Hi all! I can`t configure vlans on CRS with ROS 6.12. I try to use ROS 6.13rc14, tagged vlans routed by switch correct, tag/untag not correct. I configure tag/untag by CPU (like on RB2011 or other routers), it works for me. Tagged vlans routing: /interface ethernet switch egress-vlan-tag add tagged-...

Support in these cases gives the standard answer: "this will be fixed in the future". I need a working devices and not those answers or ongoing experiments.
Thanks, I'll try the beta.

Strange bug on CCR1036-12G-4S with ROS 6.12: After 8 new vlan added, some vlan disappeared after a short time. IPv4 addresses and other features on these vlan show as "unknown" interface. I try to add them again but getting error "this interface already exist". Anyone else got si...

As it turned out, I was too early to celebrate. This boxes sometime will work?
Any configuration changes (like change vlan ports) may cause the system becomes unbootable after reboot. And only reset to factory settings cause any effect.

Great! Tagged VLANs forwarding is working in ROS 6.12. I am immensely happy!

I read new examples. Is there a way to route tagged VLANs without using CPU? CPU usage does not have sense, since the processor is unlikely to be able to handle even 1 Gbps of traffic. Something like this: http://s1.ipicture.ru/uploads/20140416/V7XU6c2E.jpg http://s1.ipicture.ru/uploads/20140416/iSH...

What's new in 6.11 (2014-Mar-20 09:16): *) ipsec - fix aes-cbc hardware acceleration on CCR with key sizes 192 and 256; *) wireless - add auto frequency feature; *) ovpn - fixed TLS renegotiation; *) ovpn - make bridge mode work with big packets (do not leave extraneous padding); *) ovpn - fixed re...

How long to wait functional firmware? Now CRS can operate as a unmanaged switch only, that is completely useless.

I received a message from support: " In RouterOS v6.10 tagged VLAN forwarding is already working according to switch chip host table (forwarding table) when ports are switched using master-port. There is no connection between different VLANs as it should be. But there are some issues with VLAN ...

Contact support directly and have them show you how to configure them. Then come tell us.

Message to support sent via email. Waiting.

I already addressed in a support over CRS manual, not received a reply quickly, within 5 or 6 days.

Dear Mikrotik! The time is going, but I have no answer for my question. My boss is very dissatisfied and say to me: "You must find alternative for all Mikrotik devices, because these devices have some bugs and dont have proper documentation". This is several hundreds devices (CCR, SXT, CRS...

I planned to use CRS as ordinary L2 managed switches. VLAN-s must be routed in group of marked ports without any changes (tag, untag, translation, mirroring, etc.). And block to any other ports. Very simple variant.
How to do this?

Anyone have any ideas, how to route tagged vlans from one port to another?

Thanx. In examples I need to see how configure port-based tagged vlans. For example: tagged vlan 200, 300, 400 in port1. tagged vlan 200 out port 2 only tagged vlan 300 out port 3 only tagged vlan 400 out port 4 only Etc. I tested on CRS RouterOS 6.5 (factory installed) and 6.9 (latest at this time)...

I need manual for CRS too. Is it ready?
I send this question to support@mikrotik.com, but no reply.

I need manual for CRS too. Is it ready?
I send this question to support@mikrotik.com, but no reply.