MikroTik

conecting

I don't have any experience with Unifi ... but I've read in another thread that Unifi controler is a pretty fat application which requires more than 1GB RAM to run. RB5009 has only got 1GB (and some of it is required to run ROS and do some firewalling/routing). So it might be that unifi controller ...

conecting

What does unifi controller have to do with a container issue??

That the code is running on routerOS 7.8

conecting

Hi ! I have issue with installing container to rb5009 with 7.9 Unifi controller on mikrotik were working perfectly before using this script : /system/device-mode/update container=yes /interface/veth/add name=veth1-unifi address=192.168.88.10/24 gateway=192.168.88.1 /interface/bridge/port add bridge=...

conecting

Hi ! I have issue with installing container to rb5009 with 7.9 Unifi controller on mikrotik were working perfectly before using this script : /system/device-mode/update container=yes /interface/veth/add name=veth1-unifi address=192.168.88.10/24 gateway=192.168.88.1 /interface/bridge/port add bridge=...

conecting

RB5009UPr+S+IN+5HPaxD2HPaxD ?

conecting

Probably it was NR7101/NR7102 or 5g cpe win.

conecting

I have also RB5009UPr and it seems to be only having passive poe not af/at. Lot of devices which are af/at do not require initial handshake+ have some tolerance on voltage so it looks like it is working properly. But from my point of view RB5009UPr doesn't implement af/at properly. So long story sho...

conecting

Wait for new device or if necessary to buy now look for nr7102 or 5g cpe win.

conecting

Hi guys,
Is there any switch which can fit k-79 rack mount ears?
I think it would be really handy to have rb5009 and some switch in same form factor.

conecting

ATL 5G kit ?
Becouse NR7101 from zyxel is really bad.
(Actually it is good, but you need extra router behind it).

conecting

Still no External /Outdoor 5G Device :(

conecting

Hi,
Does anybody tried to put Quectel RM500Q-AE inside in RBLHGGR&R11e-LTE6 ?
Will it fit ?

conecting

Hi,
Have anybody tried to put routerboard RBM11G with R11e-LTE6 mini pci express card inside of RBLHGR&R11e-LTE?
Will it fit inside?

Thanks for reply!

conecting

Chill out, man!
Just set only some ip addresses for access and you are done.

conecting

Can anybody give me some advice how to get RSSI values from cli of WAP 60G ?

conecting

Well then there should be no problem to disassemble units and change mainboard.
I see just the problem with phased array magic.

conecting

Curious to se if there Will be chance to put wap mainboard unit in to wirless wire dish. To get more power. 146mw on wap unit vs 17mW on wirless wire dish:

https://fccid.io/TV7WAPG60AD

https://fccid.io/TV7LHGG60AD

conecting

Internal and external photos not available now.
But some other specifications yes.
https://fccid.io/TV7LHGG60AD

conecting

Just today tested for 120 metres:

conecting

Hi,
also interested, anybody, know if 802.3ad is working under new SWos ?

conecting

Hi,
have anybody tested RB3011UiAS-RM with shared drive connected on USB 3.0 port for SMB or Widows share performance ?
Which speed are you getting ?

conecting

Hi guys, I have RB951G-2HnD (L4) and I have some time to play with that. Is anybody interested in ready made configuration ? Two dhcp subnets separated from each other by firewall rules.(eth0 - wan dhcp, eth1 - lan1(192.168.88.x)+ wifi, eth2 - lan2 (192.168.87.x)+ wifi) + queue tree for eth1 and eth...

conecting

deleted becouse it can not be repeated

conecting

deleted becouse it can not be repeated

conecting

deleted becouse it can not be repeated

conecting

Just associate ssid to the correct dhcp subnet for example if you have two wirless ssid than associate one to 192.168.87.0/24 and second ssid to 192.168.88.0/24

conecting

well If i understand yours configuration properly than you need just one simple firewall rule for every port. open winbox press ip-> firewall press plus button chain forward in interface ether2(or any other name depends on how you named your even port (yours fourth port should be even) out interface...

conecting

Than it is really simple open up winbox press interfaces add bridge and ethernet service for every single port And name all odd and even interfaces so you can recognise them later. also add ethernet service for both WAN and name them by different names, next configure both wan configuration you can ...

conecting

Can you share a picture of yours network ?

