What about x86 version? Can you solve the issue i wrote before? Hello, I see that you are a new colleague on the forum and you may not have learned to use the tool. Or don't learn to be pasciente yet. Even though this is not the place to answer your question, here's your answer: https://forum.mikro...

What about x86 version? Can you solve the issue i wrote before? Hello, I see that you are a new colleague on the forum and you may not have learned to use the tool. Or don't learn to be pasciente yet. Even though this is not the place to answer your question, here's your answer: https://forum.mikro...

Problem solved! For some reason, on the Dell R440/540 it is necessary to disable the option in BIOS x2APIC mode (at least in the beta7 version of ROS7). "X2APIC mode" -> Disable After that, it worked perfectly. PS. Before the solution, I activated email support, they were very attentive an...

Please send an email to support@mikrotik.com with specifics about the server and experienced issues.

Thank you, I will do it!

I used the virtual box for the boot, I installed mkt 7 on a disk successfully. So I converted it to raw image and recorded this image on an SSD to boot the physical machine. When booting with DELL R440, "Load System" message appears and then within a few seconds the machine resets. Somethi...

I was not successful with the test machine.
On DELL R440 when booting from ISO, a reboot takes place.
Probably version 7.x is also not compatible with this hardware?

I had tried to do that too,
but I got an error that the installation of 6.x should be licensed to be able to upgrade to 7.x
I'm not in the mood to risk losing a RouterOS license just for compatibility testing.
But thanks for the suggestion.

I already tried to use netinstall to generate boot disk, however I have an error when trying to generate.
and also tried using a netinstal 6.x with npk file from 7.0 without success.

Is it possible to install 7.0 beta on an x86 server for Hardware compatibility testing?
didn't find iso cd-rom or img disk to x86 server

Hello friends, we bought new DELL R440 servers, but they don't have 'IDE mode' in the BIOS setup, so Mikrotik can't find the disks. An alternative that we have already used here is to run the Mikrotik installed from a Pendrive, but this server has only USB 3.0, so it is also not detected. If possibl...

We bought some R440 and R540 for PPPoE concentrators. I tested the new CHR platforms with VMWARE, and the performance was very frustrating compared to dedicated physical machine. I would love to have some hubs in reliable and new machines, however, RouterOS up to current version 6.46 does not have s...