You may use something like: https://wiki.mikrotik.com/wiki/Manual:W ... Debug_Logs

exacly over logs find problem. Radius decline MAC addres....but Xiaomi Mi Box S is setting show me completly different MAC address...log show me properly. After add it in wirelles access list...working.

Have mikrotik and try to connect over wi-fi new device Xiaomi Mi Box S (2. Generation). My wi-fi is locked only on MAC address of devices and untill now have no issues with connections. For Xiaomi Mi Box S i add MAC adress to Mikrotik, but TV box still have no possibility to connect. Is there any co...

Before upgrading the speed of the router, you should check the speed of your internet. Because maybe the reason behind this problem isn’t your router, maybe it’s the internet itself that’s causing the trouble. There are a lot of internet speed test tools but if you want to save your time and want a...

Before upgrading the speed of the router, you should check the speed of your internet. Because maybe the reason behind this problem isn’t your router, maybe it’s the internet itself that’s causing the trouble. There are a lot of internet speed test tools but if you want to save your time and want a...

have something w this: /interface ethernet set [ find default-name=ether1 ] arp=proxy-arp name=ether1-WAN speed=100Mbps set [ find default-name=ether2 ] arp=proxy-arp name=ether2-master speed=\ 100Mbps set [ find default-name=ether3 ] arp=proxy-arp name=ether3-slave-local speed=\ 100Mbps set [ find ...

test is over web page speedtest.net....CPU rate is on download test 100%, upload 70%.....i do not thing have some special config...

Last week provider upgrade speed of fiber internet to 200/50. Which i can get by plugin laptop directly to provider modem. But if there is Mikrotik RB951G-2HnD in between max speed is around 50/60?
Should do some setting is router to upgrade speed?

seems for now was firewall problem...now work fine

thanks for advice....

i am using mikrotik for several time...and now something happening to use all my upload...have even not idea where to check what was happend...
can some give me some ideas....

i was determinite that problem with speedtest where was upload almost 0, download was ok.

no one?

was even try this option: https://www.youtube.com/watch?v=8Vo9NRrLRmg - not work ;(

1. was test ip tv on Kodi via directly cable on provider modem - OK work. 2. was test ip tv on Kodi via directly cable on mikrotik router - not work.... 3. was find solution on youtube: https://www.youtube.com/watch?v=DdG2_vDUmss 4. but i am not shure about this multicast is it nessesary to install ...

ok....so only possibilities is make AP point....ya will need to survive even with that.....

ok i didn't know that my english is so bad....so first question is it AP point same as wifi extender? No. AP allows clients to connect to it, and itself is connected to the internet over cable (usually). WiFi extender is an AP + another wireless device, that connects to some other network. WiFi ext...

ok i didn't know that my english is so bad....so first question is it AP point same as wifi extender?

hi guys....was looking over google and even youtube and really can't find simple solution. I hope i am right....AP point = extender? What i want....i bought new hAP lite to make hime like AP point....usualy when i am travel i have wi-fi signal really low...so want to make it more strong to use it in...

thanks for help....was just change type=proxy arp...and everything start working....

In addition to Pukkita's suggestions, be sure to go into your lan interface's settings and set arp type=proxy arp.

u mean ether3-4 = slave or even ether 1 = gw & ether 2 = master?

Either enabling "use default gateway on remote network" or adding a route to 192.168.0.0/24 through the PPTP.

thanks for help....but do i need to put this on mikrotik side or client?

hi, i am using VPN which is already on mikrotik...PPTP which work perfect...router have static WAN IP from provider... VPN client which is come conected get local ip over VPN 192.168.0.20-22 but i cannot acess back in local network...example server have adress 192.168.0.110 & printer 192.168.0.1...

I have: Model: rb951g-2hnd Firmware: 6.24 There are 3-5 wifi clients: Mobiles (android, iOS) laptions wi-fi printers Troubles: Some times (period of 15 minutes) wifi network go down: connection android is breaking suddenly....when phone is on no using mode...when press any button on phone activation...

i am editing my router by web http://192.168.88.1/webfig/#Quick_Set model of router is rb951g-2hnd i try to edit router on static IP from provider. I have like this: Address Acquisition - static WAN IP Address - i put static IP from ISP gateway 84.255.192.1 from my ISP dns: 84.255.209.79 & 84.25...