MikroTik

wilsongamo

SUper thanks very much its working now

wilsongamo

from 192.168.15.0/4 a i can i see all my agencies but from them i cant see 192.168.15.0/24 /interface bridge add name=LAN /interface ethernet set [ find default-name=ether4 ] name="Wan 4G" set [ find default-name=ether2 ] name="Wan Internet" set [ find default-name=ether3 ] name=...

wilsongamo

Screen shot

wilsongamo

Thank you for the Reply But i still have a same problem 192.168.15.2 its no accessible from others routeurs . MMM MMM KKK TTTTTTTTTTT KKK MMMM MMMM KKK TTTTTTTTTTT KKK MMM MMMM MMM III KKK KKK RRRRRR OOOOOO TTT III KKK KKK MMM MM MMM III KKKKK RRR RRR OOO OOO TTT III KKKKK MMM MMM III KKK KKK RRRRRR...

wilsongamo

/interface bridge add name="MAIN LAN " /interface ethernet set [ find default-name=ether6 ] name=LAN1 set [ find default-name=ether7 ] name=LAN2 set [ find default-name=ether4 ] name="WAN 4G" set [ find default-name=ether2 ] name="Wan Internet" set [ find default-name=e...

wilsongamo

Please any help

wilsongamo

i noticed that the winbox port has change ...
what can be the reason ?

wilsongamo

Good morning All
The ip address its the good one put i can not connect to mikrotik i always have this error message :"Error could not connect to 192.168.15.1"
with the Mac address its going ...
Please help

wilsongamo

Hello to All
Please i still have a same problem
i can ping 192.168.15.1 but not 192.168.15.2 ?? why ??? please help

wilsongamo

I have problem please help LAN1 LAN2------------>LAN VPN (192.168.16.20.0/24) OK LAN VPN ----------------------> ROUTER LAN1 ,LAN2(192.168.15.1 and 192.168.16.1) OK LAN VPN ----------------------> LAN1 ,LAN2(192.168.15.2 and 192.168.16.2) fail I cannot cross 192.168.15.1 i dont know why please help

wilsongamo

ok i found the solution
1 create the VPN route
add gateway=vpn --> routing-mark= VPN
ip firewall adress-list add list address =192.168.15.0/24-192.168.24.0/24
ip firewall mangle
add chain =perouting src adrress=192.168.15.0/24 dst-list=vpnlist new routing =VPN
same thing for 192.168.16.0/24

wilsongamo

Good morning to you I followed this link "https://ajamuid.blogspot.com/2017/05/policy-base-routing-2-wan-2lan-in.html" to connect the two ISPs on Lan its working . Now i dont know what i can do to see my agencies by VPN and even the two lans are not communicating again . LAN1: 192.168.15.0...

wilsongamo

i have 75 Gb data per month how can i do to know the cosumsion of all computers

wilsongamo

Good afternoon
Please i want to know how can i get a consumed data on on interface an also know how to limit internet data on one computer (for example allow the maximuin of 5 Go to the computer )

Thanks

wilsongamo

chain forward is not working

wilsongamo

Thanks for your explain
but I dn't know how to make this
"The solution would be to have VPNs directly between all the clients [a mesh, as rjickity said]. This is more configuration to manage but will improve resilience and performance"

Thanks

wilsongamo

Hello All
My lan its 193.190.15.0/24
My comptuer 193.190.15.9
GW1 1.1.1.1
GW2 1.1.2.2

all my network computers using the GW1
want to know how to make the 193.190.15.9 uses GW2

Thanks

wilsongamo

I m not understand
please explain well
i need router for all my client

wilsongamo

HELLO
What can i do to optimize my request time
serveur to client its good
but client 1 to client 2 its very slow

thanks

wilsongamo

the tunnels ip adress

wilsongamo

Thanks
Its Working ...

wilsongamo

Follow this instructions: http://www.mikrotiktutorial.com/downloa ... te_vpn.pdf

Its not working

wilsongamo

http://www.mikrotiktutorial.com/downloa ... te_vpn.pdf

its not working

wilsongamo

Please somebody can help me ???
its not working i dn't no why
and the l2tp client its not stable (connect and disconnect ))

wilsongamo

Please somebody can help me ???
its not working i dn't no why

wilsongamo

This is my architecture Router 1 Ip public :1.1.1.2 Lan :192.16.1.0/24 Router 2 Ip public :1.1.2.2 Lan :192.16.2.0/24 My configuration Router 1 Enable L2TP Server /interface l2tp‐server server set default‐profile=Branch1 enabled=yes Create L2TP Profile /ppp profile add name=Branch1 Create Login acco...

wilsongamo

Hello xavierbt ;,
The account is connect but is not working i cannot ping the differents lan !!!!!

wilsongamo

i try but ist not working with the old configuration I had this ping 192.168.14.0/24 TO 192.168.24.0/24 OK ping 192.168.15.0/24 TO 192.168.24.0/24 OK ping 192.168.24.0/24 TO 192.168.14.0/24 OK ping 192.168.24.0/24 TO 192.168.15.0/24 Bad Bad Bad ip firewall chain=srcnat action=src-nat to adress=172.0...

wilsongamo

the ip wan of the first routeur[ lan1 192.168.14.0/24 and lan2 192.168.15.0/24 ] is 172.0.1.1
the second routeur had this wan 172.0.1.2 and lan is 192.168.24.1.
for my first routeur i can go the second but from my second i just go to 192.168.14.0/24

please help and excuse my english

wilsongamo

i have two ip adress on the same interface 14.0/24 AND 15.0/24 i wanted to know can;i do for these ip adress come out by a same wan ip 172.168.0.1

thanks

wilsongamo

What are the constraints of this implementation to have a best time of response

wilsongamo

What are the constraints of this implementation to have a best time of response

wilsongamo

What are the constraints of this implementation to have a best time of response

wilsongamo

Hello All
I wanted to know which VPN can I implement with mikrotik to connect 11 sites
with good response time

Thanks

wilsongamo

But its not working
/ip firewall filter add action=drop chain=input dst-address=192.168.0.2 src-address=192.168.0.33

wilsongamo

YES
It okay now thanks

wilsongamo

/ip address add address=10.5.8.200/32 interface=Public /ip firewall nat add chain=dstnat dst-address=10.5.8.200 action=dst-nat \ to-addresses=192.168.0.109 /ip firewall nat add chain=srcnat src-address=192.168.0.109 action=src-nat \ to-addresses=10.5.8.200 This is my configuration and it still does ...

wilsongamo

HI ,
Its not working i dnt know why.
please help me

wilsongamo

Thank You .

wilsongamo

Hi ,
I have One plublic IP I wanted to how redirect this public IP to
Local ip on my network.
Example redirect 41.202.x.x to 192.168.x.x

Thanks

wilsongamo

HI dear
I wanted to block all traffics of some machines going to the ip 192.168.0.2 even pings
Thanks

wilsongamo

Is not working wich Mac address i put a good protocol (udp) and good port for discovery and Mac 20561, 5678
But its not working .
when I block the interface it work but I want to make rules

wilsongamo

i try to block this port but it not working

wilsongamo

i try this
"
add action=drop chain=input disabled=no dst-port=5678 protocol=tcp src-address=!ip "
its not working

wilsongamo

Hi,
I wanted to know how to block discovery with WinBox on some machine on my network

add action=drop chain=input disabled=no dst-port=8291 protocol=tcp src-address=!ip
Its working fine for IP but you can still connect by mac address
Thanks

Search found 45 matches