MikroTik

cchance

I'm wondering we're using a box for PPPoE using the Mikrotik-Rate-Limit for setting up the dynamic queue automatically per user, we have the queue being setup still as pfifo with 1000 buffer on CCR1036 It works fine people get limited, but we are starting to think that it might be the source of some...

cchance

no guesses?

cchance

We have BGP on a 1072 with 2 providers, 1 full routing table and 1 that just ~30 routes... then we static route internally. What we've noticed is that our SNMP monitoring of the vlan facing the provider seems to have some major issues like its timing out or something when we monitor it. Whats even...

cchance

for got to say 6.32.4

cchance

we have a 1072 and we are recieving bgp tables from it not sure if that has to do with it or not, but when we monitor the oid for snmp with snmp traffic grapher, we get a red timeout line every ~60 seconds or so i've tried extending the snmp timeout to 5000ms and still it times out and gives red lin...

cchance

For 2 CCR's as edge routers, running BGP on the Internet side, and VRRP on the inside, what would be the best way to set this up for redundancy, anyone know of any examples?

cchance

How is there still no 7.0 news or alpha

cchance

And i hit my first roadblock, the lease script isn't re-running when the lease is renewed? I see it get updated values from radius, the dhcp gets sent to the client, but the script doesn't run again?!?!?!?!

cchance

Well im getting closer, radius is returning Mikrotik-Access-List = Opt82Agent-Opt82Circuit=UlKbps This builds up the circuits properly, but i'll need to have a lot of checks, like when dhcp expires a lease to remove the pcq/mangle rules IF the addresslist is empty, does dhcp lease script, run when l...

cchance

Ok basically i've run into a problem with my planning to use MT as a BNG. Plan was DHCP sends Opt-82 and Mac to radius, radius authenticate the opt-82 is an enabled customer sends back IP+Speeds for Simple queues for client. This works fine, except for the fact if customer plugs in a switch to his D...

cchance

No one with any ideas?

cchance

Is their a way to group Queues based on Option-82 value? Basically my issue is if i TAL authenticate a customer on their Option-82 thats great, they will get DHCP, pass the RB-Mikrotik-Uplink/Downlink for queue, it works. and gives them their speed queue... However, say if their are 2-3 customers on...

cchance

I have seen similar but can't narrow it down using 1036 as pppoe Concentrators simple queues setup automatically by radius attributes...

Anyone else seen this

On 6.24 I think

cchance

LOL ya poor wording on my part when i said "open" i didn't mean open source, i just meant more open with roadmap/featureplans/timelines for the beta.

cchance

stupid question whats the routing speed on the CRS, last i recall it's a switch with a pretty crappy CPU and not meant for routing in the least, or thats what someone told me previously, it's made to be used as a switch that happens to have ROS on it... Should really be using a CCR or RB unit for ro...

cchance

no news on new ccr, and i was soooo hoping to hear of a 10gb crs.... and no news on 7.0 yet

cchance

should be possible, though i have no idea how lol

cchance

we're using dhcp set to use radius, radius returns the IP and the MAX-DL / MAX-UL queues, and Mikrotik generates the queues perfectly.... No accounting because apparently MT is waiting to implement it for some reason?!?! But anyway the next issue i have is how to handle provisioning more than 1 ip t...

cchance

I just wish MT was more open with the 7.0 development, i'm really silently praying that MUM March they start to announce some things. I mean even just a "what we have working so far" "whats we want to work" " what we plan to fix in 7" something... I mean are we looking ...

cchance

Thanks normis, understood is their a timeline/roadmap for when you guys think you'll reach feature complete for beta? Or even a feature list for what your planning to implement, i mean right now all the forum seems to be is a wishlist. Things like proper DHCPv6 with radius and other v6 stuff that do...

cchance

Has anyone done any QPS tests on the DNS Caching for CCR1036 or using them as DNS Caches in production?

I'm looking to replace some ancient bluecat dns boxes, but holy crap things like infoblox are expensive even for the mid range 1400 series.

cchance

how is this not already available?!!?!?!?!?!

cchance

+1 to this for sure,

cchance

What other configuration are you guys running, i have ~700 customers on each of my boxes, though only around 140mbit at peak, dynamic queues, but my avg load is always at 0% on all cpu's i mean once in a while one will spike for a half second to 10-20% but then back to 1-2% I know you said the cap s...

cchance

No one with any ideas on this?

cchance

Use radius works but no accounting is sent for dhcp clients.

MIKROTIK PLEASE CONFIRM THIS IS GETTING ADDED\FIXED IN 6 OR 7!!!!!!?!???!?

cchance

Whats the point of a beta if you don't release it, beta's are meant to be unstable. Release the beta, and start getting broad input early.

