It is not for load balancing. I am trying to set up a hardware failover with VRRP. I have two leased lines with fixed IPs in /29 subnet. Is it possible to have two different fixed WAN IPs in two different subnets? This basic example doesn't work. Mikrotik doesn't allow me to create two 192.168.1.1/2...

So the Virtual IP (Vrrp Ip) is the same as the Gateway IP. But what about if I have two leased lines or two static public IPs, for example, 195.199.x.x and 87.159.x.x, how would I go about setting up the VRRP?

Hi barkas,

What do you mean by the primary router would have the .2, backup .3, and vrrp ip would have the .1? Shouldn't the Primary and Backup be in a /32 subnet?

Thanks.

Hi, I need some help getting my VRRP setup working. 1. When both are powered up and initialized, both Interfaces in Winbox show "RM" (Running Master). Shouldn't it be one Master only? 2. Clients might connect through vrrp-backup unit instead of vrrp-master. Shouldn't it be always Master fi...

There is only one "/tool fetch" job in the scripts. I have tried to run the script manually when it failed by clicking on "Run Script" button but it did not help. The only way to recover it is to reboot or power cycle the unit.

Does anyone have a solution for this? I am having the same problem, it runs sometimes a few hundreds counts and sometimes it runs up to 20000 counts before /tool fetch fails to work.

Routerboard Firmware version: 3.18
Package version: 6.19

I've tried to upgrade both version to no avail.

Thanks.

Hi Sergejs, why do I need to configure RADIUS server for PPTP Server?

Hi, if I configure a CCR-1036 with 16GB RAM as a PPTP Server, what is the maximum concurrent PPTP client connections does it support? Will it support /16 sub range?

Hi Uldis, I would like to send the GPS data captured to traccar gps server. How do I make use of the GPS package and send the following data to the server? Login (sent once TCP connection is establshed): $PGID,123456789012345*0F\r\n (where 123456789012345 - IMEI or other unique id) Simple location ...

Hi Uldis, I would like to send the GPS data captured to traccar gps server. How do I make use of the GPS package and send the following data to the server? Login (sent once TCP connection is establshed): $PGID,123456789012345*0F\r\n (where 123456789012345 - IMEI or other unique id) Simple location r...

Code: Select all

[admin@MikroTik] /system gps> set init-string=AT^WPDGP
[admin@MikroTik] /system gps> pr
          enabled: no
             port: usb2
          channel: 0
      init-string: AT^WPDGP
  set-system-time: yes

Thanks.

Hi Uldis, how and where do I add the gps-init=AT^WPDGP command?

Thanks Uldis. So it is only available from 6.25 onwards.

Hi, what routeros version and Mikrotik support come with the /system gps command? I am using RB912UAG-2HPnD-OUT and version 6.20 and routerboard 3.17 but I could not find the /system gps. I am also using Huawei ME909u-521 Mini-PCIe LTE module. I would like the Mikrotik + Huawei LTE to send the GPS N...

Hi rextended, Do you mean I need to configure port 8291 winbox in Firewall Mangle rule as well instead of Firewall Filter Input rule for remote management? How do I go about doing it? There's no Public IP addresses in this case because all 3 load balance connections are 3G/4G. Hence, PPTP is configu...

Hi Experts, I have problem accessing a PCC load balancing routerboard through winbox or webfig remotely. The winbox always stays at "Downloading Plugin...". I have 8291 and 80 configured in the Input firewall. What is the proper way of configuring remote management in load balancing? By th...

Hi rextended, RouterOS version = 6.10 RouterBoard used = RB951Ui RouterBoard Firmware = 3.12 I generated the certificate from my ubuntu machine with openssl x509. I used the System/Certificates to import the file. Do I need to set up the firewall for local access, i.e., 192.168.88.1? Thanks. Vincent

How do I configure Webfig to use https? I turned on the ssl-http in IP/Services and installed a certificate but I still get SSL error when I try to access webfig through https://192.168.88.1.

Thanks.

Thanks Skot! The code works very well.

Hi All, I use /tool fetch to get a file from a remote server and I am able to read the contents by doing ":global text [/file get filename contents]". The file consists of the following info, for example. wlan-personal.ssid Personal wlan-personal.channel 10 wlan-personal.mac 00:01:02:03:04...

You'll have to insert an if statement then to account due the variability.

Sent from my SCH-I545 using Tapatalk

Thanks efaden!

Does RouterOS support n2n vpn? If so, how do I go about configuring it?

Solved! Thanks all.

A duplicate post in http://forum.mikrotik.com/viewtopic.php?f=9&t=80114

You can do something like this. I'm assuming your interfaces are ether1, wlan1, and wlan2. :global e1tx [/interface get ether1 tx-byte] :global e1rx [/interface get ether1 rx-byte] :global w1tx [/interface get wlan1 tx-byte] :global w1rx [/interface get wlan1 rx-byte] :global w2tx [/interface get w...

If I issue [admin@Mikrotik] > /interface print stats it will return Flags: D - dynamic, X - disabled, R - running, S - slave # NA RX-BYTE TX-BYTE RX-PACKET TX-PACKET RX-DROP TX-DROP 0 R et 23 366 865 152 283 106 193 502 182 514 0 0 1 wl 22 220 63 608 189 141 0 0 2 wl 199 155 2 279 514 1 883 2 168 0 ...

maybe :pick could be useful. I can try to write something if I get a chance later... but the basic idea is use :pick to break it up into its pieces and then convert them to numbers and multiply it all together.... :local myString "1d:12:00:00" :local days [:pick $myString (0 [:find $myStr...

Thanks for the example and help.

Hi All,

How do I convert the uptime output from "1d21:20:49" to seconds?

Is there a command in RouterOS for processing delimiters? For example, these commands "cut -d:" and "awk -F':'" are used in Linux Shell script.

Thanks.

Hi,

How do I convert the uptime output from 1d12:28:40 to seconds?

Is there a command in RouterOS for processing delimiters, i.e., "cut -d:" and "awk -F':'" in shell script?

Thanks.