Same problem here, i updated from 6.49 to 7.12.1 X86 platform. Config has three DHCP servers on separate bridges. One of them is the Hotspot DHCP server, this works fine The second one is a custom DHCP server for local devices works fine as well. The third is a large DHCP server with only static lea...

Hi, We ran into a weird situation. We are installing a wireless network of 9 Accespoints managed by capsman. AP110 to AP118 The AP's are RB912uag-2hpnd boards with R11e- 5AcHD external radio cards. Now it seems the R11e radios have no / duplicate mac addresses. AP114 and AP115 both have the mac addr...

Hi, At my lab i am trying to build a lab vlan on 2 switches for testen and config of mikrotik units. Lab-1 switch is a CRS112-8P-4S Lab-2 switch is a CRS-328-24P On my desk i have the LAB-1 switch that is connected to our LAN network by 2 ethernet cables, and i can disconnect the LAB VLAN when neede...

then i disabled port 2000 form tools Btest server and i disabled the socks and i exported backup and read all code, nothing bad i don't know if will hacked after that Hi ahmedalmi , If you want to make your routers secure, make sure you setup your firewall to only allow acces from known IP adresses...

then i disabled port 2000 form tools Btest server and i disabled the socks and i exported backup and read all code, nothing bad i don't know if will hacked after that Hi ahmedalmi , If you want to make your routers secure, make sure you setup your firewall to only allow acces from known IP adresses...

Hi, Im an running a CRS328 with 20 SFP modules. on ROS 6.42,.6 I am trying to apply port isolation, without losing hW-offload capabilities (so no horizon). The Mikrotik documentation https://wiki.mikrotik.com/wiki/Manual:CRS3xx_series_switches#Port_isolation Is sending me to the switch chip manual f...

The first topic is actually about something else, this is why I leave this topic open. But the posts below seem to ignore the original questions, so I must repeat myself: Issue was fixed in March already. https://blog.mikrotik.com 1. Upgrade to 6.42.3 2. Change password after upgrade (not before) 3...

HI, Normis, before you close this topic, im not interested in how they got in, but what they want. As seen in topic https://forum.mikrotik.com/viewtopic.php?f=9&t=137217 the past few days a vast number of non-up-to-date Mikrotik devices has been compromised. (not blaming Mikrotik, we should have...

Hi Leoservices,

I updated to 6.42.1 and still no change in the UPS information shown.

I'll send a support request to Mikrotik.

HI, I have several x86 and Mikrotik systems running on ROS 6.39.3 with a APC Smart-UPS C 1000 FW:UPS 10.0 / ID=1005 The UPS is connected by USB They show the following info: - Model - Serial Number - Manufacture date - Nominal Battery Voltage - Run time left -Battery Change - Line Voltage - Status: ...

HI Greg, Running the Mikrotik and Linux DHCP as VM has crossed my mind. However we have never done this and don't want to compromise the stability of our current systems. These are production environments. As i stated in my first post, we can always find a workaround but the ability to do it all fro...

Hi Greg, Yes we are using the Mikrotik as DHCP and TFTP server. We are running it on a x86 platform with plenty of processing power and storage space. We like to keep our setup fairly compact. From a management and financial point o view its also more efficient to run all the processes on a single s...

Hi, We do a lot of Docsis provisioning with our Mikrotik Routers. These are large networks of 200+ modems and every modem has a static DHCP so we can monitor each individual device. The provisioning is done via the docsis bootfile that tells the modems what its settings are. The bootfile has to be s...

I have the same problem.
We have numerous systems running ROS5 and its very frustrating to use two different versions of winbox.
Will mikrotik fix this?

Hi, We have a a firewall setting to protect our routers from ssh, pptp, and web attacks. It checks if an ip is on a whitelist, and if its not when it does more then 2 failed login attempts within one minute, the ip is added to a blacklist and dropped. However, we have routers that function as pptp s...

Thnx for all your replies. We played around a bit with a few suggestions but ended up with Zabbix. Its a pain to get the hang of (especially if your not a linux users) but once you get confident it offers loads of oppertunities. Now we are running two full blown zabbix servers, with a dozen proxies,...

Hi, I am setting up my routerboard as TFTP server for provisioning a DOCSIS 3.0 system. There will be several modems that are rolled out and get their DHCP and and TFTP info from the RB. Among these modems there are 3 different configurations, each with their own boot file containing the config. Whe...

Hi, Since the Dude has been comatose for the last three years and Mikrotik doesn't really give any evident plans for reviving it, I think it really is time to move on. However, what is there to move on to? I know there are plenty of network monitoring software package available, but which one to cho...