Not like they're asking when v7 Final or even RC will be out but beta, for all we know there cud be 900 beta releases before rc1

cchance

Ok, So far i have part of this working But want to know if anyone sees anything else i'm missing. DHCP on MT with Radius for Authentication Radius sends an IP Address from its allocation table, and Bandwidth Allocation for MT Queue MT Is giving out a /32, the profile for DHCP has an x.x.x.1 as the g...

cchance

I'm talking over some ideas with some colleagues and we're looking at Ericsson CLIPS, and i just can't understand how only ericsson does the ptp ethernet connections sessions so well. Shouldn't we be able to perform almost the exact same situation with DHCP and IP Unnumbered Loopback interfaces? I'v...

cchance

Just as a heads up, i've had reports from 2 clients since taking gueue length from 100 to 500, that their livetv streaming on roku no longer buffers! But great tip on the queue length as it is showing promise .. As a note for anyone else doing this i have a CCR1036 and going from 50 to 500 with ~200...

cchance

well moved to 500, but still looks like we have issues, on our old servpoet box, no issue with streaming, via the mikrotik pppoe with queuelength of 500 we're still getting after ~10 minutes the video stops on appletv, and then if i play again it will continue, roku also is buffering randomly. Whats...

cchance

I saw their was a post way back from 2004 that someone was talking about large pppoe deloyments and the fact there was no way to limit the # of padi requests hitting the pppoe server and the possibility to flood the server and in turn the radius. I've noticed this issue on my box and even previously...

cchance

Also i saw that MQ PFIFO is an option on the CCR, why is that not the default on the CCR if its the more optimal PFIFO when supported. Or am i missing something, i haven't tried it yet... Or is it not actually supported?

cchance

i actually had seen mention of that, also saw discussion of moving to PCQ, but PCQ would require major changes (profiles on each CCR, and instead of sending speeds from radius would have to modify the way our OSS is sending data which was a pretty big no no for me. I just upgraded to 6.24 from 6.3, ...

cchance

Ya that second portion i understand i had issues with pppoe hence the upgrade :) And its a CCR and i know CCR's are under heavy development especially for 7.0 (multiprocessing etc) whenever that comes out. As for software development yes, i know major minor, but when presented as 6.3 and 6.21, i've ...

cchance

ok mind officially blown, so definitlly need to upgrade.

question in mikrotik naming convention is 6.24, 21 builds higher than 6.3?

cchance

I got my recent CCR1036-8G-2S+ to use as my pppoe concentrator, and i see that on the site it says 6.24 is the latest version, but according to my box its already running 6.3, should i back it down to 6.24 or leave it at 6.3?

cchance

I'm passing mikrotik-rate-limit from radius to a CCR1036, so simple queues get setup. Everything appears to be working well have ~900 customers online. Speed tests seem to be fine when i test, however, i've been getting complaints about streaming. Customers say it works fine for a few minutes then s...

cchance

We are busy testing cutting over from some older ServPoet boxes we have to MikroTIk CCR's, just like the better visibility into the connection the CCR's give us at the queue level etc.. Followed the basic Radius+PPPoE setup, Radius sends the speeds and the queues get setup for each client that logs ...

Search found 39 matches

Dynamic QOS PPPOE, Queue Type

Re: BGP CPU and SNMP impact

BGP CPU and SNMP impact

Re: SNMP Monitoring constant timeouts?

SNMP Monitoring constant timeouts?

BGP + VRRP?

Re: RouterOS v7.0 beta1 - when?

Re: Simple to PCQ by address list name?

Re: Simple to PCQ by address list name?

Simple to PCQ by address list name?

Re: Queues from Radius, But by Option-82?

Queues from Radius, But by Option-82?

Re: Video Streaming Issue in CCR 1036 Router Board

Re: RouterOS v7.0 beta1 - when?

Re: Very bad Speedtest.net results through Mikrotik equipment

Re: MUM Europe 2015 (live video)

Re: RouterOS DHCP + Freeradius - Queues

dhcp radius queue grouping

Re: RouterOS v7.0 beta1 - when?

Re: RouterOS v7.0 beta1 - when?

DNS Caching Performance on CCR?

Re: Feature Requests for 7.x for improved network security

Re: ADD DYNAMIC VLAN ASSIGNMENT.

Re: CCR1036 PPPoE 1000+ clients 400+ Mbit/s degraded perfomance

Re: Unnumbered DHCP Load Balancing with OSPF

Re: Feature request: DHCP accounting through Radius

Re: RouterOS v7.0 beta1 - when?

Unnumbered DHCP Load Balancing with OSPF

IP Unnumbered + DHCP (vs Ericsson Clips)

Re: Help, PPPoE+Radius streaming issues?

Re: Help, PPPoE+Radius streaming issues?

Limiting/Blacklisting PADI attacks/floods on PPPoE?

Re: Help, PPPoE+Radius streaming issues?

Re: Help, PPPoE+Radius streaming issues?

Re: 6.24, why does my box have 6.3?

Re: 6.24, why does my box have 6.3?

6.24, why does my box have 6.3?

Help, PPPoE+Radius streaming issues?

PPPoE Server, Upload Issues