On this CHR router, there are only two interfaces connected from the HV. Their "native" mac addresses start with "00:15:5D". There are no other interfaces (bridge etc). Where the "E4:11:5B" addresses come from is unknown. There is no mention of these macs in the configu...

Has no one face with this problem?

Source: Windows Server 2016 standard, Hyper-V Chr 6.48.6 Two interface: ethernet and bridge with it. Mac address on interface and bridge (admin-mac) the same from Hyper-V virtual machine (00:15:xx:xx:xx:xx) In neighbor list in other MT i can see chr with two mac addresses: mac from chr (00:15:xx:xx:...

How to increase script execution timeout? When creating a certificate from a script, an error appears "action timed out - try again, if error continues contact MikroTik support and a supout file (13)" In this case, the processor is loaded for some time and a certificate is created. I have ...

if 2 pc works but only one is not with same settings... 1. anycase try to make src-nat add action=dst-nat chain=dstnat dst-port=4001 in-interface=WAN protocol=tcp to-addresses=192.168.2.205 to-ports=3389 add action=src-nat chain=srcnat dst-address=192.168.2.205 dst-port=3389 protocol=tcp to-addresse...

1. windows firewall can restrict to access while you are from different net https://technet.microsoft.com/en-us/library/dd421713(v=ws.10).aspx Block edge traversal (default) Prevent applications from receiving unsolicited traffic from the Internet through a NAT edge device. 1b don't shutdown firewal...

1. check your pc's firewall again, check gateway on pc
2. make src-nat

add action=src-nat chain=srcnat dst-address=192.168.2.205 dst-port=3389 protocol=tcp to-addresses=192.168.2.X

Please add "comment" to all entries created manually (or can be created manually)
To everywere. For example vpn server, switch, ospf.

We can find it by comment from script
We understand some tricky settings
Team work is getting easier

Will we be able to change the distance?

Server push me some route. A can't change ovpn server. After update to 6.40 ovpn get default route to vpn tunnel. how can i ignore ovpn default gateway? OR how can i set different distance to pushed routers? ps i fix this behavior by script on interface up (/ip route remove [gateway=ovpn-out dst-add...

I use some script to change main gateweay. :local PingStatus \ (([/ping $pingTo1 interface=$InterfaceName size=28 interval=0.5 count=$pingCount routing-table=$InterfaceName] + \ [/ping $pingTo2 interface=$InterfaceName size=28 interval=0.5 count=$pingCount routing-table=$InterfaceName] ) / ($pingCou...

You are right. Our engineer set wrong device. In general, there should be RB951Ui-2HnD
I saw a problem when trying to apply the configuration from the RB951Ui-2HnD to RB951Gi-2HnD

Thanks for the answer.

Recently, I discovered that there are only wlan-led and user-led in /system leds. Frimware update 6.35.2->6.35.4->6.36 did not change anything.  > system leds print Flags: X - disabled, * - default   #    TYPE                     INTERFACE                   LEDS                    0  * wireless-stat...