MikroTik

brasileottanta

Colleagues, tell me, there is a line at 1,500 m., We were reducing antennas, but I noticed that after 30 minutes, the indicators just hang in one place and do not move, it only helps to reboot the devices or to tear the radio link. Hello , I' don't know what's the probs, but you need better aiming....

brasileottanta

Hello guys ,

Any news about different channel width like 1Ghz , 500Mhz and so ?

Thk

brasileottanta

brasileottanta

Hi guys , I upgrade a rb1200 via netinstall with keep old config , but the system lose configuration and install the default . On the serial console system say " not enought memory , formatting NAND " WITHOUT ask a confirmation for this. RouterBOOT ver 3.10 Anyone note this ? Bye brasileot...

brasileottanta

Hello ,

our first long link. Great !!! firmware 6.42.5
Try to set channel to 64800 in CLI, the attenuation in O2 is smaller in higher frequency

Hi ,
How I can do that ? manually ?

thanks

brasileottanta

brasileottanta

Hello ,

our first long link. Great !!! firmware 6.42.5

brasileottanta

after upgrade to 43rc19

brasileottanta

Hello ,

our first test on real link. Distance about 240m , perfect LOS without particular aim.

We using traffic generator for check bandwidth and latency. Test using tcp packet of 1500.

Very nice

brasileottanta.

ps . please make a note on rc59 changelog for Ap Bridge BROKEN !! :-9

brasileottanta

Hello ,

for working with ipad , iphone set this in walled garden:

dst host = www.apple.com

path = /library/test/success.html

brasileottanta

brasileottanta

Hi Today I have a hotspot site where the user only have to hit accept to grant free Internet. Is their any solution where I can connect the login button to act as a like button in Facebook? So that the user have to like our company Facebook page to access free Internet. Regards Hi , see here http:/...

brasileottanta

with this script you can remove all ip-binding entries.

ros code
ip hotspot ip-binding remove [find]

Thanks.

Do you know a script that remove all ip-binding of specific server ?

like this : ip hotspot ip-binding remove [find] server=myhotspot

bye.

brasileottanta

brasileottanta

I need a script for ROS , to delete all ip-binding inside hotspot.

I try some script but with no lucky.

Any working solution ?

Regard

brasileottanta

brasileottanta

Yep. You must trigger PHP with "<?php" to access PHP variables: <?php $ip=$_POST['ip']; ?> unbinding.innerHTML = '<iframe src="http://xxxxx/binding-off.php?ipclient=<?php echo $ip; ?>" "width="1" height="1"></iframe>'; Thanks.:-) It's incredible how com...

brasileottanta

Hi , I have also this probs to pass a variable : <?php $ip=$_POST['ip']; ?> <script> ............ var unbinding = document.getElementById('unbind'); unbinding.innerHTML = '<iframe src="http://xxxxx/binding-off.php?ipclient=$ip" "width="1" height="1"></iframe>'; ......

brasileottanta

First stop, I must note that despite the name, having PEAR2 itself is not required.

In fact, the syntax is very simple and logical. It was some time since I programmed and I must say that the syntax of these languages is strange!

Thanks again, I'll try PEAR2_Net_RouterOS.

brasileottanta

brasileottanta

The syntax for getting array members (and that's what comm() returns - an array of arrays) is with "[]", not ".". So replace $remove.id with $remove[0]['.id'] Thanks a lot !!!! I see that you use Pear2 Php , I use RouterOs api php . What is the main difference ? Bye :-) brasileo...

brasileottanta

You need to first do a "print", and get the ID of the entry you want to remove, and only then pass that ID in the remove's "numbers" argument (same as your second example, but with the ID instead of "0"). Tthanks for replay. <?php $ip_host=$_POST['ip-host']; require('r...

brasileottanta

Hi , I need a php script that delete a host from hotspot/ip binding. I try this : <?php require('router_class.api.php'); $API = new routeros_api(); $API->debug = true; if ($API->connect('1.1.1.1,'xxxxx','xxxxxx')) { $API->comm("/ip/hotspot/ip-binding/remove/0"); $READ = $API->read(false); ...

brasileottanta

Just put the dst host dst port and protocol into walled garden ip list. I think thats it!

