MikroTik

wifipn

Hmm need a little more help.. NAT Rules: [admin@MikroTik] ip firewall nat> pr Flags: X - disabled, I - invalid, D - dynamic 0 chain=srcnat action=masquerade IP Addresses: [admin@MikroTik] ip address> pr Flags: X - disabled, I - invalid, D - dynamic # ADDRESS NETWORK BROADCAST INTERFACE 0 172.31.100....

wifipn

Didn't work for me!

wifipn

Hi there, can someone give me an example mangle/queue rule for limiting the bandwidth on all other ports except 80, 110, 1863, 25, 21, 3389, 6667..

I'm trying to limit my users P2P downloading to 256k and leave normal web surfing/email unthrottled..

Thanks in advance!

wifipn

RAM: 128MB
HDD: 9.5GB

Can someone tell me what the optimal settings would be for the web-proxy? I keep getting errors about not enough memory and cache getting decreased etc... eventually it stops after a while..

What can I do?
Should I disable RAM cache?

wifipn

Some intelligent person please help me! ether1 - Users - 172.31.100.100/16 ether2 - InSPire Net - 203.114.137.71/28 ether3 - Servers - 203.114.162.1/28 My ISP has given me a main public IP of 203.114.137.71, they've also given me additional public IP addresses 203.114.162.2-203.114.162.14 where the ...

wifipn

That rule is already in NAT, so I'm guessing I should try putting it in Mangle?

wifipn

Yes sorry I forgot to mention I already enabled the Web Proxy, still no go..

wifipn

I have two gateways, one for P2P traffic and one for normal surfing traffic.. I'm trying to make the Web Proxy run on the web gateway but it's not going.. I followed instructions from other users... Mangle Rule: add chain=output protocol=tcp dst-port=8080 action=mark-routing new-routing-mark=Web pas...

wifipn

I tested the load balancing by viewing some pages on my webserver and I can only see connections from one of my gateways... what's happening?

wifipn

Will the above configuration work right?

wifipn

Trying to get Load Balancing working alongside the Web Proxy.. LAN IP Address: 172.31.100.100 PPPoE Server: 172.41.100.100 Gateway1 IP: 10.1.1.1 (NIC IP: 10.1.1.3) Gateway2 IP: 192.168.1.1 (NIC IP: 192.168.1.3) ROUTE PRINT: # DST-ADDRESS PREF-SRC G GATEWAY DIS 0 ADC 10.1.0.0/16 10.1.1.3 1 ADC 172.31...

wifipn

Has this been completed yet?

wifipn

Is there any way I can allow certain users to utilise Windows File Sharing while connected to my network over PPPoE?

Right now there's about four people that wish to share files with each other but can't over PPPoE...

Help!

wifipn

I have setup my NAT and mangle rules so that all P2P traffic goes through one gateway, and all websurfing traffic goes through a seperate gateway. How can I get the Web Proxy to work? I have tried to make it work using mangle rules but the pages don't load, it just sits there with "Waiting for ...

wifipn

Yes I too need to know how to make it stop on UP, any suggestions?

wifipn

Is there any way to ban a certain MAC address from connecting to AP?

wifipn

NAT rules: 0 ;;; LAN -> WAN chain=srcnat src-address=172.31.0.0/16 action=masquerade 1 ;;; uTorrent (Adam Shaw) chain=dstnat protocol=tcp dst-port=100 action=dst-nat to-addresses=172.31.0.1 to-ports=100 2 ;;; uTorrent (Max Annear) chain=dstnat protocol=tcp dst-port=101 action=dst-nat to-addresses=17...

wifipn

Ok nevermind I downgraded and it works fine now - so now back to the Web Proxy not working problem.. Any suggestions guys? When I set the mangle rule for Web Proxy, all it says is "Waiting for reply..." and the page never loads... ideas?

