Yeah it should work fine, as long as the LigoWave unit is set to the same center frequency as the Mikrotik. The last I checked the Mikrotik uses the default center frequency for all channels, so for instance channel 149 half would use 5.745GHz as the center frequency.

I would like to see your implementation of "50 users on one gateway, and 50 users on another gateway." I setup a load balancing scheme with this. First I used nth to balance and assign users to 3 different src IP lists. After that I used mangle rules with src IP lists to load balance betwe...

I never figured this out... it seems that mangle was missing packets. What I ended up doing was creating an eoip tunnel on each WAN interface to a 100mbit connection at another location and bonding the eoip tunnels together and creating a default route out of the bond. Now the traffic on all links i...

i had a similar issue:

http://forum.mikrotik.com/viewtopic.php?f=2&t=20334

i never ended up getting it to load balance evenly...

It seems like I read about this once (trying to do it myself :D )... It seems you can do this with other PPtP servers that use DHCP to assign IPs to users (such as M$ RRAS) because you can set DHCP options to advertise routes, but with Mikrotik I read that you can't do it this way because it doesn't...

of course it will be like this, it all depends on how much traffic is coming from one group, and how much from the other. users are not drones that transmit at certain speeds all the time, each of them has different ways of using the internet. also it depends on how you set up your load balancing, ...

No, I don't use web-proxy.
And I only connection-mark the traffic from users' LAN, so I need the default route for non marked traffic (traffic from router itself and management hardware not on users' subnet).

-Matt

Maybe this will help:
http://wiki.mikrotik.com/wiki/Bruteforc ... %26_SSH%29
?
-Matt

Hello All, I have a few locations that are using Mikrotik routers. At these locations there are 50-100 users connecting through the system, so to accommodate the bandwidth needs of these people we have brought in 3 cable modems that dump directly into the Mikrotik into different ethernet ports. We t...