Hello ,

Is not enough . Ip of facebook change quickly. Sometime work , sometime not. ( for smartphone and tablet ) .

Bye.

brasileottanta

Thanks. I found a solution to work with hotspot placed in NATted network . Basically using external captive portal. This is my working configuration. According with your request. What we need : 1 - a web server with FQDN or public static IP ( for facebook app registration ) 2 - a MT appliance on any...

brasileottanta

Anyway here I made some tutorial for what I've done, here is the link: http://blog.dyasrtrw.net/2013/04/login-hotspot-mikrotik-with-facebook.html It's using Bahasa (Indonesia Language), so if you want to read it in English, use Google translate :) Or click here to auto translate to English, Hello ,...

brasileottanta

Hello brasileottanta,

After restore a config from other RB , ..........
would you please so friendly and tell us first from which "other RB" you were taking the configuration backup?

Hi , sorry for delay

we have restore from RB 1100.

Thanks'

brasileottanta

Hello Guys ,

I have a problem with a new RB Metal 2SHPn with pppoe client interface . When we try to create interface , the system say : could not create interface.

ROS 5.22 and firmware 3.0

Any solution ?

thank's in advance

brasileottanta

:D That done the job - I can not believe my eyes! Explain please :) I have also turned off flow control on the rb250's before I made your suggested changes and it stopped the pauses. Should I re-enable them? The 1200's ether10 have a hardware(?) bug, it causes this problem. Search for this problem ...

brasileottanta

Hello ,

we have a rb1200 with ROS 5.22. After restore a config from other RB , we have noted in switch a strange thing , see the image.

It's normal ?

Thank's in advance .

brasileottanta

yes you can. but we will soon have Grove A-2Hn also.

Ohoh , fine , we waiting ..

thank again.

brasileottanta

Hello guys ,

Can I install L4 license on groove 2hn ?

Thank you

brasileottanta

brasileottanta

Attach image of 250gs .

Any suggestions ? No overloads on ports. ( this is a 5 min. activity )

thank's

brasileottanta

brasileottanta

Hi,
Fewi says
Specific answers require specific questions. When in doubt, post the output of "/ip address print detail", "/ip route print detail", "/interface print detail", "/ip firewall export", and an accurate network diagram.

Thank for remember.

brasileottanta

Hi , I have a rb1100 with 5.6 and have issue with switch configuration. I set 1 port as master , assign a dhcp server , pool , routing and firewall rules. Every work fine , but when i add a 2 port as slave to the first one , for few seconds all works , but after 10/20 sec no traffic pass , no pingin...

brasileottanta

Hi ,

Problem solved

Add ip to IP Binding on hot-spot configuration and not in walled garden.

Thanks for all

brasileottanta

brasileottanta

Of course , but also with insert ip in walled garden don't work !!! This is the strange ...

So , now i set other RB ( starting with a vanilla config ) with same configuration to test if the problem still again.

Thanks

brasileottanta

brasileottanta

Hi ,

pinging on all eth work only if clients are autorized from hot-spot .

brasileottanta

brasileottanta

Sounds like a problem with the network behind the router, and not like a problem with the router. I have this : lan1 10.0.0.1/20 lan2 10.0.3.1/24 lan3 10.5.50.1/24 lan4 loop-back for hotspot 172.0.0.1/32 arp is enable on all and tree PPPoE server ( one for lan ) internet -> 192.2.0.32/24 inside fir...

brasileottanta

Do you have address pools configured on the Hotspot profiles, or the Hotspot user profiles? If so you're poison ARPing the network. Change the address pools to 'none', and try again. No , this is correct. No pools inside hot-spot . ( no universal access ) So , i ping some ip like 10.0.1.x/24 and 10...

brasileottanta

Yes , i do that. I think that the 3th is the correct one. But i check inside firewall of RB1100 and the only rules are about hot-spot. Normally traffic thought lan's is permitted and generally i had some rules to block them. Also , i don't ping from RB1100 hosts on lans. Only arp-ping work. I check ...

brasileottanta

I have other little prob :

i m connect on eth0 with 10.0.0.x/24 and want reach a host on eth1 without using a bridge.

