MikroTik

pomah

Is there any reason for "copy to access list" feature being removed in the "new" capsman?

pomah

Nope no shown under IP/arp either...

But I checked the config and yes the IP was set to static for some reason, has apparently been so since a few years, but since updating to 7.14.2 it showed to be "gone"...

Removing the static config solved the issue, thank you!

pomah

Hi guys I have a wireless client that is connected to one of the caps, it has an IP within the DHCP range and I can connect to it. But, the client is not visible in the mikrotik interface, I can see it in the wifi menu under registration, but it does not show up under the DHCP server and leases part...

pomah

Hi guys, I have upgraded my setup but for some reason I can not update my CAP AC2 to the qcom-ac package, I have done just like in the mikrotik yourube viode, draged it into files and rebooted, but everytime my cap boots up the file is gone but ther is still the old wireless package? You need to go...

pomah

Hi guys, I have upgraded my setup but for some reason I can not update my CAP AC2 to the qcom-ac package, I have done just like in the mikrotik yourube viode, draged it into files and rebooted, but everytime my cap boots up the file is gone but ther is still the old wireless package?

pomah

Hi, I have a RB5009 as capsmanager and two CAP AC as CAP''s plaeced around my house. Before I was running 6.49.10 on a HAP AC2 as capsmanager and had no issues with droped connections or anything else. Since the move to RB5009 I had to swith to 7.12.1 and now I see my PC dropping connection here and...

pomah

Ok, so I have upgraded my main capsman managaer to 7.12.1 and now I'm back and my little bypass does not seem to work anymore, anyone who knows how to fix this?

pomah

Ok, thank you, I was afraid that would be the case. Thank you for your reply.

pomah

Hi guys, I have had an IoT hardware (Ikea trådfri router) connected to the eth3 port of my HAP AC2 for a while now (3+ years). A few months ago i started to have issues with it, after updates or restarts of the main homeassistant server, the server (homeassistant) was starting to lose connection to ...

pomah

Thanks, not sure what to wait for thou... But yes i was thinking hap ax2. The 2,4ghz limit would not be an issue since it would be installed in the basement where all the internet stuff is. The caps are installed in both ends of the house on the ground floor and that is enough to cover ground floor ...

pomah

Hi guyes for home use, what would be a better choice? A L009 and CAP AX Or HAP AX with CAP AX Today I'm running a HAP AC2 with two CAP AC but I'm thinking of just trying out to simplify my setup and using just one CAP AX. I have 23 wifi devices connected currently (alot of home iot devices running) ...

pomah

Running om my HAPac2 and my two CAP AC, no issues so far.

pomah

Well I setup a DHCP on the 951 and the printer directly got an IP, so I decided to test to give it an IP in the same range as on my main network, 192.168.88.0/24 and now I can access it as I would expect. I would still love to solve my little problem, so I can manage all the configuration on the HAP...

pomah

The printer was connected over wifi, and got an IP from the DHCP that way. But the wifi is slow and unstable now that the printer is moved in to the closet. So the idea was to improve the built in ESP01 by connecting it over and 951 I had over from earlier days... Well turning the "always broad...

pomah

Hmm, so after testing, some I set it up as a PTP Brdige CPE (quick set) connecected it to the wifi and tested by hooking up my computer to eth2. Behold and my computer gets an IP, I have access to my home network servers and so on (yes I disabled the wifi on the computer). I disconnect the computer ...

pomah

Anyone? Is there anything that is unclear in my setup or question that I can clerify?

pomah

Hi See image below for my setup. home network overview.png The issue is the clients connecting over the 951 is not getting any IP from the DHCP server, the logs show this: defconf offering lease 192.168.88.82 for 10:9C:70:0E:04:1B to 4C:5E:0C:39:D0:39 without success Here is the config on the 951: #...

pomah

So to my question, will it be possible to use the HAP ac2 (running RoS v7) as CAPSMAN manager for future CAP AX devices No. AX devices require wifiwave2 driver, wifiwave2 only works with capsman2 which in turn requires wifiwave2 installed on CAPsMAN device. And you can't install wifiwave2 driver on...

pomah

Hi Just some thoughts that I have in regards to future upgrades. Today I'm running a HAP ac2 as CAPSMAN controller with two CAP AC access points spread out in my house, I have all 6 radios active since the HAP ac2 is placed in the cellar and helps with the wifi coverage in that area. Moving forward ...

pomah

and ticking...

pomah

Hi, I have recently set up a new fresh config with two cAP ac and one hAP ac², using capsman and this video for my setup: https://www.youtube.com/watch?v=taQ70m0DVYA I had only one issue during the setup and that was that the radios did not pick up my config automatically as in the video and I had t...

pomah

Do you see the dreaded 4-way Hand Shake time out in the logs?

How does that look like?

