Can someone please help me with the configuration of the second ppp connection? I have two 3g modems connected: /system resource usb print # DEVICE VENDOR NAME SPEED 0 1:1 Linux 3.3.5 ehci_hcd RB400 EHCI 480 Mbps 1 1:2 USB2.0 Hub 480 Mbps 2 1:3 HUAWEI Technology HUAWEI Mobile 480 Mbps 3 1:4 ZTE,Inco...

How did you set that last part up? I also have the CCR doing NAT to redirect any stray DNS requests back to the .5 box. This is how I redirect all DNS requests to the mikrotik router so the client uses the mikrotik DNS insted of some manually entered DNS on the client's device: /ip firewall nat add...

Create 2 virtual interfaces in metarouter and bridge them to ether1, create 2 meta routers and add vif1 to mr1 and vif2 to mr2. Create another 2 virtual interfaces and assign vif3 to mr1 and vif4 to mr2 in mr1: add to ether1(vif1) ip 10.10.10.104 with desired mac add to ether2(vif3) ip 192.168.10.1/...

I noticed that I did not have internet on wireless so I started to investigate, devices got DHCP lease when connected to wireless but did not respond to ping from router or from device to router. After checking the config, disabled/enabled wlan interface, removed/added to bridge, set ip to wlan inte...

Have you opened the 22 port in the firewall for all interfaces? /ip firewall filter add chain=input comment=SSH dst-port=22 protocol=tcp place-before=0 For PPTP: add chain=input comment="pptp port input chain" dst-port=1723 protocol=tcp place-before=0 add chain=input comment="pptp aut...

Here's how I would do it: Add a filter that adds the IP trying to access port 80 for the first time to an Advertisment list: #Replace 192.168.99.0/24 with subnet that covers PPPOE client pool or regular client subnet it applies to everyone #Address list timeout is the time for witch the client will ...

You can try 1:1 mapping to the client's fixed private address:

http://wiki.mikrotik.com/wiki/Manual:IP ... :1_mapping

You have to add this in mangle rules :
All DNS traffic should be redirected to 192.168.88.1.

The static rule is not correct, is says if traffic wants to get to subnet 192.168.1.0/24, send it to ip 192.168.20.1 but this ip is not part of that subnet and being on the same device it clearly does not have another route to use, anyway... The mikrotik creates the rules for you, you should have di...

If I understood correctly you want the devices from another location to be in the same broadcast as the local ones, I have a working config that does exactly that, the only thing that it will only work between mikrotiks, if you try to connect with a PC to the profile that has bridge it will give an ...

When setting a variable, don't use the $ in front of it. Remove these and see if it works... :set $ lunaclient [:pick [ppp secret get $i comment] 0 2]; :set $ username [ppp secret get $i name]; :set $ password [ppp secret get $i password]; On a practical note, you could simplify the code by using :...

Ok, first you have to open the router's page by writing the ip address of the router in the address bar of your browser, I assume it's 192.168.1.1, you can find it by looking at what gateway any device gets from dhcp. Then click on WInbox and a program will download, after that fill the connect to w...

From terminal with: /interface wireless registration-table pr Or login via winbox or web and in the quick set tab you have a wireless clients section with nice little signal lines or go to wireless->registration table and you see a list of the clients and the signal in dBm and other usefull stuff.

Thank you all for the replys, the sollution I finnaly went for is a RB951G-2HnD because it was cheap and I could use it in other places if it did not work and on its own it handled 40 simoultaneous clients on a slow night without too much stress, i have not monitored the device after, no one complai...

Of course, add a new simple queue rule with source adress being a subnet that covers pppoe pool with unlimited settings at first, /queue simple add target=192.168.99.0/24 then add a new traffic monitor rule for the Wan and set the limit above you would like the magic to happen, and add some code to ...

Hello, I have a script that I use to read info from PPPOE client list and send it to them via SMS, disable the account etc. And it does not work for newly added clients. I have simplified the script and added some logging info to it for debugging, the thing is that after reboot everything works, if ...

Well you can try to add a DNS rule in the router's DNS Static rules with: /ip dns static add address=192.168.0.2 name=www.example.com This way if your computer has the router's IP in the DNS section of your computer's network configuration, and nothing else, when you will type http://www.example.com...

Well the forwarding seems ok but I don't understand why you have 2 masquerade rules? Do you have 2 ISP connections, one on interface UniFi-Internet and one on ether1-gateway? if not, remove the one that is not valid, you should also remove the to-addresses=0.0.0.0 from rule 0, I don't see it's usefu...

Have you tried to disable your windows firewall and see if it works? If it does you have to add winbox to the windows firewall, don't forget to turn it on again after the test.

Ok, I personnaly use PCC load balanceing because I have a connection that is slower and one that is faster and I want the users to use bouth ISP's not be assigned for one day only to one but if NTH load balanceing is the way you want to go, here's the mangle script for 3 connections: / ip firewall m...

my solution to this long time problem as high percentage of browsers home pages are set to google.com add this expression to your walled garden in the host field :^www\.google\.com$ with port 443 now when they are directed to https://google.com the google page will load instead of an error, Better ...

Hello, I have worked with RB2011UiAS-2HnD-IN before but not with so many wireless devices and I wanted to order this model for a nightclub that has a lot wireless users 70+ I approximate, most of them being mobile devices witch will not make a lot of traffic most of them will just stay connected and...

This is how I would do it: First two firewall rules: ip firewall filter add chain=input protocol=tcp dst-port=3389 action=accept ip firewall filter add chain=forward protocol=tcp dst-port=3389 action=accept This allows all traffic on 3389 to be allowed to input and forward chain and then once it rea...

You say that you don't have public ip adresses, in this case you cannot access youre camera from the internet, if the ip that you're ISP is giveing you is public you have to add this rule in the terminal: ip firewall nat add action=dst-nat to-addresses=y.y.y.y to-ports=z chain=dstnat protocol=tcp ds...

Hello, My ISP provides a 700Mib connection via SFP tested with a directly conected PC. I have bought a RB2011UiAS-2HnD-IN thinking that a 600Mhz CPU will handle this traffic, i'm in tests at the moment and for now i just want to obtain the best results for the following scenario, after that i will e...