change local server to 127.0.0.1

But when i copy the oid and make a probe of dBM, i can`t see the value.I only that dBm is okay?

[oid("iso.org.dod.internet.private.enterprises.mot.whispRoot.whispProducts.whispSm.whispSmStatus.radioDbm.0")] this one is working for me (edit view of object end paste this oid).

Eth1 - static IP from ISP. Eth2 - dhcp server to LAN Eth2 connected to switch. Config: /ip add add address=xxx.yyy.zzz.aaa/xx interface ether1 /ip add add address=192.168.1.1/24 int ether2 /ip pool add name=dhcp_pool1 ranges=192.168.1.2-192.168.1.254 /ip dhcp-server add add-arp=yes address-pool=dhcp...

int pppoe-clinet add your conection, next normal NAT with outgoing intraface pppoe-client

If You have same irq on 2 cards (ex. wlan and eth, wlan and wlan) You can have quality problems. Look back on this menu with 3 cards.

Paste /sys reso irq pr

Both.

2,4 in b? How much traffic You have on this interface (and pps)?

Turn off free trial, add link on front page to page with payment and add this page to walled garden.

Turn on nstreme and put some aluminum cookie foil between radio cards to elimante interferences.

If U dont't like this, don't save passwords in winbox. U can store all in Your brain

Yes, on AP U don't need vlans.

Show Your MT:
/ip fire ex
/ip ad ex

On the CPE add vlan101 to wlan interface. In bridge add ports: ether1 and vlan101.

Tested 5GHz link with converter (e1 to ethernet). Not working correctly. If U must send e1 over radio (free band) use radwin (winlink family).

Upgrade to 2.9.38 and next to 2.9.51.

U have public IP or local?

Put new mt firmware (npk files) to router (ftp A.B.C.D), reboot router and check version

Very good idea.

Cable shield is grounded? If not mayby this is a problem.

Now 48V, but on 18V works too.

I have > 100m and work fine Check connections between wires.

Try to change ant. connector on the card (connect pigtail to other connector).

Try to log to the windows with user and pass same as on the outlook and use MSIE.

U have problems with senao cards. Change power (to max. 13 on 5GHz) or change cards With senao and rb it's normal.

Battery?

I tested 2 RB 532 with 8602. Max power in 5GHz is 11 and 12 dBm. If I power up (or set default), RB reboot. On 6km link I have -72dBm. Time to move up on the 120m and change card...