Any suggestions ?

brasileottanta

brasileottanta

Thanks , work great !!!!!

a creative solution

Brasileottanta

brasileottanta

Why 10.1.0.1 ?

brasileottanta

Hi , I have tree hotspot on same router with this config: eth0 ->dhcp0->hotspot0 -> 10.0.0.1/24 gw 10.0.0.1 dns 10.0.0.1 eth1 ->dhcp1->hotspot1 -> 10.0.3.1/24 gw 10.0.3.1 dns 10.0.3.1 eth2 ->dhcp2->hotspot2 -> 10.5.50.1/24 gw 10.5.50.1 dns 10.5.50.1 i set a static entry in dns , exit ->10.0.0.1 , so...

brasileottanta

Yep ,i know.

So , about 300/400 client and simple queue with radius auth.

bye

brasileottanta

Hi ,

you need authentication for this.

If you don't want hotspot , can use PPPoE server with local accounting or MAC authentication .

bye

brasileottanta

Hi ,

On RB1100 , how many PPPoE client can support ? And how many PPPoE server ?

thanks

brasileottanta

brasileottanta

Thanks for answer.

We investigate on overload .

brasileottanta

brasileottanta

Hello Guys ,

in statistic , we have noted more paused packet on tx port . This port is linked with other rb250 at 1gb and on this port we have no pauses.

Any suggestions ?

barsileottanta

brasileottanta

Hello , I have a problem with rb1100 and ros 5.6. Configuration: eth0-eth5 -> in bridge dhcp on bridge. Dhcp assign a ip to an host with MAC xx:xx:xx:xx:xx:xx . When i ping this ip , we have no replay. Check the arp table inside host and the MAC is the MAC of bridge !!! Check dhcp inside rb1100 and ...

brasileottanta

try to disable proxy (in Hotspot, uncheck "Transparent proxy", AFAIR)

Thank's , problem resolved with a fresh installation . But , we don't know how .....

brasileottanta

and what does traceroute (from customer's computer to the Internet) show when problem appears? traceroute stop to the router side ( from customer's pc to router ) . After 5/6 sec restart . We have change the ethernet adapter , but the problem still again . The processor is on 20/30% max during peek...

brasileottanta

connection stop
?

Customers don't surf internet .....

brasileottanta

image doesn't work, upload JPG maybe

Now is jpeg

thank you

brasileottanta

Hello ,

see the image , when routing go to 10%-15% of cpu , connection stop .

Ros 5.0RC5 on x86 Atom dual-core , 2Gb ram , hd 70Gb , about 70/80 connection with hotspot login and 4/5 PPPoe clients .

Any suggestions to resolve ?

thank's

Brasil

brasileottanta

This is our login page

brasileottanta

if you use bridge, execute /interface bridge settings set use-ip-firewall=yes Thank's !! I forgot this :-( so , take a look to this example : / ip firewall mangle add chain=prerouting protocol=tcp dst-port=80 action=mark-connection \ new-connection-mark=http_conn passthrough=yes add chain=preroutin...

brasileottanta

Hi Guys , I want to set max bandwidth for limit generic traffic . I found many examples to write a rule or simple queue to limit , but no one work. My ros is 3.28 and the rules in 2.9.50 work perfctly. What is the change from 2.9 to 3.X in firewall programming ? ROS 3.x and 2.9.x use the same sintax...

brasileottanta

Hi Guys , I have a rb133 with 3.15 and i set correctly bandwidth limit in ethernet interface to 1mbit. I also have a rb500 but in ethernet interface , in general tab , we haven't the possibility to set bandwidth. The firmware on rb500 is 3.24 . Is a driver issue or this feature is removed from 3.24 ...

brasileottanta

downgrade to v2.9.x will reset the wireless configuration.

