Is this advice still valid? I mean, to remove the vlan tagging done by the switch CPU on a CRS125 and add vlan tagging using the Bridge?! I ask this because the MT wiki says specifically otherwise ?! Follow MikroTik's advice and do NOT do Vlan filtering on the Bridge unless you have a CRS-3xx. Do i...

Did i miss something? It's not clearly stated anywhere but you have to be very careful what you do in the switch menus with the 6.41 and above configuration because part of it is done in the bridge menus so the settings done these two ways conflict So I would recommend you to remove (or just disabl...

+1, this feature is much missed here!

Yes please, also greatly appreciated here when this feature should be made available?!

I managed to find out what my issue was. So for the sake of getting this topic marked as "Solved", here my config to successfully connect 2 tagged vlans across one cable between the CRS125 and the HAPac both on routerOS version 6.40.5. Vlan21 is used to bridge wlan traffic between the CRS1...

https://image.ibb.co/hsOofw/vlan20_21.jpg I have a setup with a CRS125-24G-1S and a HAPac 962UiGS-5HacT2HnT. I have two vlans I am sharing between the two devices using a trunk port. vlan20 - 172.18.8.0/28 vlan21 - 172.18.9.0/26 As an example for the trunk port config I looked at the VLAN Example 1...

Seems that your reply is correct because after entering the command, i can now ping all the machines on vlan888. How could i miss such simple fact :shock: ... thnx! Edit: Ok, i understand that switch1-cpu port on the switch must be able to egress packets with vlanid888 to the CPU. But how knows the ...

Hi bought myself a CRS125-24G-1S2HnD-IN and would like to connect to my servers from my workstation. Servers have several tagged/untagged VLANs attached so i configure a hybrid port for them. For the workstation i have one untagged vlan (ingress 888) and one tagged vlan (678) . Currently I'm unable ...

ok, sounds like this friend of yours deserves some good slappin. for that "Advice" :wink: So i did some configuration and setup a test lab and yes it is true that intervlan routing is on by default. All VLAN clients can connect to each other. Still i'm having trouble blocking specific traf...