You can us a burst limit and set the about of time it has to run at the burst limit speed. A burst limit is only triggered when the clients are using the max bandwidth limit so if the client doesn't use what is already set in the simple queues as the max bandwidth it will never go over what is set f...

I thought it might be important to point out that PPTP connection may work though some ISP's but not others. I have one set up on our network in Burnsville, MS and from my office in Corinth, MS I can't connect to it. It does the same as you describe yours would do. Yet from my son's home in Iuka, MS...

I'm sorry moazdabsheh I didn't have the right code earlier post. Here is code I just used on my RB1100AHx2 and it works perfectly. I have two 30M connections and I get the full 60M on speedtest.net with this code. PCC Rewritten for per packet load balance with the use of nth. / ip address add addres...

I think what you want is to have your traffic to combine both of your internet connections at least that is what I wanted and needed. I have to connections to the internet both 30M download and 3M upload and I wanted to run a speed test that showed a 60M download and 6M upload but what I got was 30M...

Try adding Nth 2/1 and Nth 2/2 to these two mangle rules you have. add chain=prerouting dst-address-type=!local in-interface=local per-connection-classifier=both-addresses-and-ports:2/0 Nth 2/1 action=mark-connection new-connection-mark=WAN1_conn passthrough=yes add chain=prerouting dst-address-typ...

Try adding Nth 2/1 and Nth 2/2 to these two mangle rules you have. add chain=prerouting dst-address-type=!local in-interface=local per-connection-classifier=both-addresses-and-ports:2/0 Nth 2/1 action=mark-connection new-connection-mark=WAN1_conn passthrough=yes add chain=prerouting dst-address-type...