Fine , great feature !!!! ( ironic )

Please , add this probs in readme-upgrade in evidence !!!!!

brasileottanta

Hi ,
yesterday , we have downgrade a cpe ( rb133c) to 2.9.50 and no probs with ip , so the ip lost is a bug !!!

But , carefully , the downgrade lost the configuration. If you have a remote router , you lost the connection !!!

Bye

brasileottanta

We have made now , but we have lost the connection !!!

The downgrade clear the configuration ?

Thank's !!!

brasileottanta

Hi guys ,

How we can performe the downgrade ? We have upload the package to router , restart , but everytime is a 3.2 .. not downgrade!!!

Thank's

brasileottanta

Hi ,

at this moment , we don't found a solution for this issue .

Is possible to downgrade to 2.9.50 from 3.x ?

Thanks'

brasileottanta

upgrade to 3.3

We have 1 client with 3.3 , but same problem ...

Thanks'

brasileottanta

Hi guys ,

we have upgrade our network to ROS3.2 . No other change are made ( link , quality of signal , interference are the same ).

But now , our client lost every 10 min. the ip from external dhcp server .

Any suggestions ?

Thank's

brasileottanta

Hi guys ,

What ' s better to connect client , pseudostation or WDS ?

In version 3.x of ROS , the issue off-set in xr5 to work at 28db is the same of 2.9.xx?

thank's

brasileottanta

I have same probs on 2 rb133c . For reconnect , i do a disable lan and enable .

Any suggestions ?

p.s ROS 2.9.49 but also with 2.9.38

brasileottanta

Hi ,

try Italy for 5.180 to 5.700

Bye

brasileottanta

Hi ,

we have a BS with XR5 in 5.4ghz. Set the correct domain for use this freq ( we use Italy )

Bye

brasileottanta

Hi Mipland,

if you want , we try a link to about 400km. We have a tower on Vesuvio and a lot of friends in CB ...

Bye

Marco

brasileottanta

E vai cosi !!!

Ottimo lavoro

Saluti

Marco

brasileottanta

Hi guys ,

i have same problem with XR5 with 2.9.42 . When use winbox to control/config the AP , the system come instable. Deauth , variation of noise-floor ( from -100 to -115 ) .

RB532 with 2 miniPci ( 1 XR5 and 1 SR2 ) , but with problem only on XR5.

an suggestion's ?

brasileottanta

Today , i have connect a client with osbridge to a new BTS at 5ghz with xr5 .

Identical problem. Random disconnection , lost pinging .

Perfect LOS , signal up to -48 .

bye

brasileottanta

Hello Brasil, I always recommend leaving the Tx power setting to default. If you decide to change it, just remember that the Xr5 has a 10dB power offset. So if you set the MTik to 18dB you will actually be outputting 28dB of power. And I always recommend grounding the card. Thanks, Mike Thank's Mik...

brasileottanta

This is the rf stat of 1 CPE osbridge xli5g RF Statistics: Watchdog Timeouts: 0 Hardware error interrupts: 0 Beacon Miss interrupts: 0 Recv Overrun interrupts: 0 Recv EOL interrupts: 0 TXmit Underrun interrupts: 0 TX Management frames: 38 TX Frames discarded prior to association: 0 TX Frames discard...

brasileottanta

Hi guys ,

on datasheet of XR5 say : AR5414 , but my MT with 2.9.40 say the chipset is a AR5413.

Is a problem of ROS or the datasheet of XR5 is wrong ?

Thank's

brasileottanta

OSbridge have a problem with PPPoE ...they mess with the mac of the pppoe server . Yet another thing to throw in the bin

Hi ,

but we don't use PPPoE , the osbridge is configured as bridge ( trasparent ) .

