the most visible problem is with routeros 6.30
but we had problem in version 6.38.1 too

thanks.

Hello, i'm posting because i have a pppoe problem in my network some clients mikrotiks cpe doesn't establish pppoe session the interface is not runnig until the client disconnect from 220v and then connect again. or entering to cpe in layer2 mac telnet from the ap and disable pppoe-client interface ...

Try to upgrade the bootloader.

hi, i resolved it upgrading the routeros to v6.3 rc 1 and upgrade the bootloader.
it is working since 47 days without any problems...

regards.

Ramiro Nicolau

Hello, i configured a routerboard rb2011L as bridge1 i bridged the 10 ether ports with rstp protocol with an ip address, and with one rule chain=forward out-interface=!ether1- rx ptp action=drop in-interface=!ether1- rx ptp and is the second rb2011l that freeze from ether6 to ether10 i disconnect th...

Hi! For months we are having a problem we can not yet solve. I use this forum because I can not resolve it with support@mikrotik.com they only answered "please use latest software version" The problem is that the router stops working and needs to be restarted to continue working. We observ...

try to create this rule... chain=forward action=change-mss new-mss=1380 tcp-flags=syn protocol=tcp it worked perfect in my node.... hi AtifKhan, i think that you problem is mtu, i had the same problem with my dsl lines, did you change the mtu values? what mtu value ur suggetsing...?? ths is what we ...

hi, my users don't have public ip address, but i have users that need open ports, i'm using a load balancing with pcc, it works perfect, but when i need to portforward ports to my users, i have to mark those users to enroute through an especific route and create a rule with in interface "the in...

hi, i'm trying to do portforwarding with mikrotik 3.24 version but it doesn't work with pcc loadbalancing, i have to mark users through an especific route. the way i portforward to my clients is like this. ip firewall/mangle/nat add action=netmap chain=dstnat comment="distribuidora" disabl...

hi people, i had resolved my problem changing my router os version to 3.24, and i did my load balancing using pcc, with "both address" classifier, it works perfect. another thing is, what a mesh to pay the licence of mikrotik router os, i tried around 4 hours to get the licence code... &qu...

hi AtifKhan, i think that you problem is mtu, i had the same problem with my dsl lines, did you change the mtu values? the another way to solve your problem is mark connection dst-address and create an dstaddress list and add the public ips (but you have to put the entire network) i look for public ...

Need to make sure the connection stays on an individual interface.

thanks for your answer, but every wan has its own interface in my router, what do you recommend me?

HI PEPOPLE, I COME BACK TO THIS FORUM; I HAVE AN ISP WITH 180 SUSCRIPTORS APROX, AND I'M LOAD BALANCING WITH MIKROTIK ROUTER OS USING NTH WITH 6 WAN INTERFACES, IT'S WORKING WELL, BUT I HAVE EL LITTLE PROBLEM, SOME PROTOCOLS LIKE FTP, AND HTTPS DOESN'T WORK IN THE BALANCING, I RESOLVED TEMPORALLY TH...

thanks sergjs it worked perfectly as you said me .....

hello, i have 2 adsl lines one with 2,5mbps and the other with 640kbps, i want to mark packets that are well known ports like tcp 80, 110, 25, 20, 1863, etc and send this packets through 2,5 adsl line , and the others packets that goes for the other one adsl, i think that its the way to battle de p2...

thanks all for your comment, but i discovered the problem of low pings in wan, my upload was "overflow" i changed the limit of upload per user and it was resolved. every user is limited to 16kbps!!!! (slow upload but it is working fine).....

hi, i'm looking for someone how had the same problem... i have around 40 host in my wireless network, and when all users are using my service it turns very low... i blocked all p2p traffic but its does the same problem.... for example usually i ping http://www.google.com.ar and the ping avg is 250ms...

thanks for your comments... i'll try changing mtu and mru to 1300 then i'll post how it work..... bye bye

Hi guys, i wonder how to know whats up with my mt its run from wan interface as pppoe client, its connects perfect, after the connection i can navegate but i can't login the msn.... i tried to change the mtu packet to 1492, 1480, etc... but nothing... then i replaced the pppoeclient with a pfsense r...