MikroTik

tushar

I see that you still haven't enabled wireless-fp / wireless-cm2 package. Why do you use station-bridge as I see it's not slaved by bridge, better use station. Use nv2 instead of any. So what are latency and throughput after that ? Please post [ /interface wireless monitor 0 ] from station. If there...

tushar

I see that you still haven't enabled wireless-fp / wireless-cm2 package. Why do you use station-bridge as I see it's not slaved by bridge, better use station. Use nv2 instead of any. So what are latency and throughput after that ? Please post [ /interface wireless monitor 0 ] from station. If there...

tushar

First things first: As Jarda recommended, please use latest RouterOS version. http://download2.mikrotik.com/routeros/6.29.1/routeros-mipsbe-6.29.1.npk Make sure you are using wireless-fp / wireless-cm2 package. Upgrade firmware : " /system routerboard upgrade " Please give us output of &q...

tushar

upgrading Metal 5shpn will factory reset.

tushar

@jarda,

PM not working..

Skype ID PM

tushar

If you have any account on skype or facebook or whatsapp or BBM let me know so that i can share all data ASAP

Right now AP= Metal5SHPN and Client=SXT Lite5
On SXT Lite

HT Tx Chains 1 Unchecked
HT Rx Chains 1 Unchecked

tushar

@jarda,

Never tried 802.11
when i select 802.11 on client side searching for network never connect.
what settings do you suggest for ISP side and client side?

tushar

ok updated system/packages/check for updates/ Update and install.

tushar

@jarda,

im looking to get best latency consistent without fluctuations.

Still same result too much fluctuations using nstreme.

tushar

@jarda

yes success now i can access my Mikrotik remotely via webfig. Now you can also check my config if i did something wrong,

As per my isp he says for point to point connectivity consistent pings i need to replace my SXT Lite5.

Ok from now i avoid color text.

tushar

@jarda,

i used this command in terminal even you can check my mikrotik router configuration.

add action=accept chain=input disabled=no dst-port=80 protocol=tcp place-before=3
add action=accept chain=input disabled=no dst-port=8291 protocol=tcp place-before=3

tushar

@jarda,

If i want to give access to someone of my mikrotik Radio, what settings do i need in my mikrotik radio to access via browser (webfig login)

tushar

no i did nothing, what should i do now?

tushar

getting request time out and inconsistent pings on my gateway

tushar

It's more relationship problem than technical. If you have any kind of quality issues, you need to force your isp to solve it for you when they do not provide you what you are paying for. Technically you are out of the game if they refused to provide an access for you. One more thing im getting req...

tushar

My Mikrotik SXT 5nD r2 showing wrong information about firmware.

[admin@MikroTik] > system routerboard print
routerboard: yes
model: SXT 5nD r2
serial-number: 46AD0287BF06
current-firmware: 3.08
upgrade-firmware: 3.07
[admin@MikroTik] >

tushar

Anyway why you gave them metal if it should be obviously ptp connection? Two sxts in bridge would be much better. Building new connection with one side single chain and other side dual chain doesn't make sense for me. Do they use your ap for other clients? @ Jarda Sorry for late reply, this what i ...

tushar

even i want to access my Mikrotik 5shpn radio from home which is installed on ISP premise. How can i access radio from winbox.

tushar

Hard to understand. Try to clarify with your ISP.

Sir

i tried to contact my isp but they said its not possible for me to access my Metal 5SHpn from my home.
please guide me if there is any way to access my mikrotik device from home.....

tushar

I need help, i have taken point to point connectivity from ISP providing my own Mikrotik Metal 5shpn at ISP site and one installed at home Mikrotik SXT lite5, now my question is how do i know my AP installed at isp site is secure no one utilizing it to provide internet through it. As per my ISP i c...

tushar

Thanks for assisting it worked great

but WiFi range is not what i expected, can i use some other Antenna to increase maximum WiFi coverage area like ubiquiti AirMax Omni Antenna?

tushar

mcdebugger; Can you please brief little bit more i am new into this mikrotik OS. Where to change all these settings in my basebox2 OS, like where to assign static IP 192.168.1.2 My goal is to expand WiFi range of my existing linksys router just connecting LAN port of basebox2 wired with Linksys Rou...

tushar

How to configure and connect Basebox2 to my existing linksys router to extend my wifi coverage. Linksys router connect with basebox2 with wired and basebox2 will work as wifi repeater so that i can use my all wifi devices. IP address all provided by Linksys router only. Same thing i achieved by my ...

tushar

Network Diagram to join these two routers wirelessly to use internet in my room, what settings do i need in my mikrotik router.

tushar

Dear All,

I want to connect two router linksys E1000(DDWRT) and Mikrotik RB951Ui-2HnD wirelessly to repeat signal or extend my wireless range. i tried wireless-scan-found my linsys AP selected and Connect nothing happens. What i'm doin wrong or is not possible to connect both router wirelessly

tushar

Using high gain antennas will not solve anything. Antennas increase their gain by channeling RF power on desired directions while reducing it on others. This works if you have an intended target area, but since you need omnidirectional coverage, this is not needed. Go with low gain antennas, ideall...

tushar

I'm pretty sure a BaseBox2 will do. It's worth a try with "small" omnis. In case it won't satisfy your needs, you can still go for antennas with higher gain (and probably lower TX power). In most cases the problem is not TX power but RX sensitivity - ordinary wireless clients don't have 1...

tushar

cdiedrich you mean 2.4GHz Basebox2 will do using omni directional antenna, no 8dbi antennas. 2.4GHz will cover more large area and penetrate brick walls easily.

tushar

Dear all, which device should i choose to make my home Full WiFi no need to install second wifi routers to cover blank area. As per my knowledge Basebox5 will do with 8dbi Antenna. i need some more suggestion from mikrotik pros :) kindly help. You need 2.4GHz or 5GHz Access Point? i think 5GHz AP w...

tushar

Is that the outside walls or all walls within the structure as well? structure as well rooms partitioned with brick wall. I need more powerfull AP which can easily penetrate through walls and concrete(ceiling) and from 3rd floor to ground floor without any issue. right now im using two linksys E100...

tushar

How big is your house? It wood and drywall, concrete, or something else?

