Hi kaptain,

it is working now, thank you!!!

I deleted the first automatic DAS routing with 0.0.0.0/0 to 172.16.255.254 and changed it to 0.0.0.0/0 gateway l2tp-out1.

Thanks again!

Hi kaptain, thanks for your answer.

The routes are dynamically already set:

I try to get internet working on wlan1 interface on our MikroTik Ceiling AP (cAP2n) through l2tp-out1 client interface. The cAP2n is successfully connected as l2tp ipsec client to our cisco l2tp ipsec server. Interface l2tp-out1 has internet access, I tried that many times with the internal ping too...

Does anyone have a clue?

I already tried that, did not work.

Edit: I saw, that it is not listed under active connections ppp tab.
It also does not have any blinking arrows in interfaces.

But the l2tp ipsec client is connected and I can ping with l2tp-out1 interface to the internet....

Ok my l2tp ipsec client connection to the cisco vpn server is working now. I had a phase 2 qm fsm error on the logs from the cisco server. You were right about the encryption methods pe1chl. I had to change some ispec proposal encryption things. I attach a picture if someone is interested. https://a...

I exactly have the same problem.

I try to connect with mikrotik l2tp client and ipsec secret to our cisco vpn server.

Connecting with Android, Windowa whatsoever is no problem.

Tried everything on the mikrotik....

Hi, short progress report, I tried to achieve some progress with a 7db? antenna I had lie around. http://abload.de/thumb/img_20140605_094332d7etb.jpg http://abload.de/thumb/img_20140605_094313hgcf7.jpg http://abload.de/thumb/screenshot_2014-06-05v0ug4.png On tuesday I will post again with my results...

I measured the value of the Capacitor it is 68pF. http://abload.de/thumb/dscn0638l7kg4.jpg http://abload.de/thumb/img_20140604_153931trs3h.jpg If someone is interested in the L-band FET, here is the datasheet: http://www.cel.com/pdf/datasheets/upg2009tb.pdf Will post again when I soldered the MMCX c...

Which solder points do you used for ground and which for data?

@Mikorist, please provide a little tutorial.

Thank you!