Is a MTU problem ?

Thank's

brasileottanta

Hi ,

I have some problem too.

No solutions ?

Thank's

brasileottanta

Hi Mike-Ubnt, we have now an xr5. Our BTS have 1 sr5 and 1sr2. Work fine and regulary. We have change sr5 with a new xr5 , but no special things .... So , 2 questions : first , in MT 532 with 2.8.40 , how tx power setting for max performance ? ( actually we have set to 28db ) second , Is necessary c...

brasileottanta

Hi Guys ,

We have 6 CPE with 133c and some radio ( senao , ubnt ) , on 2 of this , no MAC Telnet work .... Every CPE have identical configuration and release ( 2.9.38 )

Any suggestions ?

brasileottanta

i see that too, so i thought that ubiquity made its cards for US use primary (5.7Ghz) and operating from 4.9-6.1 Ghz as atheros chipset. As you know amplifiers work best @ certain freq, so 400mw is just another LNA over atheros reference design. Thank's. We set our BTS on 5.7. In Italy only the fre...

brasileottanta

For precision:

5500 -94db
5520 -95db
5560 -96db
5600 -98db
5660 -101db
5700 -102db

Any suggestion or experience ?

brasileottanta

For two reason:
- the simpliest: there's lower noise on 5800 than 5500;

Why ? No other 5ghz equipment in area ( lab test )

- your antenna is not correctly adapted to 5500.

We have tested without antenna , on lab.

thank's

brasileottanta

Hi guys,

If i set a freq to 5800 , the noise floor better then freq low ( like 5500 ) . Why ? I use SR5 and RB532

thank's

brasileottanta

Hi ,

the only difference with 2 bts is the enclosure. One is in plastic , one in alluminium .

Now , I test a SR5 with RB532 and the noise floor is -95 ( no other wireless net in area ) . Why is low ? .

Bye

brasileottanta

same channel, same no configuration (minimum = ssid, band, frequency ip)?

Yes

equal everithigs ....

Now I change other things .. but ....

brasileottanta

I'm frustrated :-( I install the new bts with sr2 , but no change !!! Same antenna , same cable , same position : with a stupid linksys , my client connect fine ( also client distant 3/4 km .. ) , with a rb112 and 1 sr2 nothing. I test also a 50m from antenna : linksys ping 3 ms , sr2 ping 100/240ms...

brasileottanta

Today I tried my new SR2 with RB112. My problems like with 8602 disapeard. The recieving signal levels from clients are very good (even slighty better then thoose from linksys). Now what I noticed: 1./The client cards hopping over speed rates (they have Tx Rate set to fixed 5.5Mbps in the driver, n...

brasileottanta

Boro , actually the card we use is a Zcom 622h b/g. Work fine and better then Senao . Have 23 db of max power , more sensibility. We have a station with this card ,with -123 noise floor !!! With Senao 8602 Plus ( FCC ) in identical site we have -91 noise floor !!! Bye p.s. we test the sr2 today ....

brasileottanta

http://forum.mikrotik.com//faq.php#1

Where I violate the policy ? and isn't my volonty to violate ...I report a real problem !!!

brasileottanta

What is my post ? ???

brasileottanta

Yes, you are right, but this is not MT, this is basic physics...

Yes , I know that. Only for remark.

We have a lot of problem with MT . We have a real scenario in dense urban coverage.

So , in next days , i post our experience and our problems.

Ciao

brasileottanta

Yes, you are right, but this is not MT, this is basic physics... :lol: If you start from zero (0), and continue in a negative direction (towards -90) then continue towards -120, then -90 is a higher value than -120, capish? eg: High number 5 4 3 2 1 0 -1 -2 -3 -4 . . . -90..... [noise here is highe...

brasileottanta

So , a BTS with -120 Noise Floor is better than a BTS with -90 Noise floor .. Correct ?
Yes, i think this is obviously.