wifipn

forgetting about Web Proxy, I upgraded to beta3 and now the Web traffic doesn't go through the right gateway, no options have changed and suddenl no worky... what's happened? Packet count is going up but its the wrong gateway?!

wifipn

Wireless: data from unknown device 00:00:21:FF:FF:FF, sent deauth That message appears on my RB112 almost everyday and everytime I reboot the router, what the hell is it! My SSID is hidden so I don't know if it's a nearby AP trying to connect, but that's all the message says... any ideas smart peopl...

wifipn

HELP!

wifipn

Yeah all the other mangle rules have the src address except web proxy one - still no work..

wifipn

Ok I removed the source address from the mangle but now pages don't load - I can see packet count increasing but pages stay at Waiting for reply.. and never load...Grrr!!

wifipn

Doesn't work... Web Proxy goes but traffic still going through P2P gateway... NAT: 0 ;;; LAN -> WAN chain=srcnat src-address=172.31.0.0/16 action=masquerade 1 ;;; uTorrent (Adam Shaw) chain=dstnat protocol=tcp dst-port=100 action=dst-nat to-addresses=172.31.0.1 to-ports=100 2 ;;; uTorrent (Max Annea...

wifipn

With the above combination, it makes the Web Proxy work but through the wrong gateway, also there are no packet counts in the mangle rule - like it's not even working... what have I done wrong?!

wifipn

4 ;;; Web Proxy
chain=dstnat src-address=172.31.0.0/16 protocol=tcp dst-port=80
action=redirect to-ports=8080

and that in NAT?

wifipn

9 ;;; Web Proxy
chain=output src-address=172.31.0.0/16 protocol=tcp dst-port=8080
action=mark-routing new-routing-mark=Web passthrough=no

So that in mangle?

wifipn

You need to post the complete rule of your mangle, in order us to help you.
It's really not enough to troubleshot while you only say "route-mark = web"

Well it is what you asked for wasn't it? route-mark=web - lol - Anyway above is the full print of my mangle rules, hope that helps..

wifipn

0 ;;; HTTP chain=prerouting src-address=172.31.0.0/16 protocol=tcp dst-port=80 action=mark-routing new-routing-mark=Web passthrough=no 1 ;;; POP3 chain=prerouting src-address=172.31.0.0/16 protocol=tcp dst-port=110 action=mark-routing new-routing-mark=Web passthrough=no 2 ;;; FTP chain=prerouting sr...

wifipn

route-mark = web

wifipn

Newbie needs help! Help help!

wifipn

I've read this and have got P2P going through the correct gateway and HTTP traffic through the other, just not sure how to make the Web Proxy work through the correct gateway.. if someone could give me an exact example, I would appreciate that! Web Proxy works through Port 8080 and needs to go throu...

wifipn

explanation please?

wifipn

The web proxy runs on port 8080... please help!

wifipn

I managed to get it working, with some ports being directed through one gateway (80,110,25,21,1863,3389) and everything else for P2P gateway. Problem is, the Web Proxy which I use for cache is no longer being directed through the correct gateway.. When I turn the web proxy on all HTTP traffic goes t...

wifipn

It still doesn't seem to be wokring, can you please send me examples with the gateways I provided in first message?

wifipn

that previous message was suppose to say I followed the example and no traffic!

wifipn

the example and no traffic! Garrgh!

wifipn

Doesn't seem to work - what am I doing wrong?

wifipn

Little more in depth please

wifipn

I have 2x ADSL lines: Ihug (P2P) - 10.1.1.3 - gateway: 10.1.1.1 Ihug (Web) - 192.168.1.3 - gateway: 192.168.1.1 I want to have all normal web traffic going through Ihug (Web) gateway and all P2P traffic going through Ihug (P2P) gateway - can someone walk me through the steps in doing this? *Newbie*

wifipn

Is there any way the Atheros AR5BMB5 miniPCI wireless card can be supported by Mikrotik RouterOS? I have one of these cards lying around that I would love to use, but it says it's not supported - any patch I can use? Suggestions?

