I personally don't understand why they were not implementing 2 additional SFP+ ports next to the 4x 10G RJ45, or at least 1 SFP+ port. Why always use RJ45 SFP+ modules for uplink. They are expensive and create a lot of heat.

Due to this it is not usable for me.

BR, Michael

Good morning,
why isn't the name CRS522-4XS-16XQ-2XG-RM. In reality it has 22 Ports and the 2x 10G RJ45 are not mentioned at all. I'm getting confused by the naming scheme of Mikrotik.

BR, Michael

I used following SFP+ for 10G RJ45. https://www.amazon.de/SFP-10G-T-80-kompatibel-10GBASE-T-Kupfer-Transceiver-Modul/dp/B08P32B1Y7/ref=sr_1_3?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=12SLQV0OR57Z8&dib=eyJ2IjoiMSJ9.AuaiXWNR0pccVWSjiHeQKGVzEQ5tF7H8-17l8ExrTWS_0X6k1SJFJ-RiDhacxIQgCDDUSAt...

Hi, I have a 5009 with eth1 used at 2,5Gbps as WAN (FO) and I bought some S-RJ10 to connect it to a LASN Switch 24 10G ports. The issue is quite common (as I understood later): the transceiver goes so hot ! Is there a solution (no, I cannot add fan or extra heatsink)? I saw other compatible transce...

So far so good, but what happens in Webfig when you look for the BTH Wireguard Peers. Page is continously rebuilding the list of peers (every 2 or 5 seconds).

The RB3011 has a console port on the back. So access should be always possible.

Cheers Michael

Dear Mikrotik team, especially in SOHO use cases a switch with 10G baseT ports would be very usefull. Especially when these 10G baseT ports are multirate capable. Is there anything like a CRS308-4XG-4S+IN or CSS308-4XG-4S+IN in development? Best would be in the format of the RB5009 to be a central s...

Updated RB3011, CRS317 and WPA ac without any problems

@goscickiw I like your idea, but I would prefer 4x SFP+ or 2x SFP+ & 2x 10G RJ45 and 8x 2.5 Gbit/s RJ45 Ports (incl. 4 of them with POE+). USB not needed. I would prefer RouterOS but the form factor mentioned by you. Reason for the 2 additional 10G ports is an Link to an additional 10G Switch, N...

Any update on the controller topic?

Again no 2.5 / 10 Gbit/s switch in RB5009 design.

Hi,
it's only a USB2 connector so throughput is maximum 34 MBit/s. What is the typical throughput of the USB disk? What is the actual CPU load?

BR,
Michael

For indoor usage would be an CRSx14-12P-2S+ with passiv cooling great. In combination with the CRS309-1G-8S+ it would solve all my needs at home.

BR, Michael

Upgraded an RB3011, RB4011, CRS326-24G-2S+, CRS1128-8P-4S and CRS309-1G-8S+, 2x wAP G-5HacT2HnD without issues.

I would also prefer this variant. But I my case passive cooled and desktop housing would be prefered.

Upgraded packages and firmware on 1x CHR, 1x RB3011, 2x wAP ac, 1x CRS309, 1x CRS112-8P-4S without any issues

2x WapAC ok, 1x RB3011 (no firmware update, still 7.1.1) ok

I'm waiting for a CRS 318-16P-2S+, This would be a great enhancement for my home network. If 2 or 4 POE-Ports would be 2.5 GBE it would be great.
No fans would be great and if really needed put by default a Noctua in.
Mikrotik must be aware of the switches QNAP is bringing up .

BR, Michael

Hello, I just received an used CRS326-24G-2S+IN reset it to factory defaults and upgraded it to 6.48.4. At the reboots I monitored that the LEDs for port 11/12 and 15/16 are not lit at the boot procedure. Despite the LED patern the ports are working fine. Is there any interpretation of the LEDs on /...

Hello,
don't allow access from external by firewall rule. If access from external is necessary, configure VPN and login first before accessing the router.

BR,
Michael

Hi,
removed the bridge ports, but no changes. I stay now with blocking the lease.

BR,

Michael

Hi,
problem stays.
I solved it now this way, which is not the optimum way. I made the DHCP lease static and blocked it. Since this the log message is gone.

BR,

Michael

Hi all! I have an issue with the DHCP-Server in an RB3011. In the log files I get the message: DHCP offing lease <IP Address> for <MAC of RB3011> without success. On the router itself 4 internal networks are running with 2 DHCP-Server. But there is no DHCP client on the router. Is there any idea wha...

Hello, the SFP you use inside the HEX is a dedicated single fibre SFP. A dumb splitter can be used to combine TX and Rx on both ends to a single fibre. What type of SFPs are used on the Alcatel switch? SFPs with identical specification? What type of fibers are used? To get it properly working the fi...