Go rather by 5GHz. If they are lite versions with level 3 license, you can join only one to one device. To get more clients connected to one Ap you have to have level 4 licence on the Ap side.

Thanks. I should be able to connect two SXT 5AC's up to one SXT SA5 AC correct?

Hello, I am not much of an expert on wireless, although I have set up SXT's and created PTP links before. I have a client that is wanting to have a couple guard stations be able to access internet. They're home building contains their switch, and there are 2 separate building not far from the home b...

Hello, I'm wondering if it's possible to run Winbox and automatically have it prefill the address field and password, using the CMD prompt in Windows. We use a database software to keep track of devices, and we would like to be able to start the session, and automatically have Winbox open up with as...

Have you try connect with this routerboard via Winbox?

Have you disabled the firewall on you r PC or laptop?

Yes, I setup many of these with the same computer.

I have a new RB750 that upon boot will flash all LED's on the interface section, blink #1 briefly (as that's the only connection plugged in), and then blink off. I've tried holding the reset button down while power it up, the ACT light will blink, and then I release, but none of the lights will ever...

Have you tried my suggestion?

Gesendet von meinem HTC Flyer P510e mit Tapatalk 2

You mean set the remote address as 10.x.x.x?

Bump

Anyone?

Local is 192.168.0.1, remote is 192.168.0.47

Where is the rest of the 192.168.0.0/22 subnet? Is it on your local LAN or is it broken up and spread out across a wide network with multiple routers? If the IP address of your "LAN" is 192.168.0.1/22, you probably need to enable proxy arp on the same interface which has that IP address. ...

I have a 192.168.0.0/22 network set up, I also have a PPTP connection I use to work on their stuff remotely, however I can't access anything on 192.168.1.x or 192.168.2.x or 192.168.3.x. I'm trying to work on their phone system which is on 192.168.1.25, can't ping from my machine. /ppp secret 0 name...

This is what I have so far. I don't know what I'm doing for this kind of setup.

Use firewall/mangle to mark your packets related to the sip traffic (either source IP, either traffic type UDP 5060, either destination server.. depends on your environment) Then assign a different route for your SIP traffic Example can be found there : http://wiki.mikrotik.com/wiki/Per-Traffic_Loa...

I'd like to set up a separate DSL line for only the phone system. Currently they use a coax provider and it's terrible. What should I do as far as setting up for a MikroTik RB2011? I have IP passthrough going on the DSL modem, and the MikroTik is set up to receive a public IP address via DHCP client...

Can you ping the router when connected with vpn? What does your computer show when you try to traceroute to the phone and to the router? Have you setup /23 network on both sides? If I am on a 192.168.1.x address, I cannot ping the router, only the phone system, with tracert, Tracing route to 192.16...

Is proxy arp enabled?

Proxy arp is enabled on the bridge-local

No luck. It seems my phone system on 192.168.1.25 can ping a 192.168.0.x address. I really have a hunch it's the PPTP connection not working right.

check if the subnet on the machine is correct

255.255.255.255

I am using a PPTP connection.

I have a network 192.168.0.0/23 set up and have a phone system running on 192.168.1.25. I can ping the phone system from the router, but not from my machine which I am currently VPN'd (PPTP) in on using 192.168.0.48.

Any ideas?

Are you hitting 100% CPU at these times? It may just be that you are exceeding the limits of the device. If there isn't overhead available there will be issues.

I wouldn't think so with an RB2011.

I can't speak for simple queues, but I use DSCP for my ShoreTel VoIP system and it works perfectly.

Can you post an example? I'm willing to try anything at this point.

This is not from the same router as above, but one of our clients, we generally use the same setup for everyone. # jul/14/2014 20:17:32 by RouterOS 5.25 # software id = ABL4-APBE # /ip firewall mangle add action=mark-connection chain=forward dst-address=192.168.100.4 \ new-connection-mark=sip_provid...

Has anyone successfully implemented solid QoS in these routers? Can't seem to find anyone who's got a working setup.

We have a queue tree set up to prioritize traffic coming from our PBX, however, even if we slam the downstream connection with a steam download, calls will break up pretty bad. Marked the connection and packets in the firewall. Are we doing this right? Screenshot in link below. http://1drv.ms/1n7IXbU

Hello. It seems every wireless MikroTik we have deployed are all having these wireless messages in the log. I have one user who has a site to site VPN and she can only connect wirelessly, but she can't use her software because the link seems to be going in and out. I've attached a picture. It's also...