Hello. i want Netbios(TCP 137 / 139) Block in CRS226 all Port (Switch Mode - ether1 is none set,and All other ports is set ether1 Master) .. But, i can not find any CRS Series Switch ACL Rule Examples in MikroTik Wiki.. it is too hard..and Error (matchers can be used only for ip or ipv6 mac-protocol...

Thanks for reply i try export command and try /tool user-manager database it is same problem. Image Capture URL : https://www.dropbox.com/s/iwgjw88ydvvj03p/exporting%20error%283%29.png?dl=0 in x86 base Terminal, exporting error. Anyone same problem like this? for me command /tool user-manager databa...

in x86 base Terminal, exporting error.
Anyone same problem like this?

Warning! I just upgrade RB2011UAS-2HnD to 6.21.1 from v6.19 and my router CPU used 100%. and I turn off all ether Port(ether3 Port is Console) but, Nothing had changed. I sent a rif file to the mikrotik support email and I waiting for a reply. Please do sufficient test, before the release. Same iss...

Warning!

I just upgrade RB2011UAS-2HnD to 6.21.1 from v6.19 and my router CPU used 100%.
and I turn off all ether Port(ether3 Port is Console) but, Nothing had changed.

I sent a rif file to the mikrotik support email and I waiting for a reply.
Please do sufficient test, before the release.

Received a response from MikroTik Support.

[Hello,

Correct information is 64MB. We will fix information on block diagram.]

Hi.

RouterBoard site Brochure say:
Memory 64MB

but, Block Diagram say:
RAM 128MB

What is right..?

Have a good day.

Hi.

RouterBoard site Brochure say:
Memory 64MB

but, Block Diagram say:
RAM 128MB

What is right..?

Have a good day.

I have a same Problem in japan....
Why is each time updated a some problem....???
I try routerboot update (3.18) but, same problem...

Hi I want to IPsec tunneling between the two Router (MikroTik RB2011(Client) <-> SECUI MF2 100(Server) Note. SECUI UTM devices are commonly used in financial institutions in Korea equipment. But, i have a some problem MikroTik Log say, [Zombie ph2 found, expiring it] What is the meaning of that log?...

64MB is correct. I will make sure the diagram is updated.

Thanks for fast reply...!
Have a good day.

Hi,
the RouterBORAD product site(http://routerboard.com/CRS226-24G-2SplusIN) specification table say:
Size of RAM is [64 MB]..
But, the block diagram is a [128MB] in RAM...

What is right..?

I found solution!! first, upload a some font in Dude and go to the Setting-> map->Device Appearance and then Change the Font...! Here is resolved capture. Have a Good Luck...! PS. Also change the font in another tab makes completely hi there thanks for your reply & the information i can see you ...

Hi
Many vendors (such as Cisco) support console auto logout.
but MikroTik is can't find any information about console auto logout..

it is possible console auto logout settings(or script)?

Hello nice meet you. i make for Korean language file about 30%... you must download base language files and then Convert to UTF-8 Link : http://download.mikrotik.com/dude/4.0beta3/strings-4.0beta3.txt and I upload a Korean Dude capture.. I have a same problem And I want you to also support Japanese ...

I try Netinstall
But Same thing...

Hello.

That CCR1036-12G-4S Router is our company Device..
and i see the pop-up, i just turn off..

In this Situation what can i do...?
I need help..

My company already CCR1009-8G-1S-1S+ have one ready for test
I think start testing to next week..
I hope a good test

Hi,
I want a check the a block diagram for CCR1009 series
where can i find it..?

and I just check the Routerboard.com
but I can't find it..

Thanks for reply and good info to me ^^ there is product like this: http://routerboard.com/RBPOE-CON-HP that takes anything high voltage throw at it at converts to usable 24V for RouterBOARD. (100MBps ethernet) And overvoltage protection will save your router, so it is just "not working" d...

rb800 has 802.3at type1 support. for full configuration of the router af will not be enough. That mean is if i plug in a Cisco AIR-PWRINJ3 Power injector in Groove or metal is not running device or damage? (AIR-PWRINJ3 -> Groove or Metal => not running?) if that Solution is not runnig, please let m...

Hi
I go to the routerboard.com
But, Wireless systems(Groove and Metal Series / BaseBox2 / OmniTIK U-5HnD)is not 802.3af support info...
So, Can i get some info to me?
Thanks.

Thanks a lot After NTP Packages install for CRS model, Name is same in RB2011 meun Hi! This is because you have different packages installed On RB2011 you have a separate NTP package installed that override the SNTP package included in the default package. You can install the default package and as ...

Hi, I use some Mikrotik Device the RB2011UAS-2HnD Device same the Winbox menu command(System-ntp client) and terminal But, CRS125-24G-1S is Different Show the Winbox : System->SNTP Client Show the terminal : /system ntp client Why is different? I think CRS Device should be the same meun name the RB2...

It's just an DDoS attack. The attacker sends DNS Request, that are resolved by your router. This results in big traffic for the target Machine, so the machine that is SOA of the DNS target (hundreds of this open resolvers get used for this). Regards, redflag237 Sir any powerful solution for this be...