Area is 450 Sq Yard, brick wall and ceiling concrete.

tushar

Dear all,

which device should i choose to make my home Full WiFi no need to install second wifi routers to cover blank area. As per my knowledge Basebox5 will do with 8dbi Antenna. i need some more suggestion from mikrotik pros

kindly help.

tushar

Thank you Sir CyberTod. below test dont look good to me @ 12:51 PM 4/10/2014 [admin@MikroTik] > /ping 111.125.136.1 interval=0.1 size=1500 sent=2329 received=1947 packet-loss=16 % min-rtt=3ms avg-rtt=10ms max-rtt=96ms One more thing howto do BAndwidth Test. http://s8.postimg.org/3y784ko05/screenshot...

tushar

These settings are ok for Point to Point connectivity or need to change something.

tushar

why so fluctuations in pings 2ms to 8ms to 4ms anyway to reduce it. constant 2ms 4ms 3ms 4ms. If i deploy one more Metal5 at my home roof top will it improve or shall i go for another SXT Lite5?

tushar

For step 1 sent=231 received=231 packet-loss=0% min-rtt=3ms avg-rtt=7ms max-rtt=64ms For Step 2 sent=159 received=159 packet-loss=0% min-rtt=13ms avg-rtt=17ms max-rtt=30ms For Step 3 torrent running sent=884 received=885 packet-loss=0% min-rtt=3ms avg-rtt=5ms max-rtt=18ms Im new in Mikrotik OS need...

tushar

kindly guide me how to proceed... for step 1 and 2

1. ping ISP gateway interval 0.1 size 1500 (according to me 5-10ms)
2. ping ISP gateway interval 0.1 size 15000 (10-15ms)

tushar

Gateway Pings.

CCQ Image

tushar

Update after installing Metal 5 with SXT Lite5 Point to Point.

tushar

Dear jarda,

SXT Lite5 gateway IP is my Metal 5SHPn IP to access it or something else. need to ask ISP person to provide access.

tushar

How to access my remote device which is installed at ISP tower from winbox, installed as point to point connectivity.

Remote device Metal 5SHPn and Home Device SXT Lite5.

tushar

which IP i use to connect my Metal 5SHPn. How to know my Metal 5SHPn IP from my SXT Lite5?
Should i ask my ISP?

Update.....

I asked my ISP not possible to provide access, MODE: Station WDS not in Bridge.

tushar

I like overkill machines :p
Can i access my remote Metal 5SHPn via winbox?
How do confirm my ISP that my device Roof TOP SXT Lite not connected directly to my Metal 5SHPn.

tushar

trying on different Channels and frequency. If you force me to buy Metal i will buy :p

Do you know how to access my Station Metal 5SHPn from my home PC via winbox using its IP or MAC ID?

tushar

Ok Done check screenshot

tushar

kindly guide me how to deselect chain 1 by wireless HT on SXT Lite 5
How much to reduce power?
Signal not more then -60dB?

tushar

Ok installed Metal 5SHPn on ISP side connected to SXT Lite 5 what else i do to get best result any tweaks?

tushar

Right now ISP providing with there own Device no idea what device. See Ping fluctuations 5ms to 100ms with no load. 4Mbps port speed.

tushar

I already purchased Metal 5SHPn for this and SXT Lite5 installed at my home Roof TOP. Metal 5SHPn need to install. can i expect best performance or i need to replace with SXT Lite5?

tushar

Point A (ISP Station where im going to install Metal 5SHPn) to B Distance 1 Km Clear Line of Sight.

tushar

you mean Metal 5SHPn combination with SXT Lite5 not a good solution for Point to Point and SXT Lite5 with Metal 5SHPn not optimized. What you mean by less speed Port Speed bandwidth or throughput High latency? The best solution is use the same devices for uptimal speed SXT = 2X2 mimo = more speed Me...

tushar

Want to confirm are these two Mikrotik Device compatible with each other point to point SXT Lite 5 and Metal 5SHPn. Any compatibility issue by which performance drops or Pings fluctuates too much?

My requirement is low latency and stability for hosting Game server.

tushar

check screenshot and how to take registration table output

please paste registration table output from both sides
tx signal, rx signal, noise, rates

tushar

I asked my ISP to provide me there access to there ROOF TOP SXT device, then i will post result ASAP

tushar

As per device LED Signal are full. weather is fine. my device connected on ISP device in router mode. what more information you want let me know. Dear Sir, Same model installed SXT Lite 5 Home Roof TOP and ISP using there own device but problem is pings fluctuate too much 4ms to 40ms 10ms 60ms 10ms ...

tushar

Dear Sir, Same model installed SXT Lite 5 Home Roof TOP and ISP using there own device but problem is pings fluctuate too much 4ms to 40ms 10ms 60ms 10ms like this not constant. I want best stable pings possible in Point to Point connectivity according to my ISP then i will get stable pings. Basical...

tushar

Dear All, I want to implement Access point to get internet connectivity from ISP to my home via Point to Point. Which access Point should i buy to get better performance reliable and very less Ping fluctuations in gaming. Port Speed 8Mbps. Till now i more lean toward Groove and Metal Series. Distanc...

Search found 57 matches