The same happens to me
I have configured IGMP Snooping on CSS
In igmp tab I can see all port where IGMP join packet are received
BUT anyway multicast is flooded as broadcast on all running interfaces...

Finally COA attribute really works...! I tested it on Mikrotik version 6.34 echo "User-Name=test,Mikrotik-Rate-Limit='1M/1M 2512K/2512K 512K/512K 600/600 2'" | radclient -x 192.168.50.3:1700 coa radsecret Sending CoA-Request of id 90 to 192.168.50.3 port 1700 User-Name = "zzztest"...

Help... not only the simple queue is deleted an added again.
But also the pppoe dynamic interface!!!!!!!!!!!!!!
I can not give any disconnection to the user.
Please Mikrotik this is not acceptable at all! fix it...., please...

This time it is really working:
This is the command:

echo "User-Name=username,Mikrotik-Rate-Limit='2M/1M 2512K/2512K 512K/512K 600/600 2'" | radclient -x 172.16.255.1:1700 coa radiussecret

The simple queue is deleted and re-created with the new values

CoA implemented in 6.33?? It does not seems to be true... [root@testhost ~]# echo "User-Name=user,Framed-IP-Address=192.168.0.2,Acct-Session-Id=81c00003,MIKROTIK_XMIT_LIMIT=512000" | radclient -x 192.168.0.9:1700 coa testing123 Sending CoA-Request of id 77 to 192.168.0.9 port 1700 User-Nam...

I've test all the version (5.X up to 6.11)
It is very easy to reproduce the problem.

I have an ospf default area with several routers. I have two ASBR router both injecting external default route into OSPF: ASBR1 and ASBR2. ASBR1 redistribute default if installed as type1 ASBR2 redistribute default if installed as type2 The local default route cost on ASBR2 is higher then the cost r...

I would like to use a RB2011/CCR with SFP modules
to use a more than 20km singlemode fiber link.
Anyone can suggest a working SFP module for such distances (30-40km)?

It is happening also to me!!!
I have several RB711 board where I can not see the wlan interface.
It happens on brand new boards, already at the first boot I can not see the wlan.
I tryed to do a system routerboard update
but nothing changed.
Any other suggestions?

Yes, I'm checking CCQ during btest. What I realized today: sending from A to B >90% ccq sending from B to A <10% ccq In A I have a working Motorola ptp installed in the same pole (2mt distance) It is working on a completely different frequency (5400 against 5700) but as soon as the Motorola tx incre...

I'm wandering if I am the only one experimenting asymmetrical ccq values in ptp links... Band: 5GHz-A/N Package: wireless-nv2 ver.4.16 Nstream enabled. Good symmetrical signal strenght -55/-56 Strange asymmetrical ccq: 18/97% That make a strange asymmetrical throughput 8000/100000 kbps The problem e...

I get the same problem.
Some hours after the reboot ssh stop working.
Running v4.9...
No ssh dude polling active.

I suspect disk problem,... I found in system menu the check-disk command. WOW I run it. But the only message I got is if I want to reboot the device. If I accept when the device is restarted any info on log (write to disk enabled) I searched info about check-disk usage on forum, wiki, manual... but ...

Hi, I'm experiencing a problem building the branding maker package. It works all fine, but the hotspot part. 1. I can put in the package my logobottom.png, but I can not put in the package the login.html page where are mikrotik addresses and link to lituanian version... 2. When the "RESET HTML&...