MikroTik

deanMK

you are monitoring only virtual veth interface container is siting on. from vnstat dockerhub page: --network=host is necessary for accessing the network interfaces of the Docker host instead of being limited to monitoring the container specific interface this is currently unsupported in MikroTik co...

deanMK

Hi Mikrotik Members Because RouterOS dont have native function for monitoring WEB usage traffic itself, i was put vnStat as container on my hAP AX3. Container works as should, but i have one dilemma. When i load IP where container is running, i got that vnStat is monitoring eth0 as interface i suppo...

deanMK

+1 for adding apk download. What is the problem to add a link to your official website like for any other files? Why do we need to use third-party sites to download apk? Google Play is third party website? Its default site for all Android devices, and likely most secure website for hosting Android ...

deanMK

Will wait for 7.18.X that will sort it out this reported things.

deanMK

Add a dstnat firewall rule . This is what the Docker/Podman --publish flag does for you automatically, which you must do by hand on RouterOS. Details . This also makes sense. Thanks for this information. I first time have situation like this, and today learned something usefull. Well, if we assume ...

deanMK

@mkx thanks for answer. So it seems that this cant be done in way i liked. No matter, will find another acceptable solution for this.

deanMK

Hi Mikrotik members I have setup MySpeed into container, for monitoring my Network speed. But when try to load into browser it need to insert with port 5216 which is default port on mySpeed portal. Is there some NAT settings that i can force this process to "auto enter" the port when MySpe...

deanMK

Its almost 2025 and Mikrotik still put 1GBPS port on their AP... What a shame. Nothing interesting here to make me to purchase. Another newsletter... still nothing for LTE/5G that works outside EU, no Audience AX, no mixed voltage PoE switches, no devices with LCD & nothing more in the RB5009/L0...

deanMK

Hi Mikrotik,

I searched recently for build container with integrated nginx with php and phpmyadmin in one build, but cant find if there exist something like that. Someone who maybe use something like that, or some manuals how to do that on my Ax3?

Thanks in advance

deanMK

Ubiquity just released an Cloud Gateway Max fo about 250 euros.. 5 fully capable 2.5gbps ports and 1.5gbps ISP thoughput.. I think its time to releease 5009 based device with full 2.5gbps ports ! https://uk.store.ui.com/uk/en/category/cloud-gateways-compact/collections/cloud-gateway-max/products/ucg...

deanMK

Wait for RB5009 with all 2.5G LAN ports and 2xSFP+ inputs.

deanMK

Replaced the cable with basic Cat 5a UTP cable, and boom it back to 1GBps. I dont know what is happening, but may be the thing that UBNT have issue with some STP cables. I found that my U6 Pro was made in 2227R that meen it is manufactured in 27 week from 2022 year, device what is affected from usin...

deanMK

It should be 1GBps at least With a 1000Base-T port it won't be more than this. Exchange cable. Yes i tryed with another cable Cat6 UTP, but it shows the same speed. I didnt expect to goes under 1GBps, but it should keeps at 1GBps. Currently it downgrades my speed to 100mbps for that port. https://i...

deanMK

Hi MKT Fans Recently i installed a UAP U6 Pro AP into my existing network using U6 at PoE+ adaptor https://eu.store.ui.com/eu/en/pro/category/accessories-poe-power/products/u-poe-at , purchased from UBNT. But when check the connection speed between the LAN port and U6 AP it shows 100mbps somehow. Ho...

deanMK

The first thing I heard in my MTCNA was "long-term is stable, stable is beta"! Unfortunately I have to say thats so 100% true. ROSv7 is sooooooooooooooo far away from a production-ready stable. Its like they fix 2 bugs and introduce 10 new bugs with each release. A real nasty thing is, th...

deanMK

Someone tested this on hAP AX3? How is wifi on this build?

deanMK

After a while, it seems that Wifi is not stable on hAP AX3 on 7.10.2 ! Constant internet drops, or poor wifi quality. On my Old hAP AC2 wifi is muc much stable and better then this on hAP AX3.