How did the TS solve the problem at the end, my two devices loses connection to the google home app once every 24h and i need to reboot them to get them to function again...

pomah

Hi I have today a wifi setup using access list (CAPSMAN) and I would like to get an email sent to me everytime someone is rejected by the system? Is that possible and could someone get me a step by step? The ideal solution would be if I would be able to get the same message that is printed in the lo...

pomah

Hairpin NAT doesn't care about SSL and anything on higher levels, it's completely transparent for that. The fact that you get 403 (assuming that you connected to the right server) means that hairpin NAT already did its job, otherwise you wouldn't be able to connect at all. You were correct, the iss...

pomah

Hello I have a for while used Hairpin NAT for my different webclients at home to be able to use the external IP to access them, I have recently upgrade one of my setups with a personal SSL ceritificate to increase the connection security, I have managed to forward port 443 to the internal server por...

pomah

Ok this fixed it self, apparently I did something very bad, I updated the freenas version to latest stable and tested the connection after that...

Latest stable had a bug that caused this behaviour and after a role back to previous version everything is working as expected.

pomah

Here is a map over how my network looks like:

pomah

Yes, the port is in the bridge:

pomah

Hello I run two CAP AC as CAPs and HAP AC2 as the capsman server. I also have a FreeNAS server that issues IP too virtual machines, being run on the server, before I when I was not running capsman, the HAP AC2 had no issues detecting these virtual machines and assigning them an IP with HAP AC acting...

pomah

Hi I am running two CAP AC in my house, HAP AC2 as capsman, one CAP AC is solo in one end of the house, the other one is in the other end of the house, connected to a switch through eth2 and on that switch I have a FreeNAS server connected. All units are connected with cable. All the physical compon...

pomah

So I think I start to get where this is going, using a cAP lite that I setup by itself, not being able to use CAPsMAN, will the clients still be able to use all of my network and see all the shares/clients no matter what AP they are connected too? Yes. Any suggestions to guides how to set it up? WD...

pomah

can I do the intial setup over cable and then put it on the wall or do it need to be connected all the time with cable? You cannot use CAPsMAN controlled wireless interface to also connect CAP to CAPsMAN, which means they have to be connected using cable all the time. is the signal strength to stro...

pomah

Could you explain this more,I am not following, is the signal strength to strong on my rb951? yes RB951 can easy cover over 200sqm Yes I agree, I am very happy with it, but how is this a problem, should not this benefit me? Or are you refering to what has been said in the first reply, regulating AP...

pomah

Using CAPsMAN is a good option, I would personally do the same. Please note, however, that CAPsMAN controlled radio cannot be used as a repeater. You will have to use a separate (cable!) connection to link you CAPsMAN and CAPs together. My plan was not to use cable, can I do the intial setup over c...

pomah

Hi My wife is not really happy with the current wifi coverage of our home network, today I use a RB951G-2HnD as both an router and wifi AP. I was thinking on buying a cAP lite and use it as an extra AP together with my current router/AP. So the new cAP lite would be extending the current wifi signal...

pomah

pomah - From which version did you upgrade? If you did use older version than 6.36 and had wireless-fp before, then this should be the reason: *) wireless - wireless-fp is discontinued, it needs to be uninstalled/disabled before upgrade; It was from 6.34, did not notice that in the changelog, but i...

pomah

Well I did the upgrade router booted up fine but I have no wifi, it was disabled after upgrade. Even after I activated the wifi package it did not want to reenable wifi. Had to reset and reinstall it all with netinstall to install v37 on it to fix the issues. Now my wife is telling me the router dis...

pomah

This is how it looks for me, nothing to update to...

Anyone else with the same issue?

I can find the current builds and the beta builds but not the bugfix, just empty screen ...

pomah

I have now tried to follow this setup: http://wiki.mikrotik.com/wiki/Manual:Default_Configurations /ip firewall filter add chain=input comment="default configuration" protocol=icmp add chain=input comment="default configuration" connection-state=\ established in-interface=ether1 ...

pomah

Hi, ok, so this is what I have now: FIlter rules: add action=drop chain=input comment="drop invalid connections" \ connection-state=invalid add chain=input comment="Allow established connections" \ connection-state=established add chain=input comment="Allow ICMP" protoc...

pomah

you can put established and related on the same rule.... (do this for both input and forward chains) Then add to forward chain: (at the end of what's already there) action=accept connection-nat-state=dstnat action=drop in-interface=ether1 (assuming that ether1 is the WAN interface) Could you explai...

pomah

You list rules configured as dst-port=xxxx / to-ports=xxxx (external / internal port numbers) Are the servers themselves listening on port xxxx or just on port 80 if you're behind the firewall? If just regular old port 80, then change "to-ports" from xxxx and yyyy to be 80 instead. The se...

pomah

You list rules configured as dst-port=xxxx / to-ports=xxxx (external / internal port numbers) Are the servers themselves listening on port xxxx or just on port 80 if you're behind the firewall? If just regular old port 80, then change "to-ports" from xxxx and yyyy to be 80 instead. The se...

pomah

You need such firewall filter rule:

chain=forward connection-nat-state=dstnat action=accept

Hi have added this but still nothing... port 80 is open as before but the ones I want to open are still closed...

pomah

Hello I seem to have trouble opening ports for outside access. I need to open up port xxxx to access a webgui and port yyyy to access another webui. Internally evertything is working, externally both port xxxx and yyyy is closed. This is my setup, directly from mikrotik wiki: IP, Firewall, NAT, Chai...

pomah

An update to this, it does not help to disconnect the ethernet cable from the tv before restart or so...

