Upgrading wonlt change your settings .

Yea look in the ht tab in wireless interface and uncheck chain 1 both of them don't forget to align your sxt cause on mode 802 is sensitive plus if other clients have bad signal on the ap it could affect other users too

well we need to make sure where the packet loss is from tx or rx can run a bt test and check the incoming and outgoing packet loss ? whats your setup ?

alright we can make it work what configurations do u want to set ?

its clearly due the signal run a BT test with 5MB and paste the outpu of the TX/RX and check your alignment and line of sight make sure its straight forward

can u log the wireless and paste the logs here and can you paste more info like you configurations ? and tx/rx signal with ccq ?

i can help you correcting and enhancing the configurations if you like .

did u try setting multicast helper to full ?

and upgrading your firmware wouldnt affect our settings i would recommend 6.25 as most stable with no issues so far for me .

sxt lite can do up to 20km PTP i would recommend that if the alignment is set properly

As suggested before i would replace the cables just to make sure then as i see your CCQ is low for such signal maybe the signal is too powerful try to lower the TX signal if you have dual chains try to disable chain 1 and post back an image .
can you print out your wireless configuration as well ?

go to ip > firewall > nat create a masquerade rule and another rule with -dstnat- protocol -6 tcp- and chain -dstnat- and in action tab insert the ip address of the machine into - To address - and assign port 82xx instead of xx insert last 2 digits of the RB's ip example 192.168.1.15 To address : 19...

can you even try to use different pc or path ? did u remove all winbox files and temp from ur pc appdata and such ?

windbox ?
anyways are u trying to connect via mac address or ip ? you can add a rule in firewall to redirect the winbox through a port to connect to your other rb's .

did you route and masquerade ?

Maybe he can add BURST limit in the queue tree or even set the FUP daily through radius and resets every 12 hours or so

lebaneseskype1
this is my skype id

No i never use quickset, i could give you access to my RB through winbox ( read only ) so you can take a look at my structure ( not all machines would show up cause of bad configurations but still its the master rb where the bandwidth come through and out... ) and soon ill draw a structure of what i...

Skik , Maybe you should look for a better frequency with less noise or maybe you should set profile1 in security to none and add it or it could be the wireless settings like maybe you have set it as station bridge and it should be station wds or you havent configured your bridges well im not pretty ...

Probably cause your cellphone's wifi could only manage to get you on the speed of 20mb only not more .Have you tried other cellphones ?

Hey , ive been working arround with Mikrotik for about 6 monthes with an ISP i've been having recently an issue configuring an OmniTik as an AP its connected directly to a routerboard and im connecting to the omni using an SXT the issue is im not sure if the configuations are done well but since i c...

Basically if you hit up the Queues you can add a static ip for a username (only if u are using static ips ) and u can set the limit of the download and upload speed you can even add burst for it .

I'd love to see if there was a tweak for that .