Sorry for reviving old topic but I was also searching for dual rackmount for two CRS112 as I needed to mount another CRS112 and was out of space. In the end I just had to improvise and make my own - took those long brackets from both units, cut them and placed another piece of aluminium as back supp...

Well that sounds better but I still wonder what is the real power draw - how much it depends on the load etc...can somebody please measure it? Thanks

Hi, thanks for reply. But I think you tried to do something completly different (kinda higer level :D ) - the mPCIe->USB adapter I am thinking to use is just passive device. It only utilizes USB data pins that are (should be) present in mPCIe slot. So it shouldn't need any more drivers but I am not ...

Hi, can anybody please measure real power consumption of RB4011iGS+5HacQ2HnD-IN when running both wireless APs and mild traffic (or no traffic - just idle)? By the spec sheet is max power consumption 44 W but I am wondering how much it draws in real when just sitting moreless idle or under mild load...

Any progress with this issue? Maybe with newer ROS it is working? Anybody tried the USB adapter with USB LTE modem or other devices? Thx

Wow I wasn't even thinking that LTap is so problematic device. I planned buying this for some time as "this is compelted device and will work fine" and now just did quick search and found this topic...It looks I will stick with my current hap AC lite with USB modem (which I wanted to repla...

I personally don't have 100M+ internet in any location I administer, but everywhere I currently have 1G switch/router ports. Why when IP camera needs only 30Mb/s max? Because it is much easier. I simply know that I have 16ports. All 1Gb. Having few 100M and few 1Gb would result in thinking "whi...

See my post about strange sound

viewtopic.php?f=3&t=92269

If you need portable battery with 12V output, you can use the ones with quick-charge option. I have Xiaomi 2, 20Ah power bank and it supports 5V, 9V and 12V output. I designed simple micro-controller board which simulates the handshake process to negotiate 12V. All it does is to start with D+ and D-...

I wanted to use mAP for something similar but had huge problems. In 3G networks it worked fine. In our country we have 3G at 2100MHz. But once the modem switched to GSM (900MHz) or LTE (800MHz) it sometimes disappeared from mikrotik. Sometimes it re-appeared, sometimes not. I tried different modem-m...

I have international unit. I did change country but with no effect - it looks like HW problem. I have connected the less affected unit and  tried this again with all channels. It works on 1 - 6 but on 7-13 I am not able to connect. Sometimes it shows "connected" in mikrotik log but few sec...

Are you going to RMA? I will at least one unit - it is not cheap device to be this shitty! I did some modifications to second unit because of low tolerance to USB capacitive load ( http://forum.mikrotik.com/viewtopic.php?f=3&t=106174 ). But fortunatelly the second one works at 40Mhz (but only on...

Hello, today i disccovered strange fault with both my hAP ac units: 2.4 GHz radio doesn't work on higher channels and both units show different "stage" of this behaviour. The first unit works fine only if I select 20Mhz and channel 1. If I select for example channel 6 or even 11 I am not a...

Hi, i am on mobile so cant download the sound but i had some wireless noise as well on 951G. Do you have "silent boot" checked in routerboard settings? I had problems with that - with checked it put 3.3V directly on beeper and any power line noise was transduced to audible noise by the bee...

I had the same behaviour and it was wireless interference from other devices. But you wouldn't guess which - wireless mouse RECIEVER. Yes, reciever. I have PC near my hAP ac and when the PC is running and reciever is plugged in, the wifi stops working. Like 95%times it won't even connect, the other ...

Of course you can use it. It is just all about proper configuration, there is no reason why it won't work. I have Basebox5 and Huawei E3372 connected. Everything works fine

Hello, I recently upgraded RB951G to hAP AC. But unpleasant problem showed up - when I connect some devices to USB - in my case LTE modem ZTE MF823, the hAP AC reboots. I have 2 units, both do the same. The same thing happens when I do USB power reset from terminal. I investigated more and it looks ...

Hello, I have RB951G-2HnD and I noticed strange thing - when I loaded the device with some wireless traffic it produced strange sound - like hissing, fizzing etc. I was first thinking it is something about power inductors (maybe cracked and loose one etc) but when I opened the case, the sound was co...