which Hetzner host giving better performance for router OS (intel or ARM):
CX22, 2 core intel Xeon gold, 4GB RAM and 40GB SSD
or
CAX11, 2 core Arm64 ampere altra, 4GB RAM and 40GB SSD
Lets say that you have the local network 192.168.10.0/24 your mikrotik router 192.168.10.1 and your internet connection is PPPOE with dynamic IP address you have DDNS name as (xyz.dyndns.org) or any other name. you have NVR (192.168.10.100) on TCP port 9000 in normal configuration you will have the ...
I didnt nat it because i use VPN , do i need to nat ??? No, you do not need NAT for your VPN connection. Depending on the configuration, you might need a NAT bypass rule placed at the top of all other NAT rules. http://wiki.mikrotik.com/wiki/Manual:IP/IPsec#NAT_Bypass thank you Mr THG you are geniu...
this is the routers configrations Site A.png Site B.png this is the configration befor then i add this NAT Bypass rule site A /ip firewall nat add chain=srcnat action=accept place-before=0 \ src-address=192.168.50.0/24 dst-address=192.168.40.0/24 site B /ip firewall nat add chain=srcnat action=accep...
I have Two Office (A and B ) In each Office there is RB-750GL Router , both Office connected with L2TP VPN , in Each Office I have IP PBX connected to each other with SIP protocol. Everything is working great , but at the end of the day office ( A ) disconnect the power from all the equipment and de...
DynDNS Script I use the following script with DynDNS , its working great with free account and with Dlinkddns.com but not working fine with DynDNS pro or any DynDNS paid serves Anybody have good script ? :local ddnsuser "username" :local ddnspass "password" :local theinterface &q...
I have Two sites in deferent Countries , Site A have FTTH connection to the internet using PPPOE connection with RB-951G-2HnD and Using DynDNS service for dynamic DNS service. RB in site A acting like VPN server. Site B have ADSL Connection so I use non MikroTik router (D-Link ADSL Router) for the i...