But I have made my life more simple now...

It is enough to just remove the new bride that I create and then create it again.

Could someone explain this to me?

pomah

If the export files are identical then there shouldn't be any difference between the two configurations. That is the thing, there is no difference, except for the date and version in the beggining of the file. I setup my router in the same way every time I update it. I'm thinking to try what jebz s...

pomah

The back slashes are line wrap characters. Just expand the terminal window before running export command to get as long ines as possible.

Then the files are identical, I think it is related to what jebz wrote.

pomah

I have a setup at home where ether1 and ether5 are bridged, bridgewan, all firewall rules are moved to the new bridge instead of ether1. I do this because I have my tv box on ether 5, it needs to be outside of the firewall rules. The rest of the network is connected to ether 2-4 or through wifi as ...

pomah

Jut run "export" command in console window. You can save it to a file and make a second export to file so you can compare them to see what has changed during the update. Hi, did that, this is the result, several lines look like this one: OLD file: add comment="default configuration&q...

pomah

Have you compared the export before and after the updates?

Could you explain how to do that?

pomah

Hello I'm using the cloud function on my mikrotik router, http://wiki.mikrotik.com/wiki/Manual:IP/Cloud, to reach it from work and so on. I would now like to setup hairpin rules at home so that I can use the same urls from my cellphone/laptop at home as I do outside of home. I have primeraly a webse...

pomah

Hello I have a problem that started after I downgraded my router and has stuck since. Or maybe it is a combination of newer routerOS versions and a bug in them... I have a setup at home where ether1 and ether5 are bridged, bridgewan, all firewall rules are moved to the new bridge instead of ether1. ...

pomah

How does one install this version? I need the npk file, or? Where do I get it?
http://www.mikrotik.com/download
And select the version

Thank you, newer seen that box before.

pomah

How does one install this version? I need the npk file, or? Where do I get it?

pomah

I would like to submit to RC testing, upgrade from 27 to 30 and now I lose my internet speed after 1 hour of surfing/streaming, it goes down from 100 to 3 Mb/s. So the fix for the trafficflow problem sounds about just right to me

Screenshot 2015-07-14 at 07.18.19.png

pomah

Hi could you be of help to explain to me how "print" those for me to share with you all? As for devices in my network I have 2 laptops, 2 cellphones, 1 server, 1 htpc, 1 tv box. I have a dns setup so that I can allways reach my server, but everytime I get home I need to use the interal IP,...

pomah

Hi I seem to have an issue when I have more than 4 wifi devices on my network at the same time, it seems to be connected to that same are g devices and some are n-devices. The problem is that my devices losses connection to the router and then reconnects 20 sec later, this repeates every 3-5 minutes...

pomah

This does nothing for me... How can I debug this? Hi guys I'm using the follwoing dns script to update my IP: /tool fetch address="freedns.afraid.org" host="freedns.afraid.org" mode=http src-path="dynamic/update.php\?mycode" keep-result=no This works great, now I would ...

pomah

Hi guys I'm using the follwoing dns script to update my IP: /tool fetch address="freedns.afraid.org" host="freedns.afraid.org" mode=http src-path="dynamic/update.php\?mycode" keep-result=no This works great, now I would like to setup hairpin NAT on my network, so that I...

pomah

U need hairpin NAT http://wiki.mikrotik.com/wiki/Hairpin_NAT I can access everything from outside now, must have been my dns script that failed, but internal access does not work. I followed the stops in the wiki you sent for hairpin, but it still seems not to work, anything I can upload for you yo...

pomah

Hi guys, I'm trying to open up my ports so that I can access my server from outside. I have dynamic IP from my ISP. Any comments on these rules? The problem atm is that I can not access them from inside or outside. EDIT: Used this service, http://www.yougetsignal.com/tools/open-ports/, to check if t...

pomah

Hi guys, I'm new to all of this so please help out, I have read the documentation but I'm still not able to do what I want. I have an ISP that gives me a dynamic IP. My tv is through the ISP supplier, and the cable box needs to receive its own IP straight from the ISP. So what I want is that the la...

pomah

Hi guys, I'm new to all of this so please help out, I have read the documentation but I'm still not able to do what I want. I have an ISP that gives me a dynamic IP. My tv is through the ISP supplier, and the cable box needs to receive its own IP straight from the ISP. So what I want is that the las...

pomah

Hi I have bought 951 for my work place. I have followed the guide here: http://wiki.mikrotik.com/wiki/Manual:Initial_Configuration#Static_IP_Address To setup with the static ip but the router can not connect to the internet, I get no error msg so I cant figure out what I have missed out on. I plugge...

pomah

Hi guys I have bought the RB951G-2HND for my company as a router. We have a static IP and I have tried to set it up using the same settings my old router has but without success. I have followed this giude: http://wiki.mikrotik.com/wiki/Manual:Initial_Configuration#Static_IP_Address I have done the ...

Search found 66 matches