Well resolving worked but updating doesn't still ...

Its been intermittent for me since friday.

18 hours service downtime is a bit too much...

My monitoring says outage is now 1 day, 7 hrs and 3 mins = 31 hrs in a row.

Its been at least since late Friday here in California... Is anyone looking at this from mikrotik?

I have 30 sites that I monitor using ip cloud and they've been going up and down for the last 8 hours. Lots are still showing offline.

Any chance someone at mikrotik is working on this?

I am also trying to do this, I have quite a few pfsense VPN's that use IPSEC and I'd like to switch them all over to open vpn and connect the mikrotik vpn's to the main pfsense as well. This might come a little late but ... Things that got me up and running(on the microtik hAPs): 1) Import certific...

I am also trying to do this, I have quite a few pfsense VPN's that use IPSEC and I'd like to switch them all over to open vpn and connect the mikrotik vpn's to the main pfsense as well.

Did you ever get a response on this? I'm in the same position!

does anyone have a working script with instructions for dyndns.com?

seems like the cloud service is down again.

ok well first step was confirming its not just me, second step is WTF! all of my sites that I monitor and use the DDNS for VPN are down....

Did this service die for anyone else just now? Is there some kind of network status that Mikrotik has somewhere for this service?

Please pardon my noobish question here. Right now I have my RB1100AHx2 configured with PPC load balancing over 4 WAN connections with a single LAN connection. The availability of high speed internet here is CRAP and the absolute best thing we can get is 5mb down .5up. The RB1100AHx2 has worked like...

wouldn't it be easier to just option 43 for dhcp options?

I'm a long time pfsense user and I'm looking to make the switch to mikrotik. I've been working on my config slowly over the past 6 months trying to get everything that I have in pfsense working in mikrotik and the portion that I"m stuck on right now is ipsec vpn. I've got 20 end points that I n...

Try maybe opening the plex ports... https://support.plex.tv/hc/en-us/articles/201543147-What-network-ports-do-I-need-to-allow-through-my-firewall-[/quote] Thank you so much for that, I looked everywhere to see if there were more ports needed but couldn't find them. The strange thing is I have a pfse...

I use 3 hosts for each ISP to check the availability of the Internet. This script changes the gateways in the routes if they are changed in the pppoe. ##### Script Settings ##### :local Wan1Name "pppoe1" :local Wan2Name "pppoe2" :local ComW1H1 "Static PING way by ISP1-host1...

I also have this problem but the question I have about the last comment is this, by just opening port 80 is that opening to vulnerabilities? or is that only forwarding it to the specified NAT rule? The second set of rules was intended to work with the dst-nat rules so port 80 is open to the NATed a...

I had this same problem with about 3 mikrotiks I had deployed... when I unchecked the remote resolve dns box all dns stopped on the internal network. I'm trying to add the firewall rule now to all of my routers and so far so good. Thank you!

So its safe to assume if there's nothing in the gui but the NAT rules I've added its not adding anything automatically yet... Thats what I was afraid of, I don't even know if I have it configured properly or not but with the amount of Apple devices and media devices inside this network there should ...

Is there a CLI command to view the status of UPNP mappings or the status in general, or is there something available in the web gui?

I also have this problem but the question I have about the last comment is this, by just opening port 80 is that opening to vulnerabilities? or is that only forwarding it to the specified NAT rule?

alrighty, ya basically I'm new to mikrotik and router os in general... this is my first try and getting this solution up and running and running mikrotik at all to be honest. Everything I know about it I've learned on this attempt.

is there a walk through for packet loss failover? Also is there some kind of notification to let you know when one link has failed and to notify via email or text or something?

Hey there, I've been reading your presentation and watching your video on load balancing and I'm going to give it a shot tonight. The one question I had about the complete solution is how to implement the proper failover configs so that it works with your solution? I have two ISP's 20M/20M and 60M/5...

Wow this is impressive... I"m going to be doing some reading and testing tonight!! do you have the video on policy based as well? or are the other types only available in the pdf file?

I am interested in the same exact setup, I've tried all of the available load balancing, policy routing, and failover options out there and I cannot get any of them to function properly.

I have the same setup and wanted to setup the same load balancing with failover... I've tried every guide and config cheat sheet out there and have had no luck.

what cacti templates are you using for v5 or v6? The only templates I can find are 10 years old.

Did you ever get resolution to this issue? I've been struggling with the same issues as you. I've used freenas and pfsense for years and recently switched to mikrotik but can't get the simple things to work. Its quite frustrating.

I know this is an old post but I've been struggling with this for a long time as well. I get the page to load but the plex app says it cannot reach the server from the outside. Did you figure it out or can anyone else help?

I'm having the same issue. I used the same website as the person above and verified that the port was open, I can get my plex server to start to load from the outside world however it just hangs once the gui loads up. I think it has something to do with a firewall rule or outbound rule or something?...

I have the same exact issue here. the tool listed above http://www.yougetsignal.com/tools/open-ports/ says that my port is open (Port 32400 is open on 68.186.58.237) But for whatever reason I cannot get the plex cloud to talk to my server. Is there an outbound firewall rule or something else I'm mis...