I had to give all our customers with ps4's their own public ip because psn is blacklisting ips for no apparent reason

dont see no resason why PSN would blocklist IPs?
Maybe bad routing to PSN servers?

Same issue?
http://forum.mikrotik.com/viewtopic.php?f=2&t=116674

then I realised that the Virgin Media CPE was filtering PPP traffic, as PPP pass-through was disabled in it's "firewall" After disabling that filter the PPTP connection works fine over Virgin Media as well. what Virgin Media default hub was filtering the PPP traffic? Hub 3.0 by any chance...

10.10.10.10 is a private network address so i guess it wont work on the WAN side?

https://www.opendns.com
208.67.222.222
208.67.220.220

google dns https://developers.google.com/speed/public-dns/
8.8.4.4.
8.8.8.8

1st), setup a DHCP lease for the PS4 example 192.168.88.251 2nd, Delete the old NAT rules and copy and paste theses NAT rules in terminal (Works fine on v6.38.1) /ip firewall nat add chain=dstnat action=dst-nat to-addresses=192.168.88.251 protocol=tcp in-interface=ether1 dst-port=3478-3480,3659,1000...

If you click "Quick Set in Winbox", At the top dos any of the IP addresses look like, 10 or 172 or 192.168? If yes you have double NATed, You would need to setup a Public IP or setup a DMZ on the main router to your mikrotik device. /ip firewall nat add chain=dstnat action=dst-nat to-addre...

Are you running this on a RouterBroad or an x86 (PC)

Don't mean to be rude but why would you need something like a core i3 for routeros? When i had my dell optiplex mini tower single core 1.66ghz with a 4 port intel lan card and used the on broad lan for the WAN gateway, From when i can remember maxing out my 152mb dl it was hitting 41% cpu with the d...

Simple queue not working v6.33.1, Could this be an RB750 r2 mipsbe firmware issue? http://forum.mikrotik.com/viewtopic.php?f=3&t=102410

I am using a one simple queue list where i have restricted my sisters laptop via the DHCP static IP for target address, No traffic shows up on the Queue and when shes browsing/downloading. However When i go to Torch in the simple queue list and go to my ether1-gateway then press start it works but i...

It's good to block ping from the internet to my customer?

Depends, If they have Gaming certin games need to ping like battlefield and CSS etc

good and cheers

just to add, you need port 88 UDP /ip firewall nat add chain=dstnat action=dst-nat to-addresses=192.168.1.2 protocol=udp in-interface=InternetWAN dst-port=88 Also see the network ports been used by Xbox Live on Xbox One and also for Xbox One S http://support.xbox.com/en-GB/xbox-one/networking/networ...

I did come this website http://routerosmikrotik.blogspot.co.uk/ ... l/Mikrotik in Indonesia

have a dynamic internet ip address from the provider and i've added a port forwarding on my mikrotik router so that i can access a host behind. From all other network it's working fine but not from the local LANi You need to create NAT rule. Replace 192.168.88.x with your internal IP and port 8081 ...

Use one of this: http://routerboard.com/ING44V http://routerboard.com/RB44Ge Other vendors maybe not supported, or partially supported. Thats a big help thanks :) How about Intel chipsets as HP seems to use them alot? Edit: This post has seem to answer my question http://www.mikrotik.com/testdocs/r...

Hi all,
I'm running RouterOS on a Dell PC x86, Dos RouterOS support any 4-port ethernet LAN cards?

Just out of question

What dual LAN are you using?

Is it onbroad or PCI ?

Im using transmission on ubuntu with port 51413 and says that is Open when you go to click it. http://www.techsupportalert.com/files/images/pc_freeware/free_online_books/optimize-transmission-windows-transmission-qt-windows-preferences-network-port-number.jpg /ip firewall nat add chain=dstnat action...

Winbox is terrible from a security point of view!If you have to use it remotely then use it over an established VPN connection. Instead of VPN would Teamviewer be any good for security? As i tend to use RDP but not on the default port. http://www.wikihow.com/Change-the-Listening-Port-for-Remote-Des...

Just enable snmp for public community on the other servers too. But note, it is generally not safe. Set authenticated snmp instead. Sent from Android by Tapatalk. I would then set Firewall rules from that IP thats monitering the SNMP traffic then use Drop so it cant be accessed though unwonted requ...

Just wonted to add, i was having problems port forwarding using NAT but this seemed to work for me.
Replace 192.168.1.8 with your internal IP cam and port 8081

/ip firewall nat
add chain=dstnat action=dst-nat to-addresses=192.168.1.8 to-ports=8081 protocol=tcp dst-port=8081

How to block Game Online on Facebook. Only block game. Not block Facebook. All LAN /ip firewall filter add chain=forward action=reject reject-with=tcp-reset protocol=tcp content=apps.facebook.com Single LAN IP block, Replace 192.168.1.4 with the IP you wish to block /ip firewall filter chain=forwar...

How to block all traffic from local network to Internet on port 2042 TCP ?

/ip firewall filter
add chain=forward action=reject reject-with=icmp-port-unreachable protocol=tcp dst-port=2042

replace inside the script the contents on <!!!> with interface name, ppp name, or ip address /queue simple add limit-at=1M/1M max-limit=1M/1M name=source-1M target=<sourceofinternet> add limit-at=512k/512k max-limit=1M/1M name=user-1-512k parent=source-1M target=<whereareuser1> add limit-at=512k/51...

This is Mikrotik OS problem or CPU?

Have you try looking on the CPU graph at the routers interface

As you mention BT, I assume you have a PPOE client set up to connect to the FTTC modem? If so, uncheck 'use peer DNS' in the PPOE interface HTH Keith Would PPPoE be bthomehub@btbroadband.com and then password bt or is the FTTC username and password different from the ADSL service? Edit I have setti...

Here's a few I have with RouterOS 6.10 /ip firewall filter add chain=forward action=reject reject-with=tcp-reset protocol=tcp content=doubleclick comment="doubleclick" add chain=forward action=reject reject-with=tcp-reset protocol=tcp content=adverts comment="adverts" add chain=f...

Im new to RouterOS and i have a question.

If i wont to input "http://www.spamhaus.org/drop/drop.txt" this list, How do i go about doing it?