conecting

Hi, thanks for yours kindly reply, but I have solved the issue. My mikrotik has on firewall one rule which is droping all packets which are going from one dhcp to another (it can go only to internet). I have added one firewall rule on the top which is overpassing this rule for radius. And it starts ...

conecting

recomend you to read this thread viewtopic.php?t=90149 and also somehow modify this firewall rule open winbox. IP-> firewall add firewall rule - chain forward in interface eth1(or other name depends on your network configuration) !(negation) out interface eth3(or other name depends on your network c...

conecting

Hi it is possible to make Fail-over on mikrotik with this thread: http://forum.mikrotik.com/viewtopic.php?t=90149 but load balancing is almost unpossible also link agregation (802.3ad)on switch is almost impossible to do on mikrotik! If I can give you good advice return this device what you bought a...

conecting

Well I know that this solution is not full proper solution but it will work. open winbox. IP-> firewall add firewall rule - chain forward in interface eth5(or other name depends on your network configuration) !(negation) out interface eth5(or other name depends on your network configuration) click o...

conecting

Hi all, At first I am so glad that you are reading my post and I hope that you are going to help me! My network is setup like this: my main router Mikrotik RB951G-2HnD has on first port gateway on second port is one subnet 192.168.88.xxx on third port is another subnet 192.168.87.xxx. So what I need...

conecting

I have fixed it by myself, my router was not able to handle all queues for all radius users. Hi all, I have mikrotik RB951G-2HnD as main router and after trying to install capsman packages (and deinstall after few minutes after installation, now just using cAP 2n in setup as acess point) my download...

conecting

Hi all, I have mikrotik RB951G-2HnD as main router and after trying to install capsman packages (and deinstall after few minutes after installation, now just using cAP 2n in setup as acess point) my download speed on all conections just dropped down as shown on image: http://www.speedtest.net/result...

conecting

Zero handoff roaming between capsman units,
Also wolud love to see load balancing also between bands from 2,4ghz to 5ghz as on aruba networks becouse now I have to buy really expensive Aruba acess points to do this.

conecting

probably found a bug.
imidiatlly after login thru Winbox v3.0beta3 and hit quick set and than just hit OK button after this winbox freeze or just close itself.

conecting

Looking for step by step tutorial too. Will really appreciate it! Hello, Mikrorist there's a way that you can post a step by step tutorial ?? Hello This is how I tweaked my router.I do not regret it at all http://oi59.tinypic.com/2jbs3h1.jpg http://oi60.tinypic.com/2aabvoj.jpg i have -48db with andr...

Search found 39 matches

Re: Unifi controller on Mikrotik RB5009 7.9

Re: Unifi controller on Mikrotik RB5009 7.9

Unifi controller on Mikrotik RB5009 7.9

Unifi controller on Mikrotik RB5009 7.9

Re: New Hardware SPOILER!!! [RB L009UiGS-2HaxD] [SOLVED]

Re: 5G Antenna

Re: My RB5009UPr doesn't seem to accept PoE-in

Re: Chateau 5G + LHG?

Rb5000 series switch k-79

Re: Newsletter 108

Re: Newsletter 104

Re: RBM33G + 5G

RBLHGR&R11e-LTE + RBM11G + R11e-LTE6

Re: MikroTik News June 2018 (Issue #83)

Re: v6.42rc [release candidate] is released!

Re: LHG 60G

Re: LHG 60G

Re: LHG 60G

Re: Newsletter 78 with 1GBPS WIRELESS PRODUCT ANNOUNCEMENT!

Re: CSS326-24G-2S+RM + 802.3ad

Re: RB3011UiAS-RM

Anybody interested in file with ready made configuration ?

Re: RouterOS v6.27 released

Re: RouterOS v6.27 released

Re: RouterOS v6.27 released

Re: Creating Multiple Subnets

Re: only allow access to default gateway and internet

Re: Creating Multiple Subnets

Re: only allow access to default gateway and internet

Re: forward one port from one vlan to another vlan

Re: 2 Wan 2 Lan routerboard configuration

Re: Creating Multiple Subnets

Re: How to shutdown a port programmatically?

[solved] forward one port from one vlan to another vlan

Re: slow download speed after adding capsman unit

slow download speed after adding capsman unit

Re: Feature request for v7.x

Re: Winbox 3

Re: New - RB951G-2HnD