wifipn

Oh and also in the RB112 route table do I need to enter gateway as 172.31.100.100?

wifipn

Ok, so basically bridge the interfaces on the RB112 - seems simple enough! Is it possible to have DHCP passthrough onto the client? So the RouterOS PC is giving out the IP addresses?

wifipn

I'm not exactly sure what you mean, have a fair idea - if you could elaboarte that would be helpful! I'll try illustrate: [RouterOS PC - connection to ISP] ether1 - 192.168.10.3 - ISP assigned IP ether2 - 172.31.100.100 - masquerading using this IP DHCP assigning IP address 172.31.0.1 ~ 172.31.0.99 ...

wifipn

Need to get this up and running soon!

wifipn

Route Table and everything associated with making it work...!

wifipn

Here's my setup.. Mikrotik RouterOS running on a PC with two ethernet ports: ether1 - 192.168.10.3 (to ISP) ether2 - 172.31.100.100 (to LAN that is plugged into switch) DHCP enabled giving IP addresses to clients (172.31.0.1 ~ 172.31.0.99) Internet works fine on LAN with computers plugged into switc...

wifipn

Hi - is there anyway I can see a realtime updating list of what URL's my client's are visiting? Also if they make POP3 connections, SMTP connections etc etc...? Cheers! Adam

wifipn

Newbie needs help! I am trying to limit a user (172.31.0.4) on P2P bandwidth only and have full bandwidth for surfing - can anyone help me with that?

wifipn

Hi there- Just wondering if anyone could tell me what settings I would need to change to allow web-proxy caching (transparently) for everything!!!

wifipn

Forgot something..

The gateway address for the 203.114.137.71 IP is 203.114.137.65..

if that helps..

Cheers

wifipn

Here's what I need to configure... ether1 = my ISP uplink providing me with multiple public IP addresses ether2 = my servers with public IP address -203.114.146.186 -203.114.146.187 -203.114.146.188 -203.114.146.189 -203.114.146.190 ether3 = my other computers wanting DHCP server support -Assigning ...

wifipn

Need help on my RouterOS box... I have ether1 and ether2. Ether1 is my ISP uplink and ether2 is my local LAN. My static IP address is 203.114.137.71. I can ping websites fine but I cant get any Internet traffic through... what have I done wrong, or not done.. Heres my settings: ether1=public ether2=...

wifipn

For the experts: What is the difference between a network card/port in a Broadband Router and a PCI Network card? I have a trangobroadband Trango Fox 5800 antenna uplink that goes to my ISP and when I plug the ethernet cable into any broadband router it works fine, when I try to plug it directly int...

wifipn

Hi there - I have the RouterOS software and am configuring with WinBox, not quite sure of what the hell I'm doing but I'm sort've getting there! Here's what I need help on... I have two ethernet cards in the router box. One goes off to my ISPs wireless uplink with my static IP being 203.114.137.71, ...

Search found 56 matches

Re: Complicated NATing

Re: How to Block client to client traffic?

Limited bandwidth for P2P

!!! Web-Proxy Errors !!!

Complicated NATing

Web Proxy + 2 Gateways Trouble

Load Balancing + Web Proxy

File Sharing over PPPoE

Web Proxy No Go!

Ok

Wireless Data from unknown device x10000

Is this what you were after?

Help?

Yes

Little more

FYI

UPDATE!

Sorry..

Sorry

I tried

Argh!

Ahhh help?

2 Gateways - How to redirect traffic

Atheros AR5BMB5 Support

Route Table

Bridging

Could you be a little more specific please?

Please help!

Need to know

Need help setting up AP!

URL List of Clients

Simple Queue Help!

How to cache everything!

Gateway

ether1/2/3 configuration help!!

Internet No Worky...

Very weird question..

Newbie Needs Help!