Mipland , on MT and here , nothing is obviously.

brasileottanta

But Sergejs , high noise-floor is better then low ? ( actually we have on a BTS -86dbm and on other -119/-123 )
Thank's
Less noise is always better, so a low noise floor is better than a high one...

So , a BTS with -120 Noise Floor is better than a BTS with -90 Noise floor .. Correct ?

brasileottanta

Really? What's your province?

Naples and you ?

Ciao

brasileottanta

So , every senao have a consumption of 1.3A . At 12v the cosumption is out of range .... Senao and all other mPCI is 3.3V, NOT 12V. So, if we assume the max current consumption: Routerboard: 3W Senao 8602 Plus (FCC/ETSI) : 3.3V*1.3A=4.29W Routerboard + 2 x Senao 8602 Plus = 11.58W Sorry , my mistak...

brasileottanta

You can search in the forum to get more detailed information aboit 'noise-floor' values, e.g. the particular topic gives exact answer, what does 'noise-floor' means: http://forum.mikrotik.com//viewtopic.php?p=33302&highlight=noisefloor#33302 If you are talking about 'noise-floor-threshold' conf...

brasileottanta

RouterBOARD max. power consumption=14W. 2-3W is used by RouterBOARD itself. You can calculate power produced by 3 wireless cards at the maximum I (Power=I^2*U), check the technical specification to get values for I and U. So , every senao have a consumption of 1.3A . At 12v the cosumption is out of...

brasileottanta

Hi Guys,

what is the best level for Noise Floor ?

Thank's

brasileottanta

Hi ,

but Karyal , how the traffic influence signal streght ?

Bye

brasileottanta

Hi guys ,
definitively, what is the better choise of power supply with this configuration ?

RB 112 + 2 senao 8602 FCC Plus ( at 26db )

Power consumption of senao ( datasheet ) 1.3A

Thanks'

brasileottanta

Hi

I have identical probs , but in 2.4GHZ band. I reduce ( but no solving ) the effect switching from B to G mode ..

With 9 / 10 client every work .

what type of board you have ? And what type of card ?

Bye

brasileottanta

with atheros 730meters clear view max 12Mbit but in my case, 34 neighbourhood APs min 2 per channel on all 14 channels Hi , some problems with my station . But i reduce the effect with put every client in G only mode . In B only mode , i reveice the ip from dhcp server external connect to eth of mi...

brasileottanta

Hi ,

no news about this tread ?

brasileottanta

you need to use MT version 2.9.25 or later and turn ON the propritary extensions under the advanced wireless settings

Thank's a lot , now working ...

Marco

brasileottanta

Hi guys ,

anyone have tested this radio with mikrotik ?

Thank's

Marco

http://www.zcomax.co.uk/doc/GZ-901.pdf

brasileottanta

Hi guys,

anyone have notice about incompatibility with a5213 in rb112 with 3945abg ?

I have a rb112 with this mini-pci radio ( zcom - senao ) , with my notebook with centrino duo , i don't see any signal ..... but the notebook work with many other AP ...

Thank's

Marco

brasileottanta

Hi NathanA,

I have similar problem .
With a AP ( no MT ) Prism 2.5 chipset and WDS active , only in wds-slave mode i can connect a CPE ( routerboard 112 with 2.9.24 ) .

Also you , i have read all forum and documentation , but no one have resolved .

Bye

Marco

brasileottanta

Hi , we have used for many time Repeatit solution. The system is simple to use , no more expensive and with in mind a carrier !! BS e CPE with a software managent cost approx ( for 100 customer ) 30.000,00 to 35.000,00 Euro. MT is a good solution , but haven't in mind a carrier ! More complicate to ...

brasileottanta

@MikroTik: Perhaps MikroTik would want to take a look at this code to decide if to include it in some future version? (GPL) Because it's a fact that we can explain, WHY this doesn't work. But as Marco (and others) have said, many cheeeeaapo wireless clients do provide at least partial work-arounds,...