deanMK

Hi Mikrotik I use hAP AX3 with container package installed and working. Today installed NGINX container, and all works fine, except that on every file i got "Forbidden 403" error , no matter on permission i set on file. nginx container is working properly: [admin@MikroTik] /container> pr 0...

deanMK

https://mikrotik.com/download/changelogs Top of the page since 7.10.2 is now latest version for stable for ROS7. Just tested 7.10.2 stable and works good for me. Also noticed that into this build Wifi Led on hAP AX3 now shows activity (led blinks when traffic is made via some of wifi interfaces).

deanMK

What's new in 7.10.2 (2023-Jul-12 12:45):

*) wifiwave2 - fixed interface hangs on IPQ6010-based boards (introduced in v7.9);

From where is this changelog? i cant find it nowhere what is changes into that version.

deanMK

*) wifiwave2 - fixed interface hangs on IPQ6010-based boards (introduced in v7.9);

What meen this bug fix? What interface hangs?

deanMK

@normis ?

None?

deanMK

https://i.ibb.co/vqfvPkG/20230702-085719.jpg With this ISP speed get constantly Youtube buffering on my AndroidTV box even on 1080p with wired connection. Wifi randomly goes down and for some moments i cant load nothing at all on my smartphone. HAP AX3. This device is worst one until i using Mikrot...

deanMK

Sooo, maybe I retire U6 Lite soon and go back to Mikrotik wireless again. I don't see any errors in logs whatsoever. I mean, im running basic setup but i don't see reason the reason wifi will not work with vlans. Dont make mistake. UBNT wireless is superior compared to buggy Mikrotik wireless. Stay...

deanMK

Randomly causing internet downtime or very slow speeds and after some time back to previous state. I cant even load video into 1080p with my hAP AX3. Wired connection !

deanMK

WiFi performances are still crap. hAP AX3.

deanMK

I am not sure you can.

On previous configuration wifi led blinked like every other led on router. With current Dual WAN configuration, just is solid green (no blink) even there is more then 6 devices connected to some of both wifi interfaces.

Mikrotik Stuff?

deanMK

That should be network activity.
To the right is wireless activity.

Yes but Wifi led is not blinking when wireless devices makes a traffic. My question is how to enable to blink on activity?

deanMK

Looks mostly correct to me, sure it isn't a DNS issue? You have 192.168.88.1 set as DNS in your DHCP but i'm missing; /ip dns set allow-remote-requests=yes Also i think your recursive routes aren't correct; /ip route add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway= 192.1...

deanMK

Hi Mikrotik ! today i played a little with my hAP AX3, and noticed that WiFi indicator LED is not blink anymore, just is light green constantly. What activity that led showing? I checked System > Leds https://i.ibb.co/dmXcXL6/12.png https://i.ibb.co/MVqcFFL/AC333.jpg i googled and found this post ht...

deanMK

Looks mostly correct to me, sure it isn't a DNS issue? You have 192.168.88.1 set as DNS in your DHCP but i'm missing; /ip dns set allow-remote-requests=yes Also i think your recursive routes aren't correct; /ip route add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway= 192.1...

deanMK

Hi ! I setup this configuration for my Dual ISP, and into console can ping 8.8.8.8 sucessfully, but when connect some device to LAN or WiFi, then show that have internet (notification icon in Win 10), but i basically cant open nothing. Whats wrong with my configuration? Some help? # 1923-06-24 02:09...

deanMK

Wifi performance still poor in this build too.. Constantly buffering on smartphones. But think that MKT devs are in good way to push first "stable" build.

deanMK

I cant make any difference into wifi stability. No link downtime for last 24 hours. Works stable for me. hAP AX3.

deanMK

Installed 7.11alpha version today on hAP AX3. Will inform here if some problems occured.

deanMK

Resolved this by replacing with another Android TV box with gigabyte LAN port. No issues so far with connection after wake up from sleap. All works smoothly.

deanMK

Really weird. Until device is power ON, it renew the lease automatically. Problem is when turn OFF, and after some time turn ON again. Then not get lease from DHCP automatically. Only way to back into online state is to unplug/plug the RJ45 connector from box.

