15k ARP entries with 70 users????? Read this: https://en.wikipedia.org/wiki/ARP_spoofing I investigated the MAC Addresses that is holding up the entries, it's connect to the ISP Routers. Other then that i can't find any other issues with this other then the ARP Table been too big. maybe there's som...

Hi Mikrotik Community! I'm running a CCR1016-12G for a property that requires WiFi for the whole building, It's filled with Grooves A-2Hn :D It's configured with 5 WAN LINES with 3 Hotspot Server for separate levels in the building . All seems well when combine of active users is less then 50, But w...

It works. Your router always need IP and routes configured... You mean the Mikrotik Wiki Example Works? Why would the DHCP client default route need to be enabled? when i have this? / ip route add dst-address=0.0.0.0/0 gateway=10.111.0.1 routing-mark=to_ISP1 check-gateway=ping add dst-address=0.0.0...

Kind of - the example given for 'load sharing' is basically what I said, have multiple gateway VRRP IP's and have each active master on different router. It is not a single gateway IP doing proper load sharing (i.e. this connection goes to R1 next connection goes to R2 etc). Thanks man! I getting c...

http://wiki.mikrotik.com/wiki/Advanced_Routing_Failover_without_Scripting This is fairly interesting... playing with the route distance.... I'll try it if PCC method really really doesn't work... I'm trying to do a Load-Balance using this two WAN lines, or PCC isn't design for such usage? But just ...

I'm trying to load-balance two WAN Lines, Try the MikroTik Wiki no luck... Tried Youtube... also no luck My Configurations /ip hotspot user profile set [ find default=yes ] idle-timeout=none keepalive-timeout=2m \ mac-cookie-timeout=3d /ip pool add name=dhcp_pool1 ranges=192.168.3.2-192.168.3.254 /i...

That can only work if the VRRP implementation supports load-sharing. I don't know if Mikrotiks implementation supports that. Thanks onno! while digging on the web and with much reading found out that Mikortik does support Load-Sharing on VRRP, Thanks for raising this awareness, I wasn't too sure my...

The SSID is just a part of a management frame that you send over the air. There is no control over who gets it.
You could lower your tx power. That will prevent some device which is far away to pick up this frame, but that is it.

Thanks for your clarification, I couldn't find much either.

I have 6 WAN LANs I'm thinking of Using the PCC with VRRP Router 1 - PCC with 3 WAN Lines , Active + Passive Router 2 - PCC with 3 WAN Lines , Active + Passive so both will work together? Any advice if this combination is bad? I''m looking for maximum speed and efficiency to squeeze the WAN lines i ...

Hi,

I'm wondering if it's possible to filter people who has very weak signal strength? I understand there's a away to do it like this under AP Access Rule -60..-50

but I'm looking for it to not to broadcast it's SSID to those people who has very weak Signals? Is this possible?

Hi, I happen to be facing the global variable problem too, your script, does it require some pre-requisite? like creating those files first? and are the firewalls needed for the script to work? this example in the WIKI doesn't work, I mean it updates well :) but it's not checking if the IP has chang...