Seems like Split-DNS regex matching for FWD functional doesn't work with enabled "Use DoH Server", all request immediately passed to DoH server. But for static records (TYPE A) with regex matching everything is ok, device reply regex matched answer. +1 I can confirm this behaviour. If you...

Did some more experimentatio. Untill now I have just accepted the glitch, never took the time to test things out. I found out now that the glitch only occurs when the window Interface is open, and each time that the interfaces refresh it's data, if I am holding the mouse button down to move a item ...

This issue is known and Mikrotik is working on it. It always helps to search before creating a new topic.

Thank you sindy for the reply.
My bad, This is the thread in question.

Hi, I'm using the simple L2TP server/client (not L2TP/IPSEC) in this two scenarios, and after upgrading to RouterOS 6.47 (same issue with 6.47.1) only one of the two tunnel work. If I disable tunnel 1 the tunnel 2 start working, viceversa if I disable tunnel 2. Scenario 1: https://i.imgur.com/ZxeJLR...

I can confirm that Proscend 180-T is working with RB2011 and italian VDSL2 (TIM).

Hi BigTrumpet,
I live in Italy too. I'd like to know where did you buy the module.


Bye

Thank You idleman and BlackVS, as you said I created a loop in bridge... silly me. Below the net diagram of my little "lab" setup. All this madness start with the fact that you can't set VLAN 1 on an SSID in the UniFi platform, see here . A possibile solution is to change the VLAN for the ...

Hi, I've got a series of Ubiquiti UniFi AP. These AP use a dedicated management network (vlan 8 ) and cast two SSID: one for hotspot users (traffic on vlan 100) and one for private network. The private network is on the default vlan (vlan 1). I need to bridge the collision domain from the private SS...

Hi,
thank you for the reply.

The IP address is assigned to the bridge interface.

Hi guys, I've got a strange problem on my routerboard. Adding a VLAN on a bridge makes the router unreachable via L3 and L2. Mac telnet discovery works, but connection fails. This is the configuration of the 3011. /interface ethernet set [ find default-name=ether1 ] name=ether1-LAN set [ find defaul...

Hi guys, doing some experiments on ike2 in these days. Is there a way to assign specific IP address in the VPN pool for a specific user? I would like to filter vpn traffic by user. Using L2TP/IPSEC this can be done via the l2tp server binding interface, with ike2 there is no interface, only pure rou...

If you do use bridge for local network, do you use administrative mac address for it? If not, Windows may detect different networks as the mac is set for the bridge dynamically, therefore can change as the connected ports are changing times to times.

Thank you for the reply.

Hello guys, I noticed that sometimes after a Mikrotik upgrade, and the Mikrotik is the DHCP server for the network, Windows NLA (Network Location Awareness Service) create a new network profiles. The only problem is the Windows default network profile Public. The firewall in this profile is more agg...

Up!

Up!

Hi,
Is there a way to change the default binding port (1701) of L2TP server and client on RouterOS?

Thank You.

What about the CRS series?

I have the same problem with the new RouterOS 6.22 and firmware 3.19.