Ive been reviewing the other articles over the past couple years on Wifi Roaming on Tik devices, and other manufacturers. Does anyone know if software version 6.42.1 has built in support to push clients to an AP with a better Signal? The devices on the network for the most part are 2017/18 I- device...

Is there a feature in Capsman to Disconnect a client with a low signal, and push them to an AP with a better signal? I saw a mention of it in another forum post, but cannot find it in winbox. Does anyone know where this feature is? A screen shot would be EPIC. Thanks in Advance

in capsman u can set signal limit if its gets too low that ap automatically kicks out that device and eventually device will connect to another ap with a better signal

Where do I set this signal limit in Capsman?

Heres my question about this with config 3- rb 951's, all interfaces bridged, and capsman installed as master on one, and the other 2 are clients all three are connected by ethernet There is an additional rb 750 that acts as the dhcp server plugged into the Capsman master. Can i set all 3 rb951's as...

I ment the system you are connecting to I have 3 separate devices to test with on the internal network- 1- microsoft exchange 2010- not fully setup- posts a generic webpage 2- Microsoft iis 7, not fully setup with https webpage 3- apache web server hosting VM ware client download, https also- fully...

Is there a firewall on the local system preventing connection?

The ISP has informed us that they have provided us with a bridged fiber to ethernet connection, and that it isnt firewalled.

Check your rules! Inside to external Ip addreses are missing. You can masquerad or map each internal address strict to an external address. Gesendet von meinem HTC Flyer P510e mit Tapatalk 2 thanks for the info! i only have one public ip, do i still need to map it outbound? All the other rules work...

I just got back into using mikrotik after a couple year hiatus, and am stumped on a simple setup. Im just trying to forward ports 80,25,nad 443 to my internal web/smtp server.Im hoping someone has a super easy solution that im not seeing from missing a few OS versions since 2.9. Im currently on 5.25...

an RB450 with ROS2.9????

R

Rb 450 with version 3.30

I have a job i need built and tested on a rb 450 with 3.30 on it. I need Layer 3 QOS setup on the bridge to give priority to one lan ip, over all others. Basically Im hoping i can shape bandwidth going thru a 2 port ethernet bridge. is this possible with mikrotik? its going to be inserted between a ...

Yes you can shape traffic with routerboard. You will need to mark VOIP packets and mark the rest packets and set up queue tree with priorities and limits. Examples on how to do that can be found in wiki http://wiki.mikrotik.com/wiki/Main_Page Im looking for someone to set UP a QOS routine on my 450...

im currently running version 3.30 on a routerboard 450. Ill be in La next week to support a live streaming event that will last for 4 days, 8 hours a day. They have a bonded 3 meg t-1, which works well, but has peak overloads 3 times a day. If i were to install a routerboard 450 on the lan side of t...

Im hoping someone has some experience with RCP over HTTP, and using it in a natted senario, public to private. My challenge is this. One of my clients is hosting an exchange 2003 behind a 2.8.28 mikrotik router. The router is configured with a public address directly connected to a T-1, and the exch...

Where can i hear more about the JoeBonder! I would love to make him famous on my network, if he has a working solution. Please forward any info you willing to release! thanks Matt Bochsler PineValley Networks You have to bond EoIP tunnels! I got it to work at my house, so I took it to a PC shop and ...

Is there anyone who can help me with bonding 2 adsl lines in MT2.9? I currently have 2 separate dsl circuits on cisco dsl modems. The part i cannot figure out, is do you have to bond at both ends of the dsl circuit, or can i only run MT at the Natted router location to give me an agregate bonded lin...