deanMK

@Amm0 tryed with netmask 24 and removing the device id. Not getting IP when lease is expiring. Other tip?

deanMK

The IPv6 fe80::/64 is what's called the link local address. Basically same as a 169.254.0.0/16 address that happens in IPv4 without DHCP. So that's unrelated. Did you try setting the netmask in the DHCP Server to "24" instead of blank? Not sure that fix, but has help with DHCP in past for...

deanMK

@Amm0 after 30 mins. Box dont renew the lease and status still stuck on "waiting". Box is connected directly to MTK.

Also noticed this. Why box get IPv6 ? when box connect successfully ipv6 is not shown there.

deanMK

Could be a case of cheap Android trash? To help eliminate some possibilities, Have you tried removing TP-Link switch from the equation and connect directly to MT? Have you tried disconnecting connection from TV and connect to another device, such as laptop. Does it experience same issue? 1. Yes i t...

deanMK

Someone to help here? Its really frustrating why Android Box dont renew lease in time. Tryed to set lower value in lease time, but after expiring, it dont renew again, until plug off the cable and pull on again from switch.

deanMK

Hi people I have obe weird problem that cant fix myself even read too many threads here on mikrotik forum. I use LAN 4 via cable to connect my Android TV box. When connect the box for first time it get connection and all works fine. But after i turn off my box and dont use it for some time, on anoth...

deanMK

Someone to propose other solution except buying 100mbps switch and put it before Android Box ?

deanMK

I had the same issue and after reading this thread, I just disabled 100M connection on the affected eth port (connected to my TV), and left only 10M and 1000M. Works like a miracle now! Screenshot from 2021-08-06 15-05-01.png This worked for me too but little different configured. Before on every p...

deanMK

The error message you show, I've seen as well. Other wifi issues I've encountered are related to PMKSA or clients simply not being able to connect anymore (password prompt even for a known network and nothing further). Some issues are solved with 7.10b5 (now b8). There are alpha versions around for...

deanMK

.... Would've been nice to have the "fixes" from 7.10beta5 in this release. I dont think so. That will be included in 7.10 stable release ! Mainwhile i got "MAC@wifi1 disconnected, key handshake timeout, signal strength -74" errors into console on my AX3 and devices not connecti...

deanMK

So to delete this port right ?

Tried several times but every time show me Error message when try to connect to wirelesss network.

How do you meen to use Quick Set to activate this ? This is too confusing

deanMK

Hi dudes ! I want to connect to existing Wireless connection, and for that follow this manual: http://wiki.mikrotik.com/wiki/Connect_to_an_Available_Wireless_Network I run all steps, but when click "Scan" and double clicked on SSID that i want to connect, give me error: "ERROR: scan ...

deanMK

This is the same configuration but with own dns and IP-range
This is what you need

I dont need other DNS servers, and IP ranges.. This can be more simple to configure? i`m new in RouterOS and for me this configuration is Science Fiction

deanMK

Not really.. Watch the tut. in first post, ,and you will know what i need. So.. 1. I have existing wireless network in my neigbours from Router Speedport W503V. So i want to get wireless signal from that network, with my Mikrotik, and share that internet connection via LAN ports. Is now clear? Your ...

deanMK

Yea sure ! http://i.imgur.com/cpFr92E.png I follow tutorial posted in first post, but problem is when delete the wlan interface. Because in next step, says turn wlan int. into station mode. How to turn wlan int. into station mode, if before wlan int. is deleted.? Do you want to make mini tutorial ho...

deanMK

Install the "wireless package by "system" packages

Its allready installed and enabled.. See the image below..

deanMK

Hi dudes ! I want to connect to existing Wireless connection, and for that follow this manual: http://wiki.mikrotik.com/wiki/Connect_to_an_Available_Wireless_Network I run all steps, but when click "Scan" and double clicked on SSID that i want to connect, give me error: "ERROR: scan n...

Search found 54 matches