Makes sense. All APs have STP off and all clients aswell (Default but you never know). VLANs 33,35,55,116 all have RSTP on them on both Brocade MLX and Brocade CES ( MLX > PTP License - crs328 > PTP 24Ghz - CES. I have tried turning on RSTP on the Bridge but didnt help and cant say i programmed anyt...

Hi, Sorry its a a CRS328. Minus the 2 Fiber connections on both Cisco and MikroTik its Port for Port (Straight swap from 1 to 1 via ethernet). Currently running the last Stable Version on version 6. Yes, the uptime on the Prism APs resets to 1min or 1 hr depending on reboot. Brocade MLX -> PTP Link ...

Thank you. All UBIQ APs are on each own PoE. Currently @ 1 site I have a CRS328 being Feed from a Brocade MLX via a Licensed Link and the CRS is feed a Brocade CES2048 via a UBIQ 24Ghz PTP. When i leave the current config (made a few changes now) i will have random reboots @ for most Prism Gen2 5Ghz...

Hi, I have been having an issue with 2 CRS running RouterOS where I have 9 UBIQ Prism APs on Each. I am seeing random reboots on the UBIQs but not on any access ports or PTPs. I have a site with a UBIQ GPON and it does not reboot. The Reboots appear to be soft reboots and i believe caused by a Storm...

They only thing that comes to mind would be the distance but that does not really make much sense. Could you please provide you config so that I may look at. Hopefully we can figure out the issue.

I currently have about 5 APs on Nstreme and 20 or so on NV2. On Nstreme if there is no traffic passing I have noticed that the RX drops to 6Mbps. That said, I have not had any complaints from any customers. I hope this helps.

I have just put one up. I have an RSSI -78 with MOD of 36Mbps x2. The CPE is exactly at 1 mile away. It is currently set for 3Mbps down and 512K up. Not having any issues with the speed right now. The scores do not seem very good but this could also be due to tilt that the tower guys may have put on...