppoe-server instead 'service' from /ppp/active and name (interface/ppoe-server)= name(ppp/active), and i use 'if' like this: $interfaces = $client->sendSync(new RouterOS\Request('/interface/pppoe-server/print')); $ppps = $client->sendSync(new RouterOS\Request...

Vyrtu

Hi guys, im here again, with a new code: <?php use PEAR2\Net\RouterOS; // require_once 'pear2\src\PEAR2\Autoload.php'; require_once 'PEAR2_Net_RouterOS-1.0.0b4.phar'; //IP MIKROTIK //Usuario //Password $client = new RouterOS\Client('xxx.xxx.xxx.xxx, 'admin', 'admin'); //Conexion a Mikrotik // Tabla ...

Vyrtu

Perfect, its working very well, thanks you so much again

Vyrtu

Working, but we still have 2 problems, when i refresh after add, it add a new same rule, and i cant add new rule without protocol and ports. In winbox we can..

Vyrtu

It adds the rule with 'accept' action, and when i refresh the page, it adds again the same rule..

Vyrtu

The script looks good, but when i try add a new rule, doesnt work and alerts me ("failure: no chain specified")

Vyrtu

Hmm.. doesnt work, i post the complete code: <?php use PEAR2\Net\RouterOS; // require_once 'pear2\src\PEAR2\Autoload.php'; require_once 'PEAR2_Net_RouterOS-1.0.0b4.phar'; $client = new RouterOS\Client('192.168.150.161', 'admin', 'admin'); if (isset($_POST['act'])) { foreach ($_POST['act'] as $act =>...

Vyrtu

I update the code, and its working, but i have another problem.
In radio buttons, when i choose src(chain srcnat), the action should be src-nat, and when i choose dst(chain dstnat), the action should be dst-nat
When i create a nat rule, it creates with action accept :S

Vyrtu

Hi guys, im scripting a new code to add nat rules on mikrotik, and i need some help :S This is the code: <?php //Listas desplegables echo "</br>"; //Peticion a la API $addRequest = $client->sendSync(new RouterOS\Request('/ip/firewall/nat/add')); echo "<table align='center' border=2 bo...

Vyrtu

It's working right now! Thanks for help

Vyrtu

That can't be right. You're breaking off the value attribute with the first apostrophe. But now i can remove the rules but dont update them.. EDIT: Yeah... Having apostrophes results in a DIFFERENT name. That's why you can't edit - the parameter name is again different. BTW, to remove, you don't ne...

Vyrtu

That's odd. I have Firefox too, and with that last change in place, it works as expected in both it and IE10. Although note that there are no "OK" or "error" messages, so you may be left with the impression that nothing happened when you click the Modificar button. I solved, the...

Vyrtu

I know, I changed to-addresses in ur first code, u had to-address too but its dont working.. Im using Firebug to see the code on the firefox and i have something wrong http://gyazo.com/20b4a734b8d73217ab46a46111426976 maybe something is wrong with the name.. :S and the button's name too: http://gyaz...

Vyrtu

The buttons still dont working..When i modify the src address or ports or something in the table and then i click on Modify, the values refresh and come back to old values :S And the delete button neither working.. Im using the updated code right now Im so glad with ur help, thanks..I was working ha...

Vyrtu

Thanks so much, i really need this code for my project..I changed some syntax errors but the rest its ok i have another problem, the buttons still dont working, i want in the input texts change my nat rules directly, but they still unchanged. i cant understand the action part of the code.. p.d Sorry...

Vyrtu

My problem is solved. I post the final script. <?php require_once('api_mt_include2.php'); ?> <?php //////////////////////////////////////////////////////////////////// // ESTE EJEMPLO SE DESCARGO DE www.tech-nico.com /////////////////// // Creado por: Nicolas Daitsch. Guatrache. La Pampa ///////////...

Vyrtu

Hi guys, i need a script to modify or delete one of the nat rules's list. I have 2 buttons for each nat rule (modify, delete). The script is something like that: <?php use PEAR2\Net\RouterOS; // require_once 'pear2\src\PEAR2\Autoload.php'; require_once 'PEAR2_Net_RouterOS-1.0.0b4.phar'; $client = ne...

Vyrtu

Thanks, but i still having problems. It's my full code: <?php require_once('routeros_api.class.php'); ?> <?php $ipRouteros="192.168.2.1"; // tu RouterOS. $Username="adminapi"; // usuario API $pass="adminapi"; // contraseña del usuario API $api_puerto=8728; // Puerto API...

Vyrtu

Hi, i'm newbie with API's Mikrotik right now, and I need some help :S I need know how to enable and disable ethernet ports with api and php.. I was testing with these codes, but i cant fix them..Im so bad :( if ($API->connect($ipRouteros , $username , $pass, $api_puerto)) { { $API->write('/interface...

Search found 45 matches