Hi, After upgrade CHR to 7.5 I noticed problem with incorect VPN connection state "D" flag. This is the same situation which has been fixed in 6.3x. The problem occurs PPTP and OpenVPN. I have 10 users and today I had 400 incorrect sessions with "D" flag. Mikrotik is install on v...

One application for all platforms? Android does it without any application and maybe others also....

Of course not one app
I know, that most OS has built in vpn client, but I doesn't useful if we have 30 VPN server. User would like see all available servers in one app.

Hi, I'm looking for good VPN client application (Windows, Mac, Android, iOS, with possibilities to make branding. The app should support PPTP,L2TP, OpenVPN and SSTP as well and working with Mikrotik. Do you know which VPN client could I use ? p.s I don't know where could I add this post, so if this ...

Sir i have problem rules p2p block bit torrent its gone... some one can help me fix then? dont say downgrade sir... i need solution for renew OS 6.39 thanks you Those rules did not work anyway. It is not easy to block such things due to advances in the protocols to avert blocking. Hi, I also lookin...

Hi, I'm trying configure IPsec RW with enabled L2TP/IPsec server. I have working L2TP/IPsec server, works very good. I would like add new VPN conenction like RW IPsec + local auth, finally, should be works with RADIUS auth. ip ipsec peer print Flags: X - disabled, D - dynamic, R - responder 0 addres...

Hi, I found bug in 6.37.1 with L2TP/IPsec and probably PPTP connection but i'm not sure. I use MT x86 (6.36.3) and after upgraded to 6.37.1 my clients have started inform me that L2TP/IPsec connection is disconnected after 10-15 min. They use default VPN connection on Windows 7 and 10 I checked that...

Problem with connection via PPTP in 6.33 for x86, correct login and password but got error 619 or 628.
It's looks like the same problem as 6.31 fixed in 6.32

I downgraded to 6.32.2 and works fine

Authenticaton by RADIUS for http proxy and socks

Hi, Thank you everyone for help, that was a problem with IP on OVH router, i got new one and its works :lol: Very important is correctly assigne IP to mac address on OVH portal IP address with end .254 is RouterOS gateway This is working configuration: Details about IP and mac address from hosting p...

Thank you for information, i coinfigured router as you show but doesn't work.
I can't ping gateway from Ros

Could you show me how you configured wan interface and routing to ovh server ?

hi,

my hosting provider told me that yes, i asked twice

Hi, i have vm on esx in ovh and i have a problem with configuration routing to the internet /interface ethernet set WAN mac-address=00:50:56:05:5E:11 /ip address add address=190.95.41.135/32 interface=ether1 network=195.27.27.254 /ip route add gateway=195.27.27.254 ping 8.8.8.8 timeout ping 8.8.8.8 ...

To understand, I made a test and created 2 filter rules: input chain drop 1.1.1.2 forward chain drop 1.1.1.2 and next, i have configured NAT forwarding from 1.1.1.2 to 172.16.1.10 When NAT forwading was enable , all traffic match to 1.1.1.2, went to forward chain, then drop When NAT forwading was di...

You will never see the same traffic in input and in forward chains, it is either input or forward but not both. Ok, so, if i want to get access by my main IP (assigned to the router) winbox, ssh, i have to configure ACL on input chain but If i have NAT forwarding, i have to configure ACL on forward...

src-nat: 172.16.1.10 -> 1.1.1.2 dst-nat: 1.1.1.2 -> 172.16.1.10 srcnat rule should not be required. The problem is, that traffic to the PC is not matching by firewall (chain input) Use chain forward. NAT happens before the firewall, and after redirect the traffic in question goes to chain forward, ...

Hi, Router OS installed on ESXi with 2 ethernets WAN/LAN I have configured multi public IP ( 6 IP's ) on the same interface WAN 1.1.1.1 /29 - main IP assigned to router 1.1.1.2 /29 1.1.1.3 /29 1.1.1.4 /29 I have PC behind router, connected to LAN interface and it's IP is 172.16.1.10 I made NAT forwa...

You can do it by scripting if you need the timing. Of course you realize it's going to interrupt all outbound TCP sessions every 60 seconds? No, this is for new TCP sessions. Do you have any script example ? I can do otherwise, refers to RA VPN connections ( this is main problem ) VPN user needs to...

Hi, I have 10 public IP's on my MT, and i would like change IP's every 60 sec for new one ( per user ). I use Src-nat 192.168.1.0/24 -> same 212.212.121.10-212.212.121.20 ( Not by Dst ) 192.168.1.10 --- > 212.212.121.10 after 60 sec 192.168.1.10 --- > 212.212.121.11 after 60 sec 192.168.1.10 --- > 2...

It solved at 6.19.

Thanks...

Yes, this *) sstp - make sstp work on i386 as well; fixed the problem with connection.

Thanks

I upgraded ROS x86 from 5.26 to 6.18 and I have a problem witch connection via SSTP. I received error 619, is it bug ? \\EDIT_1 I made some tests and: 5.26 - sstp works fine 6.12 - sstp works but it's the last version where sstp works well. From 6.13 to 6.18 - connection via sstp doesn't work I noti...