The problem has been resolved, I just try to setup the ICMP mangle passthrough to "NO", then the queue list traffic working.

Thanks everyone.

Which of the queue bytes is incrementing whilst you are pinging? For diagnostic purposes it may help if you stop as much other traffic as you can, and ping with a larger packet size. I'm tried stop all of my traffic in network, and pinging traffic is all in small packet queue, and not in ICMP queue...

this problem still around me, hope you can help.

is there anybody can help ? kind thanks.

as my below picture, I can see the traffic flow in ip firewall/Mangle, but why without traffic in Queue, please help, Thank you very much~~~

and below is my configration file.
both without any DNS traffic in queue list, it's strange~~~

problem resolved, I have type the wrong DNS, now change the DNS server to local gateway in DHCP server, and it's working, Thanks everyone.

did you change something in the hotspot html files? renaming, moving, deleting?

No, I try to reset all of my router with default settings, and hotspot folder created by system automatically.

I'm forgot to post the hotspot working on gateway when I add it in walled garden IP list. but can't work when I try to open any outside website.

I think something wrong/missing in my configuration, but I can't find it.

I have to reset my router (RB951Ui) in today with basic configuration, but strange problem is the hotspot page can't work any more, the IE say "404 error, can't find the page", it's happened when I open any outside website, but hotspot on the gateway IP address "172.16.0.1" is wo...

wlan2 doesn't have an IP address.

Got it, Thanks for your information.

I tried created one more DHCP server(server2) with different SSID on my RB951g, Could you please help to advise why it's always red? my configuration file as below BTW, I try to change wlan2 as bridge2, but still red. # sep/11/2014 08:54:42 by RouterOS 6.18 # software id = 6WAP-4P60 # /interface bri...

For hotspot it's a normal behavior, you cannot ping your IPS given by the HOTSPOT ... Yes you can add IP wtih IP Bindings ... And actually I dont sure what it is right way ... I dont have at this moment device for testing that, but try in DHCP server change "Bootp Support: from static to dynam...

At the Radius server you have static address or use dhcp ?

The 192.168.88.10 is the static address.

I tried to ping 192.168.88.10(Radius server) using my attached 2 configuration file from my RB951G (192.168.88.1), it's very strange with failure for "Ping Not OK", I did not find the root cause and it's look like very simple configuration and I did it in before many times. I'm sure the p...

You know the device using 192.168.88.10 must be logged in to ping it, right?

edit: Or you need to bypass that ip through the hotspot if it can't login.

Code: Select all

/ip hotspot ip-binding
add address=192.168.88.10 type=bypassed

Dear SurferTim,

It's working, Thank you vvvvery much.

I tried to ping 192.168.88.10(Radius server) using my attached 2 configuration file from my RB951G (192.168.88.1), it's very strange with failure for "Ping Not OK", I did not find the root cause and it's look like very simple configuration and I did it in before many times. I'm sure the pr...

If I need to ping the clients on the hotspot interface, I found I must use a out-interface icmp masquerade on the hotspot interface. /ip firewall nat add chain=src-nat action=masquerade protocol=icmp out-interface=ether2 If ether2 is not the hotspot interface, change that. I have to add all Hotspot...

it is normal hotspot gives dhcp you will only be able to see those ips given by the hotspot according to my experience you have to disable the hotspot for the time you want to ping clients or you ping using the ips delivered by the hotspot you ping using the ips delivered by the hotspot, what's tha...

is there anybody can help me?

Sorry, this problem resolved by myself, I forgot to setup ethernet master port.


Please close this post.

by the way, the internal devices ping each other also no problem. it means I can ping 192.168.88.10 from 192.168.88.200

the problem is why router(192.168.88.1) can't ping internal (192.168.88.10) devices?

Please advise, Thanks a lot.

It's very simple question and config file, the internal computer ping gateway router is no problem, but router can't ping internal client, (client computer without any firewall, it's a devices/machine) Please help, this problem caused I can't use Radius server, it's URGENT the configuration informat...

by the way, I try to tracert from 192.168.0.10 to 192.168.88.10

it stop at the 192.168.1.63(ether1)

and the export configuration file as attached

Outside Client: 192.168.0.10/23 Internal Client:192.168.88.10/24 Router ether1: 192.168.1.63 Router bridge1: 192.168.88.1 Routing table: 0.0.0.0/0 ether1 192.168.88.0/24 bridge1 192.168.0.0/23 ether1 without Hotspot Ping 192.168.0.10 -> 192.168.88.10 OK Ping 192.168.88.10 -> 192.168.0.10 OK with Hot...

If radius server on the local router only 127.0.0.1 right address for use.


Отправлено с моего iPad используя Tapatalk

Super Thanks for your reply.

Super Thanks for your help rextended


I have another question is why it's working after I change the share user as 3 of the default profile in HotSpot? why the default profile impact for my network? I have created another user profile call "AAA profile" in HotSpot.

I try to enable Radius for Hotsport, it's can't work with IP address 192.168.88.1, but it's works with 127.0.0.1 (both HotSpot and Radius setup the same IP address) is it correct? if it use 127.0.0.1 for ROS radius server, another ROS can't use this address, I think the 192.168.88.1 is the right one...

Did not to try rebuild the Radius database, Thanks rextended.

I try to edit the DEFAULT user profiles in HotSport to setup the Shared Users as 3

The problem has resolved, it's strange

I have another user profiles call "AA profiles", why the default user profile impact for the system?

I try to change the default profile in hotsopt as "5"

it's working perfectly.

I have enabled Radius with Hotsopt, but can not login with one user in multiple deives at the same time, I want change Port-Limit to 0, but I don't know how to do it, Please help