brasileottanta

Probabily , or probabily not ..... depend from answer .. you answer is not correct ( the first answer ) Just for completeness: Which answer is not correct? Best regards, Christian Meis "And PLEASE learn to use the search function of this forum " --> this one is not politically correct ......

brasileottanta

Marco, I don't know how other vendors are doing it, but I know of some code to accomplish this under Linux. You have to do MAC-NAT, inspect (and change on the fly) ARP requests/answers etc. to get a "real" transparent bridge. @MikroTik: Perhaps MikroTik would want to take a look at this c...

brasileottanta

1. It's workaround. 2. WDS configuration is not complicated. -All you need for the AP configuration, mode=ap-bridge wds-mode=dynamic wds-default-bridge=bridge1 (wlan interface in the same bridge). - mode=station-wds wds-default-bridge=bridge1 (wlan, Ethernet interface). I suppose, that's all. Thank...

brasileottanta

brasileottanta , it's 802.11 limitation (not RouterOS). this topic was discussed many times here. Thank's Sergejs , but other os and hardware work in 802.11 standard . How do this ? Example : we have a BTS Repeatit ( soecris hardware with custom linux on board ) and CPE Repeatit can cannect without...

brasileottanta

I don't want to argue with you. Being rude to people here on the forum will probably not get you more answers... Probabily , or probabily not ..... depend from answer .. you answer is not correct ( the first answer ) But as the standard 802.11 wireless protocol only has room for THREE MAC addresses...

brasileottanta

Set wlan1 to station mode Set a public ip on the ether1 such as 192.168.1.1 Setup a dhcp server on the ether1 that gives out a range of ip such as 192.168.1.100 to 192.168.1.200. Setup a default gateway as 192.168.1.1 Go to firewall, go to nat, set general "srcnat" set sorce address as 19...

brasileottanta

Standard question, standard answer: Yes , is a standard question , but at this moment *NO STANDARD ANSWER* !!! You can NOT bridge a wireless station (protocol limitation). Use WDS for that. I think that you don't understand question. And is not a protocol limitation , but a routeros limitation , ot...

brasileottanta

Hi guys,

How to configure a rb112 as a simple cpe ?

I have a wlan1 and eth1 , create a bridge , connect to a remote AP , the system give me the ip ( dhcp server on ap side ) , but no ping .

Any suggestions ?

Thank's

brasileottanta

I had tyied whit the config in http://wiki.mikrotik.com/wiki/Transparently_Bridge_two_Networks and it dosn't work. I suppose that the page have some bugs, because I don't obtain the results showing there, in addition when I add the bridge port using winbox, the connection via ethernet was lost, and...

brasileottanta

I don't think routeros supports Hyperlan 2 but then again, what does? If you can find -anything- that supports Hyperlan 2 please do send me a link; lists@arcticwireless.no Sure , but a friend tell me that in Norway or Finland there is a company with a firmware to use atheros with hyperlan2 , but i ...

brasileottanta

no work again ....

but now we know why ... we have our installation on tv-broadcaster tower , we the broadcaster is off , every things work . When go on , not work ... interference on motherboard ??

brasileottanta

http://www.mikrotik.com/docs/ros/2.9/guide/driverlist[/quote]

Thank's , but do you know what is hyperlan2 ?

bye

brasileottanta

Hi guys,

There is no support for hyperlan2 in routerOS ?

Thank's

brasileottanta

if you use the card with routerboard , do you have a proper powersupply ? under heavy load is this card is sucking up to 1500mA

We use a passive POE at 48V ( original equipment from mikrotik ) . But , we have change the antenna , from omni to panel , and now work fine .

Thank's

brasileottanta

Hi guys ,

anyone have tested this card with RB112 ?

We have a lot of problem , in B/G mixed mode , no connect to other client , only in B or in G work , but pinging directly the wireless card the time is non accettable ( random 5- to 145 ms .. )

Bye

Search found 122 matches

ros code