I have been asked for Japanese Technical Conformity for our mikrotik-based products, and came across this old thread.
Have there been any updates in the last decade?

Thanks leonix, I hadn't understood the notation.

Hi Leo, Why do you say that more than HT40-7 is not possible? My understanding is that MCS-8 uses the same modulation scheme as MCS-0, but with two spatial streams. I tried playing with the MCS settings as you suggest. I'm not sure how to modify it as per your image: - the web interface won't let me...

I also looked at the "Rate/LastMeasured" part of the registration tab -- it only lists up to HT40-7. Is it always like this? Am I never getting MCS8+?

Thanks JanezFord. My Tx/Rx signal strength for the laptop (as per the registration page) is -66dBm. I tried turning down the tx power (by setting the antenna gain to 13dBi [when I actually have stubby omni antennas (5dBi?)]), no change. Also I'm using the correct encryption. I double-checked the CCQ...

leonix,

Do you think that reducing MCS rates will increase throughput over my 5m link?
(Also: my CCQ is near 100%).

I'm running v6.10.

leonix: I'm not using nv2, just straight 802.11n -- so I don't think any of the TDMA stuff applies to my situation. n21roadie: my access-point and laptop are separated by maybe 5m with line of site -- so I don't think there are any fresnel zone issues (and if there were, they would apply equally to ...

(I should also mention that the problem isn't CPU-limited, CPUs are all lightly-loaded)

I did some more digging on this. Quick summary: - by setting distance to 'indoors' I can improve throughput a bit but still not excellent - throughput is heavily asymmetric (downlink faster than uplink) Detail: I notice that I'm not the only one, there are similar reports: http://forum.mikrotik.com/...

Hi, I'm evaluating the following setup: - RB912 carrying a Ubiquiti SR71e card in the miniPCIe slot - (the RB912's on-board radio is disabled) - 2 low-gain omni antennas for the SR71e - a laptop a few metres away - a desktop computer directly-connected to the RB912's ethernet port I'm measuring thro...

Hi, I'm testing a setup with an RB912 with a Ubiquiti SR71e Mini-PCI card. (I'm using the SR71e in my tests, the RB912's on-board radio is disabled). I have 2 low-gain omni antennas, and a laptop several metres away. I don't seem to be able to get TCP throughput (measured by scp-ing a big file) grea...

Hi Sergey,

Can you post what support wrote? I'm seeing deauth due to inactivity (not as frequent as you), I'm curious to know the reply.